amavis-logwatch

   1 #!/usr/bin/perl -T
   2
   3 ##########################################################################
   4 # Amavis-logwatch: written and maintained by:
   5 #
   6 #    Mike "MrC" Cappella <mike (at) cappella (dot) us>
   7 #      http://logreporters.sourceforge.net/
   8 #
   9 # Please send all comments, suggestions, bug reports regarding this
  10 # program/module to the email address above.  I will respond as quickly
  11 # as possible. [MrC]
  12 #
  13 # Questions regarding the logwatch program itself should be directed to
  14 # the logwatch project at:
  15 #   http://sourceforge.net/projects/logwatch/support
  16 #
  17 #######################################################
  18 ### All work since Dec 12, 2006 (logwatch CVS revision 1.28)
  19 ### Copyright (c) 2006-2012  Mike Cappella
  20 ###
  21 ### Covered under the included MIT/X-Consortium License:
  22 ###    http://www.opensource.org/licenses/mit-license.php
  23 ### All modifications and contributions by other persons to
  24 ### this script are assumed to have been donated to the
  25 ### Logwatch project and thus assume the above copyright
  26 ### and licensing terms.  If you want to make contributions
  27 ### under your own copyright or a different license this
  28 ### must be explicitly stated in the contribution an the
  29 ### Logwatch project reserves the right to not accept such
  30 ### contributions.  If you have made significant
  31 ### contributions to this script and want to claim
  32 ### copyright please contact logwatch-devel@lists.sourceforge.net.
  33 ##########################################################
  34
  35 ##########################################################################
  36 # The original amavis logwatch filter was written by
  37 # Jim O'Halloran <jim @ kendle.com.au>, and has had many contributors over
  38 # the years.
  39 #
  40 # CVS log removed: see Changes file for amavis-logwatch at
  41 #    http://logreporters.sourceforge.net/
  42 # or included with the standalone amavis-logwatch distribution
  43 ##########################################################################
  44
  45 package Logreporters;
  46 use 5.008;
  47 use strict;
  48 use warnings;
  49 no warnings "uninitialized";
  50 use re 'taint';
  51
  52 our $Version         = '1.51.03';
  53 our $progname_prefix = 'amavis';
  54
  55 # Specifies the default configuration file for use in standalone mode.
  56 my $config_file = "/usr/local/etc/${progname_prefix}-logwatch.conf";
  57
  58 #MODULE: ../Logreporters/Utils.pm
  59 package Logreporters::Utils;
  60
  61 use 5.008;
  62 use strict;
  63 use re 'taint';
  64 use warnings;
  65
  66 BEGIN {
  67    use Exporter ();
  68    use vars qw(@ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $VERSION);
  69    $VERSION = '1.003';
  70    @ISA = qw(Exporter);
  71    @EXPORT = qw(&formathost &get_percentiles &get_percentiles2 &get_frequencies &commify &unitize
  72                 &get_usable_sectvars &add_section &begin_section_group &end_section_group
  73                 &get_version &unique_list);
  74    @EXPORT_OK = qw(&gen_test_log);
  75 }
  76
  77 use subs qw (@EXPORT @EXPORT_OK);
  78
  79
  80 # Formats IP and hostname for even column spacing
  81 #
  82 sub formathost($ $) {
  83    # $_[0] : hostip
  84    # $_[1] : hostname;
  85
  86    if (! $Logreporters::Config::Opts{'unknown'} and $_[1] eq 'unknown') {
  87       return $_[0];
  88    }
  89
  90    return sprintf "%-$Logreporters::Config::Opts{'ipaddr_width'}s  %s",
  91       $_[0] eq '' ? '*unknown' :    $_[0],
  92       $_[1] eq '' ? '*unknown' : lc $_[1];
  93 }
  94
  95 # Add a new section to the end of a section table
  96 #
  97 sub add_section($$$$$;$) {
  98    my $sref = shift;
  99    die "Improperly specified Section entry: $_[0]" if !defined $_[3];
 100
 101    my $entry  = {
 102       CLASS     => 'DATA',
 103       NAME      => $_[0],
 104       DETAIL    => $_[1],
 105       FMT       => $_[2],
 106       TITLE     => $_[3],
 107    };
 108    $entry->{'DIVISOR'}   = $_[4] if defined $_[4];
 109    push @$sref, $entry;
 110 }
 111
 112 {
 113 my $group_level = 0;
 114
 115 # Begin a new section group.  Groups can nest.
