makefile

   1 DB_NAME=census
   2 DB_USER=postgres
   3 TIGER_SRID=4269
   4
   5 # Root folder for the shapefiles.
   6 TIGER_ROOT=http://www2.census.gov/geo/tiger/TIGER2009
   7
   8 # State-specific folders.
   9 DC_ROOT=$(TIGER_ROOT)/11_DISTRICT_OF_COLUMBIA
  10 MD_ROOT=$(TIGER_ROOT)/24_MARYLAND
  11 VA_ROOT=$(TIGER_ROOT)/51_VIRGINIA
  12 PA_ROOT=$(TIGER_ROOT)/42_PENNSYLVANIA
  13 NY_ROOT=$(TIGER_ROOT)/36_NEW_YORK
  14
  15 # URLs for the TIGER/Line block-level shapefiles.
  16 DC_BLOCKS_URL=$(DC_ROOT)/tl_2009_11_tabblock00.zip
  17 MD_BLOCKS_URL=$(MD_ROOT)/tl_2009_24_tabblock00.zip
  18 VA_BLOCKS_URL=$(VA_ROOT)/tl_2009_51_tabblock00.zip
  19 PA_BLOCKS_URL=$(PA_ROOT)/tl_2009_42_tabblock00.zip
  20 NY_BLOCKS_URL=$(NY_ROOT)/tl_2009_36_tabblock00.zip
  21
  22 # Starting with PostGIS 1.4.0, these paths are calculated at install
  23 # time using the pg_config utility. Rather than try to guess where
  24 # PostGIS will wind up installed, we can just check the output of
  25 # pg_config ourselves.
  26 PG_BINDIR=`pg_config --bindir`
  27 PG_SHAREDIR=`pg_config --sharedir`
  28
  29 # Necessary to run test/data without prerequisites.
  30 #
  31 .PHONY : test data
  32
  33
  34 # The default task, since it comes first in the list.
  35 #
  36 all: clean test
  37
  38
  39 test:
  40         ./bin/run_tests
  41
  42
  43 # Remove byte-compiled python code.
  44 #
  45 clean:
  46         find ./ -name '*.pyc' -print0 | xargs -0 rm -f
  47
  48
  49 # Download the shapefiles from Tiger if they don't already exist.
  50 data: tiger_blocks tiger_lines
  51
  52 tiger_blocks: dc_blocks md_blocks va_blocks pa_blocks ny_blocks
  53
  54 dc_blocks:
  55         mkdir -p data/census2000/district_of_columbia/block
  56         if [ ! -f data/census2000/district_of_columbia/block/tl_2009_11_tabblock00.shp ]; \
  57         then                                                            \
  58                 wget -O dcblocks.zip $(DC_BLOCKS_URL);                  \
  59                 unzip dcblocks.zip -d ./data/census2000/district_of_columbia/block;     \
  60                 rm dcblocks.zip;                                        \
  61         fi;
  62
  63 md_blocks:
  64         mkdir -p data/census2000/maryland/block
  65         if [ ! -f data/census2000/maryland/block/tl_2009_24_tabblock00.shp ]; \
  66         then                                                                  \
  67                 wget -O mdblocks.zip $(MD_BLOCKS_URL);                        \
  68                 unzip mdblocks.zip -d ./data/census2000/maryland/block;       \
  69                 rm mdblocks.zip;                                              \
  70         fi;
  71
  72 va_blocks:
  73         mkdir -p data/census2000/virginia/block
  74         if [ ! -f data/census2000/virginia/block/tl_2009_51_tabblock00.shp ]; \
  75         then                                                                  \
  76                 wget -O vablocks.zip $(VA_BLOCKS_URL);                        \
  77                 unzip vablocks.zip -d ./data/census2000/virginia/block;       \
  78                 rm vablocks.zip;                                              \
  79         fi;
  80
  81 pa_blocks:
  82         mkdir -p data/census2000/pennsylvania/block
  83         if [ ! -f data/census2000/pennsylvania/block/tl_2009_42_tabblock00.shp ]; \
  84         then                                                                      \
  85                 wget -O pablocks.zip $(PA_BLOCKS_URL);                            \
  86                 unzip pablocks.zip -d ./data/census2000/pennsylvania/block;       \
  87                 rm pablocks.zip;                                                  \
  88         fi;
  89
  90 ny_blocks:
  91         mkdir -p data/census2000/new_york/block
  92         if [ ! -f data/census2000/new_york/block/tl_2009_36_tabblock00.shp ]; \
  93         then                                                                  \
  94                 wget -O nyblocks.zip $(NY_BLOCKS_URL);                        \
  95                 unzip nyblocks.zip -d ./data/census2000/new_york/block;       \
  96                 rm nyblocks.zip;                                              \
  97         fi;
  98
  99
 100 tiger_lines:
 101         bin/download_data
 102
 103
 104 # This imports the Tiger data using shp2pgsql. The shapefiles
 105 # should exist, since this task depends on the "data" task, which
 106 # downloads said shapefiles.
