)
where
-import Data.Array (Array, array, (!))
import qualified Data.Array.Repa as R
-import Test.HUnit
+import Test.HUnit (Assertion, assertEqual)
import Test.Framework (Test, testGroup)
import Test.Framework.Providers.HUnit (testCase)
import Test.Framework.Providers.QuickCheck2 (testProperty)
-import Test.QuickCheck (Arbitrary(..), Gen, Positive(..), choose)
-
-import Assertions
-import Comparisons
+import Test.QuickCheck ((==>),
+ Arbitrary(..),
+ Gen,
+ Positive(..),
+ Property,
+ choose)
+import Assertions (assertAlmostEqual, assertClose, assertTrue)
+import Comparisons ((~=))
import Cube (Cube(Cube),
find_containing_tetrahedron,
tetrahedra,
tetrahedron)
-import Examples
-import FunctionValues
+import Examples (trilinear, trilinear9x9x9, zeros, naturals_1d)
+import FunctionValues (make_values, value_at)
import Point (Point)
-import PolynomialArray (PolynomialArray)
-import ScaleFactor
-import Tetrahedron (Tetrahedron, c, number, polynomial, v0, v1, v2, v3)
-import ThreeDimensional
+import ScaleFactor (ScaleFactor)
+import Tetrahedron (Tetrahedron, c, polynomial, v0, v1, v2, v3)
+import ThreeDimensional (ThreeDimensional(..))
import Values (Values3D, dims, empty3d, zoom_shape)
-type CubeGrid = Array (Int,Int,Int) Cube
-
-
-- | Our problem is defined on a Grid. The grid size is given by the
-- positive number h. The function values are the values of the
-- function at the grid points, which are distance h from one
-- another in each direction (x,y,z).
data Grid = Grid { h :: Double, -- MUST BE GREATER THAN ZERO!
- function_values :: Values3D,
- cube_grid :: CubeGrid }
+ function_values :: Values3D }
deriving (Eq, Show)
make_grid :: Double -> Values3D -> Grid
make_grid grid_size values
| grid_size <= 0 = error "grid size must be positive"
- | otherwise = Grid grid_size values (cubes grid_size values)
-
-
--- | Returns a three-dimensional array of cubes centered on the grid
--- points (h*i, h*j, h*k) with the appropriate 'FunctionValues'.
-cubes :: Double -> Values3D -> CubeGrid
-cubes delta fvs
- = array (lbounds, ubounds)
- [ ((i,j,k), cube_ijk)
- | i <- [0..xmax],
- j <- [0..ymax],
- k <- [0..zmax],
- let tet_vol = (1/24)*(delta^(3::Int)),
- let cube_ijk =
- Cube delta i j k (make_values fvs i j k) tet_vol]
- where
- xmax = xsize - 1
- ymax = ysize - 1
- zmax = zsize - 1
- lbounds = (0, 0, 0)
- ubounds = (xmax, ymax, zmax)
- (xsize, ysize, zsize) = dims fvs
+ | otherwise = Grid grid_size values
+
-- | Takes a grid and a position as an argument and returns the cube
| j >= ysize = error "j >= ysize in cube_at"
| k < 0 = error "k < 0 in cube_at"
| k >= zsize = error "k >= zsize in cube_at"
- | otherwise = (cube_grid g) ! (i,j,k)
+ | otherwise = Cube delta i j k fvs' tet_vol
where
fvs = function_values g
(xsize, ysize, zsize) = dims fvs
+ fvs' = make_values fvs i j k
+ delta = h g
+ tet_vol = (1/24)*(delta^(3::Int))
-- The first cube along any axis covers (-h/2, h/2). The second
-- covers (h/2, 3h/2). The third, (3h/2, 5h/2), and so on.
