Upstream source.

[postfix-logwatch.git] / Changes

2014-09-03 (version: 1.40.03)
 - Fix:  Corrected typo in RE for postscreen PREGREET & HANGUP fix was lost in merge.
   Thanks: Michael Orlitzky

2014-08-28 (version: 1.40.02)
 - Fix: Commented out some code which was accidentally left enabled, preventing the
   script from running.

2014-08-01 (version: 1.40.01)
 - Fix: Correct TLS matching for Postfix 2.11 and later. Thanks: John Wilcock
 - Fix: Ignore cfg_get_str debug lines. Thanks: Bas Mevissen
 - Fix: Ignore sacl_check:... lines. Thanks: Jonathan Herbach

2012-01-11 (version: 1.40.00)
 - Change: License is now the MIT/X-Consortium License:
   http://www.opensource.org/licenses/mit-license.php
   This allows re-inclusion into the logwatch project.
 - Fix: Ignore additional debug lines. Thanks: Peter Smrcak
 - Fix: Corrected typo in RE for postscreen PREGREET & HANGUP.

2011-09-26 (version: 1.39.07)
 - New: Support 2.9's enable_long_queue_ids via command line option
   --[no]long_queue_ids and config file var $postfix_Enable_Long_Queue_Ids. 
   Default is disabled.  There will be issues with existing logs that contain
   both formats.
 - Fix: Support postscreen's WHITELIST VETO.
 - Thanks: Noel Jones

2011-09-23 (version: 1.39.06)
 - New: Support postscreen from postfix 2.8.  Updated for minor dnsblog 
   log changes. Note: tlsproxy messages are ignored for now.
 - Change: Section dnsblog primary sort key is now listing site.
 - Fix: Some "improper command pipelining" log lines were unmatched
   (section: smtpprotocolviolation).
 - Fix: Ignore proxy-reject w/no SMTP reply code.  Occurs after a queue file
   size lmit exceeded warning by smtpd.
 - New: Postfix 2.8.1 changes FCRDNS warning messages (section: hostnameverification).
   See: http://article.gmane.org/gmane.mail.postfix.user/218112
 - Internal: Removed remaining $re_IP in rblerror section, from v1.39.05.
 - Thanks: Noel Jones, Tonio, Jase Thew, Alex, Michael Orlitzky

2010-11-12 (version: 1.39.05)
 - Fix: Check input value to commify() against undef; required for perl 5.12.
   Thanks: Michael Orlitzky
 - Fix: Eliminate use of $re_IP, as it is too complicated, expensive, and did
   not correctly match all valid IPv6 addresses.  Note: one remains in
   RBL lookup error section, as parsing out IP is nontrivial  w/IPv6.
 - Internal: Update URL to Sourceforge.

2010-03-23 (version: 1.39.04)
 - Fix: Support Postfix 2.8's reject_rhsbl_reverse_client in RejectRBL.
   Thanks: Noel Jones

2010-03-06 (version: 1.39.03)
 - Fix: Support for reject_rhsbl_helo in RejectRBL section.
   Thanks: Steve Bytnar

2010-03-03 (version: 1.39.02)
 - Change: Merged section SaslAuthRelay into SaslAuth.  The purported SASL
   sender is now included after an existing SASL_username.

2010-03-02 (version: 1.39.01)
 - New: Allow enabling/disabling the summary section in config file, using
   var $postfix_Show_Summary and command line option --[no]summary.
   Thanks: Benedikt Bohm

2010-01-11 (version: 1.39.00)
 - New: Support 2.7 experimental branch logging:
      + smtpd's proxy-reject: placed in standard reject sections.
      + smtpd's proxy-accept: ignored.
      + postfix/postscreen: new section 'postscreen'.
        Note: memory intensive, so limiter is set to 1, showing only counts
        of various postscreen result.
      + postfix/dnsblog: new section 'dnsblog'.
        Note: memory intensive, so limiter is set to 1, showing only a list
        of DNSBL'd IPs.  Disable this section by setting limiter to 0.
      + postfix/verify: currently ignored
      Thanks: Stefan Forster, Noel Jones
 - New: Support 2.6 access(5) action BCC.  New section 'bcced'.
 - New: New option --[no]unknown to show/suppress output of hostname of
   'unknown' in formatted ip/hostname pairs.  Default: on.
 - New: Updated postfix-logwatch.conf files to include instructions on how to
   increase log scanning performance when not using policy services such as
   policy-spf, etc.  See "Performance Note" in the .conf files.
 - Change/Fix: Warning sections 'ratelimit and 'concurrenclylimit merged into
   a new, generic 'anvil' section, which includes all of anvil's various limit
   exceeded messages.  If you see errors after updating about these unknown
   limiters, be sure to replace these two deprecated limiters with the new
   one to your config file(s).
 - Change: Use DSN from delivery verification probes as first level
   key (section: 'deliverable').
 - Change: Replace databasegeneration section header 'Database file
   needs update' with 'Database is older than source file', as per request
   on the Postfix mailing list.
 - Fix: Handle more, and restructure, SASL authentication failed messages.
   Thanks: Stefan
 - Fix: Ignore some smtpd cache lines; handle postmaster delay notifications.
   Thanks: Gabriele Beltrame
 - Fix: Handle more postfwd lines.
 - Fix: Prevent useless level 3 ':' output in section 'saslauthfail'.
   Thanks: Armin Tüting
 - Fix: Corrected some typos in man page.
 - Fix: Added missing Error section (how was this missed!).
 - Fix: Handle unmatched milter-{reject,hold,discard} lines that do not
   include smtpd envelope data.
 - Fix: reduce memory footprint for Delays reports (~30Mb per 1Mb log file).
 - Fix: performance increases.

2009-07-14 (version: 1.38.01)
 - Fix: RE typo caused policydweight lines to be unmatched.
 - Fix: Reduce to-be-ignored RE list searching by moving most common
   REs to head of the list.

