DB_NAME=census
DB_USER=postgres
TIGER_SRID=4269
+SHAPELY_URL=http://pypi.python.org/packages/source/S/Shapely/Shapely-1.0.14.tar.gz
-# URLs for the TIGER/Line block-level shapefiles.
+# Root folder for the shapefiles.
TIGER_ROOT=http://www2.census.gov/geo/tiger/TIGER2009
-MD_BLOCKS_URL=$(TIGER_ROOT)/24_MARYLAND/tl_2009_24_tabblock00.zip
-VA_BLOCKS_URL=$(TIGER_ROOT)/51_VIRGINIA/tl_2009_51_tabblock00.zip
-PA_BLOCKS_URL=$(TIGER_ROOT)/42_PENNSYLVANIA/tl_2009_42_tabblock00.zip
-NY_BLOCKS_URL=$(TIGER_ROOT)/36_NEW_YORK/tl_2009_36_tabblock00.zip
+
+# State-specific folders.
+DC_ROOT=$(TIGER_ROOT)/11_DISTRICT_OF_COLUMBIA
+MD_ROOT=$(TIGER_ROOT)/24_MARYLAND
+VA_ROOT=$(TIGER_ROOT)/51_VIRGINIA
+PA_ROOT=$(TIGER_ROOT)/42_PENNSYLVANIA
+NY_ROOT=$(TIGER_ROOT)/36_NEW_YORK
+
+# URLs for the TIGER/Line block-level shapefiles.
+DC_BLOCKS_URL=$(DC_ROOT)/tl_2009_11_tabblock00.zip
+MD_BLOCKS_URL=$(MD_ROOT)/tl_2009_24_tabblock00.zip
+VA_BLOCKS_URL=$(VA_ROOT)/tl_2009_51_tabblock00.zip
+PA_BLOCKS_URL=$(PA_ROOT)/tl_2009_42_tabblock00.zip
+NY_BLOCKS_URL=$(NY_ROOT)/tl_2009_36_tabblock00.zip
# Starting with PostGIS 1.4.0, these paths are calculated at install
# time using the pg_config utility. Rather than try to guess where
# Necessary to run test/data without prerequisites.
#
-.PHONY : test data
+.PHONY : test data lib
# The default task, since it comes first in the list.
#
-all: clean test
+all: clean lib test
test:
./bin/run_tests
+# Download or check out any third-party libraries.
+lib:
+ if [ ! -d lib/Shapely ]; then \
+ wget -O shapely.tar.gz $(SHAPELY_URL); \
+ tar -xvzf shapely.tar.gz -C lib/ ; \
+ rm shapely.tar.gz; \
+ mv lib/Shapely* lib/Shapely; \
+ fi;
+
+
# Remove byte-compiled python code.
#
clean:
# Download the shapefiles from Tiger if they don't already exist.
-# For now, we're only dealing with the Census 2000 Maryland Block
-# data, so the filenames are hard-coded. Easy enough to change.
-#
-data: tiger_blocks
+data: tiger_blocks tiger_lines
+
+tiger_blocks: dc_blocks md_blocks va_blocks pa_blocks ny_blocks
-tiger_blocks: md_blocks va_blocks pa_blocks ny_blocks
+dc_blocks:
+ mkdir -p data/census2000/district_of_columbia/block
+ if [ ! -f data/census2000/district_of_columbia/block/tl_2009_11_tabblock00.shp ]; \
+ then \
+ wget -O dcblocks.zip $(DC_BLOCKS_URL); \
+ unzip dcblocks.zip -d ./data/census2000/district_of_columbia/block; \
+ rm dcblocks.zip; \
+ fi;
md_blocks:
mkdir -p data/census2000/maryland/block
fi;
-# This task does a couple of things. First, it drops and re-creates
-# the DB_NAME database (or schema, whatever). Then, it adds PL/pgSQL
-# support to the database.
+tiger_lines:
+ bin/download_data
+
+
+# This imports the Tiger data using shp2pgsql. The shapefiles
+# should exist, since this task depends on the "data" task, which
+# downloads said shapefiles.
+#
+# After the TIGER import is done, we use the sf1blocks2sql script to
+# parse and import the geographic header record information.
+#
+db: data newdb tiger_blocks_table tiger_lines_table sf1_blocks_table
+# All Blocks
+#
+# The table already exists, so we can append to it, and we don't have
+# to create the GiST index.
+ for state in data/census2000/*; do \
+ $(PG_BINDIR)/shp2pgsql \
+ -a \
+ -s $(TIGER_SRID) \
+ -D \
+ $$state/block/*.shp \
+ tiger_blocks \
+ | psql -U $(DB_USER) -d $(DB_NAME); \
+ done;
+
+# All Lines
+#
+# Since the table and index already exist, we can utilize -a,
+# and leave -I out.