k = calculate_containing_cube_coordinate g z
-{-# INLINE zoom_lookup #-}
-zoom_lookup :: Grid -> PolynomialArray -> ScaleFactor -> a -> (R.DIM3 -> Double)
-zoom_lookup g polynomials scale_factor _ =
- zoom_result g polynomials scale_factor
+zoom_lookup :: Values3D -> ScaleFactor -> a -> (R.DIM3 -> Double)
+zoom_lookup v3d scale_factor _ =
+ zoom_result v3d scale_factor
-{-# INLINE zoom_result #-}
-zoom_result :: Grid -> PolynomialArray -> ScaleFactor -> R.DIM3 -> Double
-zoom_result g polynomials (sfx, sfy, sfz) (R.Z R.:. m R.:. n R.:. o) =
- (polynomials ! (i, j, k, (number t))) p
+zoom_result :: Values3D -> ScaleFactor -> R.DIM3 -> Double
+zoom_result v3d (sfx, sfy, sfz) (R.Z R.:. m R.:. n R.:. o) =
+ f p
where
+ g = make_grid 1 v3d
offset = (h g)/2
m' = (fromIntegral m) / (fromIntegral sfx) - offset
n' = (fromIntegral n) / (fromIntegral sfy) - offset
o' = (fromIntegral o) / (fromIntegral sfz) - offset
p = (m', n', o') :: Point
cube = find_containing_cube g p
- -- Figure out i,j,k without importing those functions.
- Cube _ i j k _ _ = cube
t = find_containing_tetrahedron cube p
+ f = polynomial t
+
-
-zoom :: Grid -> PolynomialArray -> ScaleFactor -> Values3D
-zoom g polynomials scale_factor
+zoom :: Values3D -> ScaleFactor -> Values3D
+zoom v3d scale_factor
| xsize == 0 || ysize == 0 || zsize == 0 = empty3d
| otherwise =
- R.force $ R.traverse arr transExtent (zoom_lookup g polynomials scale_factor)
+ R.force $ R.unsafeTraverse v3d transExtent f
where
- arr = function_values g
- (xsize, ysize, zsize) = dims arr
+ (xsize, ysize, zsize) = dims v3d
transExtent = zoom_shape scale_factor
-
-
+ f = zoom_lookup v3d scale_factor
-- | Check all coefficients of tetrahedron0 belonging to the cube
| i <- [0..2],
j <- [0..2],
k <- [0..2],
+ c0 <- cs,
t <- tetrahedra c0,
let p = polynomial t,
let i' = fromIntegral i,
let k' = fromIntegral k]
where
g = make_grid 1 trilinear
- c0 = cube_at g 1 1 1
+ cs = [ cube_at g ci cj ck | ci <- [0..2], cj <- [0..2], ck <- [0..2] ]
test_zeros_reproduced :: Assertion
k <- [0..2],
let i' = fromIntegral i,
let j' = fromIntegral j,
- let k' = fromIntegral k]
+ let k' = fromIntegral k,
+ c0 <- cs,
+ t0 <- tetrahedra c0,
+ let p = polynomial t0 ]
where
g = make_grid 1 zeros
- c0 = cube_at g 1 1 1
- t0 = tetrahedron c0 0
- p = polynomial t0
+ cs = [ cube_at g ci cj ck | ci <- [0..2], cj <- [0..2], ck <- [0..2] ]
-- | Make sure we can reproduce a 9x9x9 trilinear from the 3x3x3 one.
--
-- Example from before the fix:
--
--- > b0 (tetrahedron c 15) p
--- -3.4694469519536365e-18
+-- b1 (tetrahedron c 20) (0, 17.5, 0.5)
+-- -0.0
--
test_tetrahedra_collision_sensitivity :: Assertion
test_tetrahedra_collision_sensitivity =
assertTrue "tetrahedron collision tests isn't too sensitive" $
- contains_point t15 p
+ contains_point t20 p
where
g = make_grid 1 naturals_1d
- cube = cube_at g 0 17 1
- p = (0, 16.75, 0.5) :: Point
- t15 = tetrahedron cube 15
+ cube = cube_at g 0 18 0
+ p = (0, 17.5, 0.5) :: Point
+ t20 = tetrahedron cube 20
prop_cube_indices_never_go_out_of_bounds :: Grid -> Gen Bool
idx_z <= zsize - 1
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). Note that the
+-- third and fourth indices of c-t10 have been switched. This is
+-- because we store the triangles oriented such that their volume is
+-- positive. If T and T-tilde share \<v1,v2,v3\> and v0,v0-tilde point
+-- in opposite directions, one of them has to have negative volume!