2009-07-10 (version: 1.38.00pre6)
 - Fix: Handle Softfail and Temperror in pypolicyd-spf (PolicySPF).
   postfix/policy-spf.  Thanks: Chris Burton.

2009-07-10 (version: 1.38.00pre5)
 - Fix: Comment out extra OnlyService line in postfix-logwatch.conf* files,
   leaving as a sample.  The duplicate causes logwatch to filter out postgrey,
   postfwd, and policyd-spf lines.  Also include '-' in the RE to capture
   postfix/policy-spf.  Thanks: Malte Koestner, Chris Burton.

2009-07-07 (version: 1.38.00pre4)
 - New: Error and diagnostic output from non-postfix programs will be moved
   into the WarningsOther section.
 - Fix: Added Tarpit whitelisted to postgrey output.
 - Fix: Handle additional output for pypolicyd-spf, postgrey, and postfix.
 - Fix: Add policyd-spf to postfix_Syslog_Name and OnlyService.
   Thanks: Chris Burton
 - Fix: logic error which inadvertently incremented Notification Sent counter
   on ignored postfix/bounce lines.
 - Fix: Add -T to interpreter line (removed inadvertently to use perl debugger).
 - Change: Remove 'postgrey' from default syslog_name.  This only affects users
   without a configuration file, where it is enabled by default.

2009-07-06 (version: 1.38.00pre3)
 - New: Handle pypolicyd-spf.  Thanks: Chris Burton
 - New: ConnectionInbound section shows IP/hostname.  Disabled by default,
   for performance reasons.  Requested by: Jernej Porenta
 - Change: MxErrors changed to DNSErrors, generalizing DNS lookup errors.
   A beneficial side affect is the removal of the numerous DNS lookup
   informational "warnings" from the top of the Summary section; they
   can also, of course, be disabled in the Detailed section.
 - Fix: Handle END-OF-MESSAGE stage in reject code.

2009-07-02 (version: 1.38.00pre2)
 - Fix: Remove debug print
 - New: Section SMTP protocol violation (smtpprotocolviolation)
 - Change: Removed section "toomanyerrors", merging it into new section
   smtpprotocolviolation.
 - Fix: Handle "improper command pipelining ..." messages in new section
   smtpprotocolviolation.
 - Fix: Ignore more debug lines and miscellaneous canonicalization.

2009-06-29 (version: 1.38.00pre1)
 - New: Support milter-hold (aka: "quarantine") and milter-discard lines.
   Stats are located in "hold" and "discarded" sections, respectively.
   Requested by: Gary Casterline;
 - Fix: Perl v5.10 introduces tighter taint control in sprintf format 
   strings.  Perform strict data checking on $Opts{'ipaddr_width'} to
   untaint it, as it is used directly as an sprintf() field width specifier.
   Thanks: Dudi Goldenberg
 - Fix: Some Policy-SPF lines were unmatched, due to log format change
   in Mail::SPF v2.006, which changed "identify=mfrom" to "identity=mailfrom".
   Thanks: Chris Burton
 - Fix: Resolved several bugs in the Policy-SPF module: some missing return
   return statements, which for certain unmatched log lines would both add to
   the Unmatched list and increment a PolicySPF hit counter; a few older
   log lines would show blank IP addresses.
 - Fix: Postgrey whitelisted lines that did not include a host IP address
   were reported as unmatched.
 - Fix: Relax email address capture in to=, orig_to=, and from= fields in
   log lines.
 - Fix: Better diagnostic when limiter level is not specified on
   the command line using the --limit option.  Eg:
   "--limit rejectbody" v. "--limit rejectbody=10"
 - Fix: Remove bogus --content_filter option from man page (feature not yet
   implemented).  Thanks: David DeFranco
 - Fix: Better handle "Delivery temporarily suspended: conversation with xxx timed
   out..." deferred messages.
 - Fix: Handle multi-word XYZ in "blocked using XYZ" in RejectRBL.
   Thanks: Sergey Pylinsky
 - Fix: Ignore lines from postlog service.
 - Change: Detail level now included in Detail title
 - Internal: Support variable hash key lengths, but using the special key
   sequence of two ASCII bell's ("\a\a").  This removes the existing 
   requirement that dummy keys must be used at the end of the %Counts 
   accumulator hash.
 - Internal: Test data generation

2008-10-21 (version: 1.37.08)
 - Fix: Saslauth messages were not being detected if the only field in a
   smtpd "client=..." line was "sasl_sender=".

2008-10-20 (version: 1.37.07)
 - New: Support "Temporary lookup failure" temporary rejects.  New reject
   limiter 'XXXrejectlookupfailure', where XXX is any of the set of
   reject codes in effect.
 - New: Support smtp_body_checks and smtp_*header_checks.
   Requested by: Noel Jones
 - Fix: Previous fix to support reload log line that includes postfix
   version number broke previous postfix reload log lines.
   Thanks: Armin Tüting
 - Fix: Setting recipient_delimiter caused RE failure, due to missing
   \Q \E quoting.  Thanks: Armin Tüting
 - Fix: BCC action support from 1.37.06 had a "if" vs. "elsif" typo.
   Thanks: Noel Jones
 - Fix: Allow postgrey filter to handle absent recipient= field.
   Thanks: Alexander Kolesnik
 - Fix: Limiters were not case insensitive on the command line.
 - Fix: Use of bare reject limiters did not set each reply code variant of
   the given limiter after using --nodetail, resulting in no output for the
   given section.
 - Fix: Change Logwatch's OnlyService variable in the postfix-logwatch.conf
   file to also capture postfwd and postgrey.  Thanks: Alex Schuilenburg
 - Fix: Ignore more debug lines.