+ for state in data/census2000/*; do \
+ for shapefile in $$state/lines/*.shp; do \
+ echo "Importing $$shapefile."; \
+ $(PG_BINDIR)/shp2pgsql \
+ -a \
+ -s $(TIGER_SRID) \
+ $$shapefile \
+ tiger_lines \
+ | bin/filter-transactions \
+ | psql -U $(DB_USER) -d $(DB_NAME) \
+ > /dev/null; \
+ done; \
+ done;
+
+ bin/sf1blocks2sql src/Tests/Fixtures/SummaryFile1/mdgeo.uf1 sf1_blocks \
+ | psql -U postgres -d $(DB_NAME) \
+ > /dev/null
+
+
+
+# First, we drop and re-create the DB_NAME database (or schema,
+# whatever). Then, we add PL/pgSQL support to the database.
#
# At that point, we import the two PostGIS files, postgis.sql and
# spatial_ref_sys.sql. The postgis.sql file contains the geometry
# functions, while spatial_ref_sys.sql contains a table of SRIDs, and
# their associated properties. PostGIS requires both.
#
-# Then, we import the Tiger data using shp2pgsql. The shapefiles
-# should exist, since this task depends on the "data" task, which
-# downloads said shapefiles.
-#
-# Finally, we create the table for the demographic data (obtained from
-# the geographic header records), and populate that table with the output
-# of the sf1blocks2sql script.
-#
-db: data
- # Ignore the result of dropdb when it fails.
+newdb:
+# Ignore the result of dropdb when it fails.
dropdb -U $(DB_USER) $(DB_NAME) || true
createdb -U $(DB_USER) $(DB_NAME)
createlang -U $(DB_USER) plpgsql $(DB_NAME)
- psql -d $(DB_NAME) \
- -U $(DB_USER) \
- -f $(PG_SHAREDIR)/contrib/postgis.sql
-
- psql -d $(DB_NAME) \
- -U $(DB_USER) \
- -f $(PG_SHAREDIR)/contrib/spatial_ref_sys.sql
-
-
-# Maryland Blocks
-
- $(PG_BINDIR)/shp2pgsql \
- -I \
- -s $(TIGER_SRID) \
- -D \
- data/census2000/maryland/block/tl_2009_24_tabblock00.shp \
- tiger_blocks \
- | psql -U $(DB_USER) -d $(DB_NAME)
-
-
-# Virginia Blocks
-
- $(PG_BINDIR)/shp2pgsql -a \
- -I \
- -s $(TIGER_SRID) \
- -D \
- data/census2000/virginia/block/tl_2009_51_tabblock00.shp \
- tiger_blocks \
- | psql -U $(DB_USER) -d $(DB_NAME)
-
-
-# Pennsylvania Blocks
-
- $(PG_BINDIR)/shp2pgsql -a \
- -I \
- -s $(TIGER_SRID) \
- -D \
- data/census2000/pennsylvania/block/tl_2009_42_tabblock00.shp \
- tiger_blocks \
- | psql -U $(DB_USER) -d $(DB_NAME)
-
-
-# New York Blocks
-
- $(PG_BINDIR)/shp2pgsql -a \
- -I \
- -s $(TIGER_SRID) \
- -D \
- data/census2000/new_york/block/tl_2009_36_tabblock00.shp \
- tiger_blocks \
- | psql -U $(DB_USER) -d $(DB_NAME)
-
-
- psql -d $(DB_NAME) \
- -U $(DB_USER) \
- -f sql/create-sf1_blocks-table.sql
-
- bin/sf1blocks2sql src/Tests/Fixtures/SummaryFile1/mdgeo.uf1 sf1_blocks \
- | psql -U postgres -d $(DB_NAME) > /dev/null
-
+ psql -d $(DB_NAME) \
+ -U $(DB_USER) \
+ -f $(PG_SHAREDIR)/contrib/postgis.sql \
+ > /dev/null
+
+ psql -d $(DB_NAME) \
+ -U $(DB_USER) \
+ -f $(PG_SHAREDIR)/contrib/spatial_ref_sys.sql \
+ > /dev/null
+
+
+# This just runs the SQL script to create the sf1_blocks table.
+sf1_blocks_table:
+ psql -d $(DB_NAME) \
+ -U $(DB_USER) \
+ -f sql/create-sf1_blocks-table.sql \
+ > /dev/null
+
+
+# Create the tiger_blocks table, and create its GiST index. Having the
+# table already exist makes importing via shp2pgsql much easier.
+# Any blocks file will work as an argument.
+tiger_blocks_table:
+ $(PG_BINDIR)/shp2pgsql \
+ -p \
+ -I \
+ -s $(TIGER_SRID) \
+ data/census2000/maryland/block/tl_2009_24_tabblock00.shp \
+ tiger_blocks \
+ | psql -U postgres -d $(DB_NAME) \
+ > /dev/null
+
+
+# Prepare the tiger_lines table, and create the GiST index on its
+# geometry column. Any lines shapefile will do here.
+tiger_lines_table:
+ $(PG_BINDIR)/shp2pgsql \
+ -p \
+ -I \
+ -s $(TIGER_SRID) \
+ data/census2000/maryland/lines/tl_2009_24510_edges.shp \
+ tiger_lines \
+ | psql -U postgres -d $(DB_NAME) \
+ > /dev/null
+
+# Add a unique index on the "tlid" column.
+ psql -U postgres \
+ -d census \
+ -f sql/create_tlid_unique_index.sql
projects / dead / census-tools.git / blobdiff