 116 #
 117 sub begin_section_group($;@) {
 118    my $sref = shift;
 119    my $group_name = shift;
 120    my $entry  = {
 121       CLASS     => 'GROUP_BEGIN',
 122       NAME      => $group_name,
 123       LEVEL     => ++$group_level,
 124       HEADERS   => [ @_ ],
 125    };
 126    push @$sref, $entry;
 127 }
 128
 129 # Ends a section group.
 130 #
 131 sub end_section_group($;@) {
 132    my $sref = shift;
 133    my $group_name = shift;
 134    my $entry  = {
 135       CLASS     => 'GROUP_END',
 136       NAME      => $group_name,
 137       LEVEL     => --$group_level,
 138       FOOTERS   => [ @_ ],
 139    };
 140    push @$sref, $entry;
 141 }
 142 }
 143
 144 # Generate and return a list of section table entries or
 145 # limiter key names, skipping any formatting entries.
 146 # If 'namesonly' is set, limiter key names are returned,
 147 # otherwise an array of section array records is returned.
 148 sub get_usable_sectvars(\@ $) {
 149    my ($sectref,$namesonly) = @_;
 150    my (@sect_list, %unique_names);
 151
 152    foreach my $sref (@$sectref) {
 153       #print "get_usable_sectvars: $sref->{NAME}\n";
 154       next unless $sref->{CLASS} eq 'DATA';
 155       if ($namesonly) {
 156          $unique_names{$sref->{NAME}} = 1;
 157       }
 158       else {
 159          push @sect_list, $sref;
 160       }
 161    }
 162    # return list of unique names
 163    if ($namesonly) {
 164       return keys %unique_names;
 165    }
 166    return @sect_list;
 167 }
 168
 169 # Print program and version info, preceeded by an optional string, and exit.
 170 #
 171 sub get_version() {
 172
 173    print STDOUT "@_\n"  if ($_[0]);
 174    print STDOUT "$Logreporters::progname: $Logreporters::Version\n";
 175    exit 0;
 176 }
 177
 178
 179 # Returns a list of percentile values given a
 180 # sorted array of numeric values.  Uses the formula:
 181 #
 182 # r = 1 + (p(n-1)/100) = i + d  (Excel method)
 183 #
 184 # r = rank
 185 # p = desired percentile
 186 # n = number of items
 187 # i = integer part
 188 # d = decimal part
 189 #
 190 # Arg1 is an array ref to the sorted series
 191 # Arg2 is a list of percentiles to use
 192
 193 sub get_percentiles(\@ @) {
 194    my ($aref,@plist) = @_;
 195    my ($n, $last, $r, $d, $i, @vals, $Yp);
 196
 197    $last = $#$aref;
 198    $n = $last + 1;
 199    #printf "%6d" x $n . "\n", @{$aref};
 200
 201    #printf "n: %4d, last: %d\n", $n, $last;
 202    foreach my $p (@plist) {
 203       $r = 1 + ($p * ($n - 1) / 100.0);
 204       $i = int ($r);            # integer part
 205       # domain: $i = 1 .. n
 206       if ($i == $n) {
 207         $Yp = $aref->[$last];
 208       }
 209       elsif ($i == 0) {
 210         $Yp = $aref->[0];
 211         print "CAN'T HAPPEN: $Yp\n";
 212       }
 213       else {
 214          $d = $r - $i;          # decimal part
 215          #p = Y[i] + d(Y[i+1] - Y[i]), but since we're 0 based, use i=i-1
 216          $Yp = $aref->[$i-1] + ($d * ($aref->[$i] - $aref->[$i-1]));
 217       }
 218       #printf "\np(%6.2f), r: %6.2f, i: %6d, d: %6.2f, Yp: %6d", $p, $r, $i, $d, $Yp;
 219       push @vals, $Yp;
 220    }
 221
 222    return @vals;
 223 }
 224
 225 sub get_num_scores($) {
 226    my $scoretab_r = shift;
 227
 228    my $totalscores = 0;
 229
 230    for (my $i = 0; $i < @$scoretab_r; $i += 2) {
 231       $totalscores += $scoretab_r->[$i+1]
 232    }
 233
 234    return $totalscores;
 235 }
 236
 237 # scoretab
 238 #
 239 #  (score1, n1), (score2, n2), ... (scoreN, nN)
 240 #     $i   $i+1
 241 #
 242 # scores are 0 based (0 = 1st score)
 243 sub get_nth_score($ $) {
 244    my ($scoretab_r, $n) = @_;
 245
 246    my $i = 0;
 247    my $n_cur_scores = 0;