2008-08-22 (version: 1.37.06)
 - New: Handle message_reject_characters cleanup rejects.  New reject
   limiter 'XXXrejectcontent', where XXX is any of the set of reject
   reply codes in effect.
 - New: Support BCC action from 2.6 experimental branch.  New limiter
   'bcced'.
 - Fix: Ignore "mapping DSN status" lines.
 - Fix: Support reload log line including postfix version number.
   Postfix snapshot 2.6-2008081
 - Thanks: Noel Jones
 - Fix: Ignore more debug lines.

2008-08-19 (version: 1.37.05)
 - New: Initial implementation of Postfwd reporting.
   Requested by: Sahil Tandon
 - Change: Undeliverable (address verification) section now
   grouped by DSN, canonicalized host reply, domainpart, localpart,
   and formatted host/hostip.  This dramatically cleans up this
   section's output for systems that perform many address verifications.
 - Fix: Postgrey lines were being ignored due to change made to
   implement Ignore_Service.
 - Fix: handle "status=undeliverable-but-not-cached" address verification
   response,  which is coerced into a simple "status=undeliverable".
   If there is any value in distinguishing the two status types, let me
   known and I'll create a new limiter. Thanks: Gary Casterline
 - Fix: missed conversion of keyword "next" to "return" in postfix_postsuper
   routine after inline code was converted into the subroutine.

2008-07-22 (version: 1.37.04)
 - Fix: recognize "approximately" in TooManyErrors section messages
   starting introduced in Postfix 2.6 20080621.  Thanks: Noel Jones
 - Fix: Reset to level 0 the inadvertently changed EnvelopeSenders
   and EnvelopeSenderDomains (in postfix-logwatch.conf).

2008-07-18 (version: 1.37.03)
 - Change: TimeoutInbound will include byte count if available;
   default level changed to 1 to reduce noise.
 - Change: some additional canonicalization is performed on
   various "host XXX said: yyy" messages in sections like Deferrals.
   Much of the "said" verbiage from some large mail houses is redundant
   or excessive, and causes additional memory consumption.  If this
   canonicalization presents problems, I may include an additional level
   of detail to present the raw message.  Feedback welcome.
 - Fix: Supplemental sections could not be re-enabled after using
   --nodetail.
 - Fix: Handle some additional RejectRBL variants, esp. the
   "day old bread" list (dob.sibl.support-intelligence.net).
   Thanks: Michael Monnerie
 - Fix: Present the remote MTAs reply code/DSN, if available, at the
   beginning of canonicalized "host XXX said: yyy" messages.
   Thanks: Jorey Bump
 - Fix: Provide remote MTAs SMTP reply code/DSN if available
   in various Delay, Deferral, etc. reports.  Some additional
   canonicalization is performed on various flavors of deferral
   replies.
 - Fix: recognize "approximately" in lost connection byte count
   messages starting introduced in Postfix 2.6 20080621. 
   Thanks: Noel Jones
 - Internal: Ignored lines are now placed into a list, instead of
   hard coded into the code.  In the future, this will allow users
   to configure ignore patterns without making code modifications.
   In doing this, I discovered and reported a bug in perl (#56202),
   but worked around the problem.
 - Internal: move postsuper, panic, and fatal message processing into
   their own subroutines.

2008-05-30 (version: 1.37.02)
 - Change: Some changes in Delays report. Now includes total delay
   time as reported in delivery agent log entry delay=x.  Removed
   leading numbers in row titles, and cleaned up the title names.
   Also, reduced fields to 2 decimal places.
 - New: By IP (permanent) Reject report controlled with ByIpRejects
   limiter.  Disabled by default.
 - Fix: Two minor fixes to PolicydWeight module: it was not the required
   importing inc_unmatched, and ignore diagnostic "master: ..." lines.
 - Fix: Eliminate some extraneous newline output.
 - Fix: Ignore more debug log lines.

2008-05-09 (version: 1.37.01)
 - Change: level limiters are no longer unique command line options,
   but are now parameters to the single option "--level" or "-l".
   This reduces the number of command line options in the help list,
   and simplifies the code added to support reject_reply_patterns.
   For example, the config file level limiter $postfix_Sent = 2,
   the command line option would be --limit sent=2 or -l sent=2,
   rather than the previous --sent=2.  This also means the --no 
   variants for level limiters are gone (eg. --nosent; instead use
   -l sent=0).  There is no change within the configuration files.
   Limiters can still be abbreviated so long as they are unambiguous.
 - Change: Section connectionlostoverload is removed, by being merged
   into connectionlostinbound.
 - Change: PrematureEOI is now AttrError, broadened to include errors
   reading attributes from services.
 - New: Support RFC 4954 Enhanced status codes (postfix 2.5+).
 - New: Report "status=deferred (bounce failed)" messages under
   Summary section "Bounce failed".
 - New: Support postfix 2.6+ check_reverse_client_hostname_access
   Includes new reject config variable: RejectUnverifiedClient.
 - New: option --line_style specifies how to handle lines lengths
   longer than max_report_width.  Options are "wrap", "full", or
   "truncate" (default).  The older --detail >= 11 is equivalent
   to line_style=full; line_style=truncate or line_style=wrap has
   higher precedence and will dictate how long lines are handled.
   Alternative options are --truncate, --wrap, or --full.
 - New: The beginnings of a Top N config file is provided in 
   postfix-logwatch.conf-topn.  Suggestions and improvements welcome.
 - New: single letter options for some long options; run with
   --help to see list.  More may be added in the future.
 - New: Option --ignore_services (config var $postfix_Ignore_Services)
   provides a mechanism to ignore postfix/SERVICE log lines, where
   SERVICE is a regular expression pattern.
 - Fix: Support Anonymous TLS in TlsServerConnect (postfix 2.5+).
 - Fix: Ignore output from "postfix status" command (postfix 2.5+)
 - Fix: Ignore more debug log lines.
 - Fix: When postsuper held more than one message in a given call,
   the Hold count shown in the Summary section indicated how many
   messages were held, but the Detail section showed how many 
   postsuper calls were made. Thanks: Stefan Jakobs
 - Fix: Postgrey sender and recipient fields improperly reported
 - Fix: Allow ":unknown" as an acceptable port in smtpd's "client=..."
   log lines.  Occurs in pre-queue content_filter setup.
   Thanks: Robert Brooks
 - Fix: At detail > 10, log lines were truncated to max_report_width.
 - Fix: Documentation cleanup.  Thanks: Chris Pepper
 - Fix: Relax capture RE for resent-message-id which may contain
   < or > chars.  Thanks: Stefan Jakobs
 - Fix: Reason for deferral/bounce would sometimes be incorrectly
   shown as unknown recipient.
 - Fix: Better handle the trigger subject (SMTP_NAME_*) in discard,
   filter, hold, redirect, and warn actions (eg. Client host, Sender
   address, Recipient Address, Client certificate, etc.).
 - Change: reduce length of some extended status codes for readability.
 - Change: remove hard-coded "postgrey" from the syslog name pattern
   matching code, and instead add it to the configuration variable
   postfix_Syslog_Name.
 - Internal: converted all Section key names to lowercase to avoid
   silly case errors due to hash key case differences in Sections,
   Opts, and Collecting hashes.
 - Internal: debug output is now controlled by keywords.