 107 #
 108 # After the TIGER import is done, we use the sf1blocks2sql script to
 109 # parse and import the geographic header record information.
 110 #
 111 db: data newdb tiger_blocks_table tiger_lines_table sf1_blocks_table
 112 # All Blocks
 113 #
 114 # The table already exists, so we can append to it, and we don't have
 115 # to create the GiST index.
 116         for state in data/census2000/*; do                  \
 117                 $(PG_BINDIR)/shp2pgsql                      \
 118                         -a                                  \
 119                         -s $(TIGER_SRID)                    \
 120                         -D                                  \
 121                         $$state/block/*.shp                 \
 122                         tiger_blocks                        \
 123                         | psql -U $(DB_USER) -d $(DB_NAME); \
 124         done;
 125
 126 # All Lines
 127 #
 128 # Since the table and index already exist, we can utilize -a,
 129 # and leave -I out.
 130         for state in data/census2000/*; do                          \
 131                 for shapefile in $$state/lines/*.shp; do            \
 132                         $(PG_BINDIR)/shp2pgsql                      \
 133                                 -a                                  \
 134                                 -s $(TIGER_SRID)                    \
 135                                 -D                                  \
 136                                 $$shapefile                         \
 137                                 tiger_lines                         \
 138                                 | psql -U $(DB_USER) -d $(DB_NAME); \
 139                 done;                                               \
 140         done;
 141
 142         bin/sf1blocks2sql src/Tests/Fixtures/SummaryFile1/mdgeo.uf1 sf1_blocks \
 143                           | psql -U postgres -d $(DB_NAME)                     \
 144                           > /dev/null
 145
 146
 147
 148 # First, we drop and re-create the DB_NAME database (or schema,
 149 # whatever). Then, we add PL/pgSQL support to the database.
 150 #
 151 # At that point, we import the two PostGIS files, postgis.sql and
 152 # spatial_ref_sys.sql. The postgis.sql file contains the geometry
 153 # functions, while spatial_ref_sys.sql contains a table of SRIDs, and
 154 # their associated properties. PostGIS requires both.
 155 #
 156 newdb:
 157 # Ignore the result of dropdb when it fails.
 158         dropdb -U $(DB_USER) $(DB_NAME) || true
 159         createdb -U $(DB_USER) $(DB_NAME)
 160         createlang -U $(DB_USER) plpgsql $(DB_NAME)
 161
 162         psql -d $(DB_NAME)                         \
 163              -U $(DB_USER)                         \
 164              -f $(PG_SHAREDIR)/contrib/postgis.sql \
 165              > /dev/null
 166
 167         psql -d $(DB_NAME)                                 \
 168              -U $(DB_USER)                                 \
 169              -f $(PG_SHAREDIR)/contrib/spatial_ref_sys.sql \
 170              > /dev/null
 171
 172
 173 # This just runs the SQL script to create the sf1_blocks table.
 174 sf1_blocks_table:
 175         psql -d $(DB_NAME)                      \
 176              -U $(DB_USER)                      \
 177              -f sql/create-sf1_blocks-table.sql \
 178              > /dev/null
 179
 180
 181 # Create the tiger_blocks table, and create its GiST index. Having the
 182 # table already exist makes importing via shp2pgsql much easier.
 183 # Any blocks file will work as an argument.
 184 tiger_blocks_table:
 185         $(PG_BINDIR)/shp2pgsql                                            \
 186                 -p                                                        \
 187                 -I                                                        \
 188                 -s $(TIGER_SRID)                                          \
 189                 data/census2000/maryland/block/tl_2009_24_tabblock00.shp  \
 190                 tiger_blocks                                              \
 191                 | psql -U postgres -d $(DB_NAME)                          \
 192                 > /dev/null
 193
 194
 195 # Prepare the tiger_lines table, and create the GiST index on its
 196 # geometry column. Any lines shapefile will do here.
 197 tiger_lines_table:
 198         $(PG_BINDIR)/shp2pgsql                                         \
 199                 -p                                                     \
 200                 -I                                                     \
 201                 -s $(TIGER_SRID)                                       \
 202                 data/census2000/maryland/lines/tl_2009_24510_edges.shp \
 203                 tiger_lines                                            \
 204                 | psql -U postgres -d $(DB_NAME)                       \
 205                 > /dev/null