 248    #print "Byscore (", .5 * @$scoretab_r, "): "; for (my $i = 0; $i < $#$scoretab_r / 2; $i++) { printf "%9s (%d) ", $scoretab_r->[$i], $scoretab_r->[$i+1]; } ; print "\n";
 249
 250    while ($i < $#$scoretab_r) {
 251       #print "Samples_seen: $n_cur_scores\n";
 252       $n_cur_scores += $scoretab_r->[$i+1];
 253       if ($n_cur_scores >= $n) {
 254          #printf "range: %s  %s  %s\n", $i >= 2 ? $scoretab_r->[$i - 2] : '<begin>', $scoretab_r->[$i], $i+2 > $#$scoretab_r ? '<end>' : $scoretab_r->[$i + 2];
 255          #printf "n: $n, i: %8d, n_cur_scores: %8d, score: %d x %d hits\n", $i, $n_cur_scores, $scoretab_r->[$i], $scoretab_r->[$i+1];
 256          return $scoretab_r->[$i];
 257       }
 258
 259       $i += 2;
 260    }
 261    print "returning last score $scoretab_r->[$i]\n";
 262    return $scoretab_r->[$i];
 263 }
 264
 265 sub get_percentiles2(\@ @) {
 266    my ($scoretab_r, @plist) = @_;
 267    my ($n, $last, $r, $d, $i, @vals, $Yp);
 268
 269    #$last = $#$scoretab_r - 1;
 270    $n = get_num_scores($scoretab_r);
 271    #printf "\n%6d" x $n . "\n", @{$scoretab_r};
 272
 273    #printf "\n\tn: %4d, @$scoretab_r\n", $n;
 274    foreach my $p (@plist) {
 275   ###print "\nPERCENTILE: $p\n";
 276       $r = 1 + ($p * ($n - 1) / 100.0);
 277       $i = int ($r);            # integer part
 278       if ($i == $n) {
 279         #print "last:\n";
 280         #$Yp = $scoretab_r->[$last];
 281         $Yp = get_nth_score($scoretab_r, $n);
 282       }
 283       elsif ($i == 0) {
 284         #$Yp = $scoretab_r->[0];
 285         print "1st: CAN'T HAPPEN\n";
 286         $Yp = get_nth_score($scoretab_r, 1);
 287       }
 288       else {
 289          $d = $r - $i;          # decimal part
 290          #p = Y[i] + d(Y[i+1] - Y[i]), but since we're 0 based, use i=i-1
 291          my $ithvalprev = get_nth_score($scoretab_r, $i);
 292          my $ithval     = get_nth_score($scoretab_r, $i+1);
 293          $Yp = $ithvalprev + ($d * ($ithval - $ithvalprev));
 294       }
 295       #printf "p(%6.2f), r: %6.2f, i: %6d, d: %6.2f, Yp: %6d\n", $p, $r, $i, $d, $Yp;
 296       push @vals, $Yp;
 297    }
 298
 299    return @vals;
 300 }
 301
 302
 303
 304 # Returns a list of frequency distributions given an incrementally sorted
 305 # set of sorted scores, and an incrementally sorted list of buckets
 306 #
 307 # Arg1 is an array ref to the sorted series
 308 # Arg2 is a list of frequency buckets to use
 309 sub get_frequencies(\@ @) {
 310    my ($aref,@blist) = @_;
 311
 312    my @vals = ( 0 ) x (@blist);
 313    my @sorted_blist = sort { $a <=> $b } @blist;
 314    my $bucket_index = 0;
 315
 316 OUTER: foreach my $score (@$aref) {
 317       #print "Score: $score\n";
 318       for my $i ($bucket_index .. @sorted_blist - 1) {
 319          #print "\tTrying Bucket[$i]: $sorted_blist[$i]\n";
 320          if ($score > $sorted_blist[$i]) {
 321             $bucket_index++;
 322          }
 323          else {
 324             #printf "\t\tinto Bucket[%d]\n", $bucket_index;
 325             $vals[$bucket_index]++;
 326             next OUTER;
 327          }
 328       }
 329       #printf "\t\tinto Bucket[%d]\n", $bucket_index - 1;
 330       $vals[$bucket_index - 1]++;
 331    }
 332
 333    return @vals;
 334 }
 335
 336 # Inserts commas in numbers for easier readability
 337 #
 338 sub commify ($) {
 339     return undef if ! defined ($_[0]);
 340
 341     my $text = reverse $_[0];
 342     $text =~ s/(\d\d\d)(?=\d)(?!\d*\.)/$1,/g;
 343     return scalar reverse $text;
 344 }
 345
 346 # Unitize a number, and return appropriate printf formatting string
 347 #
 348 sub unitize($ $) {
 349    my ($num, $fmt) = @_;
 350    my $kilobyte = 2**10;
 351    my $megabyte = 2**20;
 352    my $gigabyte = 2**30;
 353    my $terabyte = 2**40;