2008-05-09 (version: 1.36.13)
   Final version skipped

2008-01-14 (version: 1.36.13pre7)
 - New: Support ETRN rejects (option: RejectEtrn).
 - Fix: Include optional text in L1 output for header/body checks Hold
   messages.
 - Fix: Accept "unknown" as an IP in Connection rate limit messages.
   Thanks: Stefan Jakobs
 - Fix: Improve MxError captures
 - Fix: Ignore "sql auxprop plugin ..." messages
 - Fix: Ignore more debug_peer_level=2 messages
 - Fix: Correct failure to ignore "connect to subsystem..." debug lines
 - Fix: Add missing RejectVerify to config file

2007-12-15 (version: 1.36.13pre6)
 - Fix: in BounceLocal and EnvelopeSenderDomains, set null domain
   and formatted host to '*unknown'.
 - Fix: Move postfix_warning before postfix_cleanup, as some cleanup
   warnings were caught as unmatched.
 - Fix: An Accepted message is now triggered by smtpd "client=..."
   and pickup "uid=..." log entries, instead of qmgr's "from=xxx,
   size=nnn, nrcpt=nnn" log lines.  A message may have been accepted
   during a previous time period, but delivery delays result in
   multiple qmgr delivery attempts, resulting in over counting
   Accepted messages.  Thanks: Stefan Jakobs
 - New: Bytes delivered is now broken down by Bytes sent via SMTP,
   LMTP, and forwarded, to be orthogonal with message counts.
 - Fix: Resent messages no longer reduce the number of messages
   accepted - this was a naive attempt at not counting, for example,
   messages released and re-queued from a content filter's quarantine.

2007-11-14 (version: 1.36.13pre5)
 - New: Threshold limiting and Top N lists for every level in each
   Detail section.  Every level in each section can now be limited
   with minimum count thresholds and top N lists.  See the updated
   README file, the comments in the postfix-logwatch.conf file, and
   the new postfix-logwatch man page.  Requested by: Pavel Urban
 - New: Rejects can now be categorized by reject reply code.  A new
   option/variable "reject_reply_patterns" is a list of reject reply
   code regular expressions, which are used for categorizing rejects.
   This feature allows, for example, distinguishing 421 transmission
   channel closes from 45x errors. (eg. 450 mailbox unavailable, 451
   local processing errors, 452 insufficient storage).  The default
   list is: "5.. 4.. Warn" which creates three groups of rejects:
   permanent rejects, temporary failures, and reject warnings (as in
   warn_if_reject).  Requested by: Noel Jones
 - New: postfix-logwatch man page created (net yet complete)
 - New: Support for all access(5) actions.  See the "Level Limiter
   Options" section in the postfix-logwatch(1) man page, and "Common
   access control actions" in postfix-logwatch.conf.
 - New: Added envelope senders and envelope sender domains reports.
   These are disabled by default.  Enable with level limiter options
   --envelopesenders 1 and --envelopesenderdomains 1 (or 2 to
   also see senders listed under domains).  See also the
   postfix-logwatch.conf file.  Suggested by: Brendan
 - Change: Uncomment all variables in the config file.  This should
   help ensure the variables in the config file stay in sync with
   those used in the source.
 - Change: Merged sections SenderDelayNotification, DSNDelivered, and
   DSNUndelivered into NotificationSent, with sub-sections indicating
   the type of notification.  This gives the total number of sent
   notifications in the Summary section, and the breakdown by type
   of notification in the Detailed section.
 - Change: Removed "msgs" prefix from several options: msgsdeferred,
   msgsdelivered, msgsforwarded, msgsresent, msgssent, and msgssentlmtp
   are now deferred, delivered, forwarded, resent, sent and sentlmtp.
   The old options are still usable.
 - Change: force --help output to 80 chars.
 - Change: Taint mode is now on by default in standalone mode.  It is
   disabled upon installation in logwatch mode, as logwatch fails with
   taint mode enabled.
 - Change: Set the primary key in tlsserverconnect/tlsclientconnect
   options to type/cipher to reduce excessive level 2 output.
 - Change: Reported values that cannot be determined or are unavailable
   are prefixed with an asterisk (Eg. *unknown, *unspecified).
 - Change: Warn section title 'Warn action logged' changed simply to
   "Warned", to be consistent with other access/header_ and body_checks.
   The option is --warned, but --warn is still acceptable.
 - Fix: Significantly reduce memory footprint when detail < 5.
 - Fix: Usage and --help now correctly show only detail section
   level limiter options that are available.  Previously, summary-
   only counts were also display as level limiter options.
 - Fix: "too many errors after DATA" and "timeout after DATA" may 
   include a byte count, as in "(348 bytes)".  Thanks: John Beaver
 - Fix: Ignore postgrey 'delayed ...' lines
 - Fix: Allow logwatch --debug option to pass into postfix-logwatch
 - Fix: configuration file reading code was not properly warning on
   non-existent files
 - Fix: "filter" actions were incremented on "redirect" actions
 - Fix: Give more room to percentiles in delays percentiles table.
   A 5 day delay is 432000.000 seconds, and the previous table width
   was not sufficient.
 - Fix: --show_sect_vars command line option inadvertently required an
   argument; the name has been shortened to --sect_vars/--nosect_vars
   and correctly no longer requires an argument.  The longer names
   --[no]show_sect_vars work as well.  Thanks: Noel Jones
 - Fix: Handle some unmatched connect to failures in section
   ConnectToFailure.  Cleanup and consolidate several similar messages;
   add additional detail at level 3.
 - Fix: Increment postsuper Hold messages by the number of messages
   placed on hold.
 - Fix: Add "non-ESMTP response ..." messages to SmtpConversationError.
   First level is now the general SMTP error description.
 - Internal: Converted source to be package-based to allow code sharing
   with amavis-logwatch.  The single-file executable is auto-generated
   from the packages.
 - Internal: internal gen_test_log function to create sample log data
   for testing. Reads '#TD' comments from within postfix-logwatch.