+prop_c0120_identity :: Grid -> Property
+prop_c0120_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 1 2 0 ~= (c t0 1 0 2 0 + c t10 1 0 0 2) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). See
+-- 'prop_c0120_identity'.
+prop_c0111_identity :: Grid -> Property
+prop_c0111_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 1 1 1 ~= (c t0 1 0 1 1 + c t10 1 0 1 1) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). See
+-- 'prop_c0120_identity'.
+prop_c0201_identity :: Grid -> Property
+prop_c0201_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 2 0 1 ~= (c t0 1 1 0 1 + c t10 1 1 1 0) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). See
+-- 'prop_c0120_identity'.
+prop_c0102_identity :: Grid -> Property
+prop_c0102_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 1 0 2 ~= (c t0 1 0 0 2 + c t10 1 0 2 0) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). See
+-- 'prop_c0120_identity'.
+prop_c0210_identity :: Grid -> Property
+prop_c0210_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 2 1 0 ~= (c t0 1 1 1 0 + c t10 1 1 0 1) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | Given in Sorokina and Zeilfelder, p. 80, (2.9). See
+-- 'prop_c0120_identity'.
+prop_c0300_identity :: Grid -> Property
+prop_c0300_identity g =
+ and [xsize >= 3, ysize >= 3, zsize >= 3] ==>
+ c t0 0 3 0 0 ~= (c t0 1 2 0 0 + c t10 1 2 0 0) / 2
+ where
+ fvs = function_values g
+ (xsize, ysize, zsize) = dims fvs
+ cube0 = cube_at g 1 1 1
+ cube1 = cube_at g 0 1 1
+ t0 = tetrahedron cube0 0 -- These two tetrahedra share a face.
+ t10 = tetrahedron cube1 10
+
+
+-- | All of the properties from Section (2.9), p. 80. These require a
+-- grid since they refer to two adjacent cubes.
+p80_29_properties :: Test.Framework.Test
+p80_29_properties =
+ testGroup "p. 80, Section (2.9) Properties" [
+ testProperty "c0120 identity" prop_c0120_identity,
+ testProperty "c0111 identity" prop_c0111_identity,
+ testProperty "c0201 identity" prop_c0201_identity,
+ testProperty "c0102 identity" prop_c0102_identity,
+ testProperty "c0210 identity" prop_c0210_identity,
+ testProperty "c0300 identity" prop_c0300_identity ]
+
grid_tests :: Test.Framework.Test
grid_tests =
testGroup "Grid Tests" [
trilinear_c0_t0_tests,
+ p80_29_properties,
testCase "tetrahedra collision test isn't too sensitive"
- test_tetrahedra_collision_sensitivity,
- testCase "trilinear reproduced" test_trilinear_reproduced,
- testCase "zeros reproduced" test_zeros_reproduced ]
+ test_tetrahedra_collision_sensitivity,
+ testProperty "cube indices within bounds"
+ prop_cube_indices_never_go_out_of_bounds ]
-- Do the slow tests last so we can stop paying attention.
slow_tests :: Test.Framework.Test
slow_tests =
testGroup "Slow Tests" [
- testProperty "cube indices within bounds"
- prop_cube_indices_never_go_out_of_bounds,
- testCase "trilinear9x9x9 reproduced" test_trilinear9x9x9_reproduced ]
+ testCase "trilinear reproduced" test_trilinear_reproduced,
+ testCase "trilinear9x9x9 reproduced" test_trilinear9x9x9_reproduced,
+ testCase "zeros reproduced" test_zeros_reproduced ]
projects / spline3.git / blobdiff