2007-10-16 (version: 1.36.13pre4)
 - Fix: Handle messages "SSL_connect error to example.com: 0" and
   "Cannot start TLS: handshake failure" by coercing into warnings
   Thanks: Rob Sterenborg

2007-10-15 (version: 1.36.13pre3)
 - Fix: Handle "postmaster" DSNs
 - Fix: Handle "discarding EHLO keywords:" (ignored)
 - Internal: create bounce subroutine to handle bounce messages

2007-10-05 (version: 1.36.13pre2)
 - New: Initial support for postgrey (http://postgrey.schweikert.ch/)
   Requested by: Sebastian Wolfgarten

2007-10-05 (version: 1.36.13pre1)
 - New: Support for policy-spf software postfix-policyd-spf-perl
   Requested by: Nicodemo P. and Rob Sterenborg

2007-10-05 (version: 1.36.12)
 - New: support postfix 2.5 log changes (20071004, 20071003)
 - Incompatible Change: Config variable/command line option name change:
    * WarningHeader changed to Warn
    * MsgsRedirected changed to Redirected
    * ConnectionLost split into ConnectionLost{Inbound,Outbound}
 - Incompatible Change: Distinguish inbound (smtpd) vs. outbound (smtp),
   which replaces ConnectionsLost with ConnectionsLostInbound and
   ConnectionsLostOutbound.  ConnectionsLostInbound includes number of
   bytes received if the connection was lost during DATA.  Encouraged by
   2.5 20071003 change in logging.
 - New: Support for all header_checks(5)/body_checks(5) actions.  See
   also postfix-logwatch.conf for "Common access control actions"
 - New: Option show_sect_vars shows names of section configuration
   variables/command line options in titles of detailed report sections.
   This allows easy correlation of corresponding configuration file
   variables/command line option for each section. [ Default: 0 ]
 - Fix: catch postsuper's pluralized form of Delete message"s".
 - New: handle "cannot load Certificate Authority data" as Misc. warning
 - Fix: Makefile: no -D option to install in FreeBSD.  Use -d instead
 - Change: ConnectionLostInbound now defaults to level 1 only
 - Internal: Numerous code cleanups, re-factoring and restructuring
 - Internal: Test data migrating to include the correct postfix service, as
   internal code moves towards using the service name as an initial log
   line match qualifier

2007-09-13 (version: 1.36.11)
 - Incompatible Change:  All TempRejectXXX and RejectWarnXXX options/config vars
   have been renamed for easier identification in the code, and consistency.
   Now, all Reject variants look like RejectXXXyyy, where XXX is the
   given reject name (Helo, RBL, etc), and yyy is the optional reject type
   of "Warn" (warn_if_reject) or "Temp" (4xx temporary rejects).
   For example, the previously named RejectRelay, RejectWarnRelay and
   TempRejectRelay are now named RejectRelay, RejectRelayWarn and RejectRelayTemp.
   See the usage information or the .conf file to see the list.
 - Fix: A %Counts accumulator must use the same number of keys consistently.
   This error caused some totals to be wildly incorrect, and the fatal perl error:
     "Can't use string ("XXX") as a HASH ref while "strict refs" in use ..."
   Fortunately, this error only occurred with a specific set of data, which
   seemed not too common.
 - Fix: remove Temp and Warn variants of RejectHeader and RejectBody - they 
   don't exist.
 - Fix: Add Temp variant of RejectMilter
 - New: Add ProcessLimit section for 2.5 stress messages
 - New: accommodate postfix patch which also logs HELO name in smtpd's
   "QID: client=..." log entries.
 - Thanks: Noel Jones

2007-09-09 (version: 1.36.10)
 - New: handle "reject: DATA from ... <DATA>: Data command rejected: ..."
 - New: ignore "fingerprint=20:..." lines
 - Thanks Farkas Levente

2007-09-01 (version: 1.36.9)
 - Fix: remove rooted path in md5 file
 - Fix: Makefile install-logwatch rule was missing a parenthesis
 - Fix: Makefile updates from Till Mass

2007-08-31 (version: 1.36.8)
 - Change: Include GPLv2 license
 - Change: Include version number in tarball file name
 - Internal: Move CVS log comments to Changes file

2007-08-31 (version: 1.36.7)
 - Fix: capture older postfix RCPT from RBL reject entries. Thanks
   Hugo van der Kooij 

2007-08-15 (version: 1.36.6)
 - Changed: for sorting purposes, lowercase localpart of rejected email addresses
 - Change: Output help and version info on STDOUT for easier pipelines to a pager
 - New: option --nodetail zeros out all detail levels, to more easily obtain
   only specified detailed reports (eg: --nodetail --rejecthelo 1) will
   only show a list of rejected HELOs in the details section.
 - New: option --nosummary disables the summary section
 - New: detailed section command line arguments can now be specified with the
   prefix "no", to set the level to 0 (eg. --nomsgssent is equivalent to
   --msgssent 0).
 - Internal: split printReports into printSummaryReport and printDetailReport
 - Internal: change variable Formats to the more obvious named Sections

2007-08-03 (version: 1.36.5)
 - Changed: rejected addresses collected by domain, then localpart
 - New: delay percentiles report.  Config vars: show_delays and
   delays_percentiles; command line --[no]delays
 - Fix: Yes/True and No/False config values weren't being read properly
   in standalone

2007-08-01 (version: 1.36.4)
 - New: option --config_file allows specifying a configuration file via
   command line. Options in configuration file act as though they were
   set on the command line in order, with earlier settings being over-
   ridden by most recent settings.  Multiple config_file options may
   be specified.
 - Change: Summary title includes syslog_name in standalone mode
 - Change: Remove some extraneous newlines

2007-07-24 (version: 1.36.3)
 - Refine anvil connection rate exceeded messages

2007-07-13 (version: 1.36.2)
 - Support FreeBSD (<facility.priority> precedes hostname in syslog)
 - Thanks Clemens Fischer

2007-07-10
 - Ignore "nss_ldap: reconnected to LDAP server ..."
 - Handle "discard: header/body: messages
 - Thanks Jay Chandler

2007-07-03
 - Corrected some minor typos

2007-06-08
 - Changed titles shown for sender notifications of (non-)delivery
   and delay
 - Corrected some incorrect config file variable names.  Thanks: Nicolas

2007-06-02
 - Do not strip <> when address is '<>' in Illegal address syntax

2007-06-01
 - Changed warning output for smtpd messages:
   "lost connection after CONNECT from unknown[unknown]".
   Previous warning erroneously attributed this to pre-queue content
   filter overloads, but the problem indicates a more general
   smtpd overload.

2007-05-31
 - Fix bug which caused config file to be required in standalone mode

2007-05-30
 - Support delay_reject=no (debian: 426726)
 - Ignore additional unmatched TLS debug messages
 - Initial support for redirect messages
 - Some corrected typos
 - Thanks Jusin Pryzby

2007-05-25
 - Experimental: syntax to limit Top N level 1 output lines.  Variables
   that control depth levels in detailed reports can be specified as
   m.n, where m is the maximum level to output, and n specifies the number
   of level 1 items output.   Eg: $postfix_MsgsSent=2.10, will output
   the top 10 level 1 items, with each item providing 2 levels of detail.
 - Protect interpolated recipient addresses in cleanhostreply with \Q \E
 e Add zero-width assertions and use strict IP RE in bycount sort subroutine 
   to match IP addresses more reliably

2007-05-09
 - Ignore a few more policydweigh child or cache entries
 - Escape metacharacters from being interpreted in recipient_delimiter
 - Never split mailer-daemon, double-bounce, or when recipient_delimiter
   is a "-" (dash) never split owner- or -request localparts

2007-05-08
 - Support for running in standalone mode (independent of logwatch)
 - Renamed script to "postfix-logwatch" to avoid confusion when running
   in standalone mode.  See the README.
 - Add relay=virtual to "local" class for local vs. remote bounces

2007-05-07
 - Handle and report postfix/policydweight lines (postfix_PolicydWeight)
 - Handle and report Host offered STARTTLS lines
 - Generalize "maildrop: Unable to create a dot-lock at <path>" messages
 - Corrected typo that prevented fatal errors from being output

2007-04-26
 - Consolidate similar MX errors
 - set IP address to 127.0.0.1 when from=local, and reporting both host/hostip
 - More cleanup (re-factor common code, replace most global variables with lexicals,
   lowercase non-global variable names, shorten variable names, etc.)
 - Capture postsuper hold messages

2007-04-25
 - Support postfix 2.5 TLS message changes (smtpd_tls_loglevel > 0)
 - Move 4xx temporary rejects into their own section (experimental feature)

2007-04-18
 - Allow for hold messages that do not contain a recipient (Thanks John Wilcock)

2007-03-26
 - Lowercase recipient addresses in several Reject sections

2007-03-22
 - Accept spf.pobox.com URLs in Reject recipient address

2007-03-21
 - Handle spf lines from older version of postfix-spf, and spf.pobox.com URLs

2007-03-20
 - Capture and report postfix-spf lines
 - New config variable postfix_PolicySPF

2007-03-13
 - Capture and report reject_unknown_reverse_client_hostname.
   Thanks Michael M.

2007-03-09
 - Capture and report as config warning: "looking for plugins" NSF error

2007-03-03
 - fix reject header|body RE to allow "local" as host/ip
 - really ignore lines that don't match SyslogName;
 - add inc_unmatched subroutine for easier debug of unmatched lines

2007-02-27
 - Capture and summarize postfix-script output (starts, stops, refresh, etc.)
 - Remove redundant chomps

2007-02-26
 - Fix problem in sort routine where IP addresses were being captured
   anywhere in an output line for comparison via pack 'C4' - only
   attempt IP comparison if an IP address is the start of an output line
   Thanks: Ian
 - Provide support for syslog_name in Postfix 2.4 via postfix.conf
   variable postfix_Syslog_Name
 - Classify PIX workarounds based on type (there are several)
 - Change summary output criteria to check for any non-zero Totals

2007-02-25
 - Do not interpolate log lines into printf; they may contain % chars

2007-02-17
 - Ensure no output occurs when nothing is captured

2007-02-15
 - Place recipients and senders in their own keys, instead of combined

2007-02-14
 - Fix countdown bug in Deliveries, as ncrpt does not account for always_bcc

2007-02-14
 - Make reject and warn_if_reject distinct sections
 - Track Qids to properly report messages and bytes sent / accepted
 - Also track messages deferred (each of which may have many deferrals)
 - Consider reject VRFY a reject and accumulate in reject totals
 - Move header/body reject code in with the rest of the reject code
 - Move 'MAIL from' reject code in with the rest of the reject code
 - Remove unused variable
 - Print row heading separator lines only when appropriate
 - Move printing of report headings into printReports
 - Change Sent header to Sent via SMTP (orthogonal to Sent via LMTP)

2007-02-09
 - Better processing of remote server "host...said" replies
 - Made maximum report width configurable in postfix.conf
 - All lines in report now obey max report width

2007-02-07
 - Changed all From -> To lines to To <- From.  From address is often bogus
   and To is more interesting to see.

2007-02-06
 - Added new configuration variable "postfix_Recipient_Delimiter", which
   can be set to match the postfix variable "recipient_delimiter".
   When set, allows Delivered and Sent reports to be grouped by
   email addresses minus their address extension.
 - Liberalized the RE for capturing VFRY rejects
 - Reverted change of primary SASL authenticated messages; primary
   key is once again User, followed by Method.  Unknown is reported
   when these keys are not available.
 - Created a SASL authenticated relayed messages which hits with
   sasl_sender is present in smtpd messages
 - Split orig_to email addresses into a subkey.  Allows reports
   to be grouped by primary "to" address, instead of various aliases.
 - Move Host/HostIP into their own keys for Bounce Remote section
 - For Pix Workaround section, format HostIP / Host the same as others
 - Add 'o' option where missing in REs
 - Fix configuration variable importing

2007-02-03
 - Added VFRY reject section
 - Changed primary key for SASL authentication section to IP/hostname,
   as any of sasl_{method,sender,user} may be absent
 - Added RFC 3463 DSN code messages to bounce/deferred sections
 - More parsing of various "host...said" remote server messages
 - Add Sent via LMTP section, removing lmtp-delivered mail out of Delivered.
   Allows users with lmtp-based content filters to avoid double counting
   (but only for message counts; byte counts are still about 50% too large).
   Config variable postfix_MsgsSentLmtp controls display

2007-01-28
 - Added pre-queue content-filter overload section
 - Reworked Bounce (local/remote) and Deferred sections
 - Fixed several reversed captures of Host and HostIP
 - Format Host and HostIP in Numeric hostname section
 - Thanks: Mike Horwath

2007-01-28
 - Made Reason the primary key in Deliverable/Undeliverable 'sendmail -bv' tests
 - Modified re_DSN RE to capture DSNs missing 3 number response code
 - Enhanced SASL authenticated messages to capture missing log lines
 - Added milter-reject section
 - Updated 'Reject server configuration error' RE for older postfix versions
 - Fix copy/paste error which caused use of incorrect variable in bad size limit 
 - Add Concurrency limit reached section
 - Add "maildrop" to the list of relay's considered local in Bounce section

2007-01-23
 - Aggregate recipient/sender address verification lines (Thanks Harald Geiger)
 - Uppercase message in reject recipient section

2007-01-22
 - Update REs to allow null sender in sender addresses

2007-01-19
 - Capture and summarize "triggers FILTER" messages (Thanks Eray Aslan)
 - Fix overly permissive Server configuration error RE (Thanks Harald Geiger)
 - Add "Server configuration error" rejects to Reject totals
 - Add "Insufficient system storage" rejects to Reject totals
 - Make RejectSize report consistent with others

2007-01-17
 - Update IP RE to support IPV6 (Thanks Harald Geiger)
 - Aggregate reject recipient address caused by SPF (Thanks Harald Geiger)

2007-01-16
 - Made Reject HELO/EHLO report consistent with others: demoted Helo=xxx
   string (Thanks: Jorey Bump)
 - Fixed incorrect TotalRejects summation (typo)
 - "Accepted" / "Rejected" summation is no longer based on "Connection";
   now Total = Accepted + Rejected
   * Client may or may not close connection properly after reject
   * Multiple rejects for single connection can occur
 - ConnectToFailure header incorrectly indicated connection was "inbound"
 - Included Makefile for ease of installation during this testing phase (Thanks: Jorey Bump)

2006-12-16
 - Add pcre map warnings
 - Reordered headings to produce more obvious correlation with percentage breakdowns
 - Second key sort is now the illegal address in illegal address in SMTP command
 - More optimization of log entry capturing
 - Added Sent category capturing outbound SMTP connections
   requires modified /usr/share/logwatch/default.conf/services/postfix.conf or
   /etc/logwatch/conf/services/postfix.con
 - Added ability to control max print depth on a per section basis
 - Renamed Received to Accepted (to indicate accepted for delivery, and better opposite of Reject)
   NOTE: Accepted shows less than that of pflogsumm's Received, which incorrectly
   increments rejected messages
 - Reduce Accepted by Deferred and Resent, which cause double counting
 - Removed erroneous a-z in RE for capturing QIDs
 - Added Panic section for postfix panic messages
 - Fixed bug which failed to increment watchdog timers
 - Started work on better debug capability 

2006-12-13
 - Removed extra blank line for Detail <= 5
 - Filter many more debug lines
 - Catch and group additional warning and fatal messages

2006-12-12
- Made reject header/body output consistent with each other
- Sort reject header/body first by recipient address, for tighter groupings - reject reason is typically random
- Trimmed excess whitespace in reject header/body reasons
- Added extra line between level 1 headings
- Group SASL authenticated messages by sasl_username
- Filter TLS and SASL debug messages (smtpd_tls_loglevel = 2)

Rewrite by Mike Cappella (MrC)
Revision 1.29  2007/01/27 20:21:46  mrc
  - Provide more useful information and summaries
  - Provide increasing detail as requested via --detail
  - Provide ability to configure per section maximum detail
  - Optimize and combine the numerous REs
  - Capture and summarize many more log lines
  - Pin important errors to top of report
  - Sort by hits, IP, and lexically
  - Handle IPv6 addresses
  - Generalize log line capturing and reporting
  - Eliminate excessive copy/paste reporting code
  - Requires updated postfix.conf file
  - Thanks: Eray Aslan, Jorey Bump, Harald Geiger, Bill Hudacek,
    Frederic Jacquet, Geert Janssens, Leon Kolchinsky, Rob Myroon

Revision 1.28  2006/12/15 06:24:49  bjorn
Filtering "sender non-delivery notification", by Ivana Varekova.

Revision 1.27  2006/12/15 05:00:41  bjorn
Filter all held message logs, by Hugo van der Kooij.

Revision 1.26  2006/10/20 16:51:50  bjorn
Additional matching of sasl messages, by Willi Mann.

Revision 1.25  2006/08/13 21:25:55  bjorn
Updates to work with the Postfix 2.3.x series (due to log format changes),
by Mike Cappella.

Revision 1.24  2006/03/22 17:43:46  bjorn
Changes by Harald Geiger:
- ignore additional statistics: messages (Postfix 2.2)
- replaced several 5xx Codes by [0-9]+
  (main reason is to make them match on 4xx if in soft_bounce=yes mode)
- a more generic "Client host rejected" reporting
- changed "Messages rejected:" to "Messages rejected from sender:"

Revision 1.23  2005/12/19 15:47:47  bjorn
Updates from Mike Cappella:
  - Catches some of the Unknown Users messages from newer versions of postfix
  - Consolidates a couple of REs
  - Adds a cumulative total to each of the Unknown users and Header content rejection headers
  - Adds a Body content rejection section

Revision 1.22  2005/11/22 18:30:47  bjorn
Detecting 'virtual alias table', by Kevin Old.

Revision 1.21  2005/08/23 23:54:38  mike
Fixed typo probably from Roland Hermans -mgt

Revision 1.20  2005/07/25 22:26:28  bjorn
Added "Sender address" to "554 Service unavailable" regexp, by Who Knows

Revision 1.19  2005/04/22 13:48:28  bjorn
This patch catches (un)deliverable messages and many more, which were
missing until now on mu new postfix-2.1.*, from Paweł Gołaszewski

Revision 1.18  2005/04/17 23:12:28  bjorn
Patches from Peter Bieringer and Willi Mann: ignoring more lines and
some blank spaces

Revision 1.17  2005/02/24 17:08:05  kirk
Applying consolidated patches from Mike Tremaine

Revision 1.7  2005/02/16 00:43:28  mgt
Added #vi tag to everything, updated ignore.conf with comments,
added emerge and netopia to the tree from Laurent -mgt

Revision 1.6  2005/02/13 23:50:42  mgt
Tons of patches from Pawel and PLD Linux folks...Thanks! -mgt

Revision 1.5  2004/10/06 21:42:53  mgt
patches from Pawel quien-sabe -mgt

Revision 1.4  2004/07/29 19:33:29  mgt
Chmod and removed perl call -mgt

Revision 1.3  2004/07/10 01:54:35  mgt
sync with kirk -mgt

Revision 1.13  2004/06/23 15:01:17  kirk
- Added more patches from blues@ds.pg.gda.pl

Revision 1.12  2004/06/21 14:59:05  kirk
Added tons of patches from Pawe? Go?aszewski" <blues@ds.pg.gda.pl>
Thanks, as always!

Revision 1.11  2004/06/21 13:42:02  kirk
From: Matthew Wise <matt@oatsystems.com>
This is more of a suggestion than a true patch submission. On a busy
postfix server the messages sent by section is really long and not
helpful. This patch finds and lists the top 10 senders by number of
messages.

Revision 1.10  2004/06/21 13:41:04  kirk
Patch from rod@nayfield.com

Revision 1.9.1 2004/02/22 16:44:01 rod
Added patch from rod@nayfield.com

Revision 1.9  2004/02/03 03:25:02  kirk
Added patch from quien-sabe@metaorg.com

Revision 1.8  2004/02/03 02:45:26  kirk
Tons of patches, and new 'oidentd' and 'shaperd' filters from
Pawe? Go?aszewski" <blues@ds.pg.gda.pl>

Revision 1.7  2003/12/15 18:35:03  kirk
Tons of patches from blues@ds.pg.gda.pl

Revision 1.6  2003/12/15 18:09:23  kirk
Added standard vi formatting commands at the bottom of all files.
Applied many patches from blues@ds.pg.gda.pl

Revision 1.5  2003/12/15 17:45:09  kirk
Added clamAV update log filter from lars@spinn.dk

Revision 1.4  2003/11/26 14:36:30  kirk
Applied patch from blues@ds.pg.gda.pl

Revision 1.3  2003/11/18 14:04:05  kirk
More patches from blues@ds.pg.gda.pl

Revision 1.2  2003/11/18 04:02:21  kirk
Patch from blues@ds.pg.gda.pl

Revision 1.1  2003/11/03 04:49:18  kirk
Added postfix filter from Sven Conrad <sconrad@receptec.net>

Revision 1.1  2002/03/29 15:32:14  kirk
Added some filters found in RH's release

Revision ???  2000/07/12 Simon Liddington <sjl@zepler.org>
converted from sendmail to postfix Sven Conrad <scon@gmx.net>
added unknown users, relay denials

Revision 1.1  2003/03/21 21:10  sven
Initial revision
filters all postfix/<process> messages