 354
 355    if ($num >= $terabyte) {
 356       $num /= $terabyte;
 357       $fmt .= '.3fT';
 358    } elsif ($num >= $gigabyte) {
 359       $num /= $gigabyte;
 360       $fmt .= '.3fG';
 361    } elsif ($num >= $megabyte) {
 362       $num /= $megabyte;
 363       $fmt .= '.3fM';
 364    } elsif ($num >= $kilobyte) {
 365       $num /= $kilobyte;
 366       $fmt .= '.3fK';
 367    } else {
 368       $fmt .= 'd ';
 369    }
 370
 371    return ($num, $fmt);
 372 }
 373
 374 # Returns a sublist of the supplied list of elements in an unchanged order,
 375 # where only the first occurrence of each defined element is retained
 376 # and duplicates removed
 377 #
 378 # Borrowed from amavis 2.6.2
 379 #
 380 sub unique_list(@) {
 381    my ($r) = @_ == 1 && ref($_[0]) ? $_[0] : \@_;  # accept list, or a list ref
 382    my (%seen);
 383    my (@unique) = grep { defined($_) && !$seen{$_}++ } @$r;
 384
 385    return @unique;
 386 }
 387
 388 # Generate a test maillog file from the '#TD' test data lines
 389 # The test data file is placed in /var/tmp/maillog.autogen
 390 #
 391 # arg1: "postfix" or "amavis"
 392 # arg2: path to postfix-logwatch or amavis-logwatch from which to read '#TD' data
 393 #
 394 # Postfix TD syntax:
 395 #    TD<service><QID>(<count>) log entry
 396 #
 397 sub gen_test_log($) {
 398    my $scriptpath = shift;
 399
 400    my $toolname = $Logreporters::progname_prefix;
 401    my $datafile = "/var/tmp/maillog-${toolname}.autogen";
 402
 403    die "gen_test_log: invalid toolname $toolname"  if ($toolname !~ /^(postfix|amavis)$/);
 404
 405    eval {
 406       require Sys::Hostname;
 407       require Fcntl;
 408    } or die "Unable to create test data file: required module(s) not found\n$@";
 409
 410    my $syslogtime = localtime;
 411    $syslogtime =~ s/^....(.*) \d{4}$/$1/;
 412
 413    my ($hostname) = split /\./, Sys::Hostname::hostname();
 414
 415   # # avoid -T issues
 416   # delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
 417
 418    my $flags = &Fcntl::O_CREAT|&Fcntl::O_WRONLY|&Fcntl::O_TRUNC;
 419    sysopen(FH, $datafile, $flags) or die "Can't create test data file: $!";
 420    print "Generating test log data file from $scriptpath: $datafile\n";
 421
 422    my $id;
 423    @ARGV = ($scriptpath);
 424    if ($toolname eq 'postfix') {
 425       my %services = (
 426           DEF   => 'smtpd',
 427           bQ    => 'bounce',
 428           cN    => 'cleanup',
 429           cQ    => 'cleanup',
 430           lQ    => 'local',
 431           m     => 'master',
 432           p     => 'pickup',
 433           pQ    => 'pickup',
 434           ppQ   => 'pipe',
 435           pfw   => 'postfwd',
 436           pg    => 'postgrey',
 437           pgQ   => 'postgrey',
 438           ps    => 'postsuper',
 439           qQ    => 'qmgr',
 440           s     => 'smtp',
 441           sQ    => 'smtp',
 442           sd    => 'smtpd',
 443           sdN   => 'smtpd',
 444           sdQ   => 'smtpd',
 445           spf   => 'policy-spf',
 446           vN    => 'virtual',
 447           vQ    => 'virtual',
 448       );
 449       $id = 'postfix/smtp[12345]';
 450
 451       while (<>) {
 452          if (/^\s*#TD([a-zA-Z]*[NQ]?)(\d+)?(?:\(([^)]+)\))? (.*)$/) {
 453             my ($service,$count,$qid,$line) = ($1, $2, $3, $4);
 454
 455             #print "SERVICE: %s, QID: %s, COUNT: %s, line: %s\n", $service, $qid, $count, $line;
 456
 457             if ($service eq '') {
 458                $service = 'DEF';
 459             }
 460             die ("No such service: \"$service\": line \"$_\"")  if (!exists $services{$service});
 461
 462             $id = $services{$service} . '[123]';
 463             $id = 'postfix/' . $id    unless $services{$service} eq 'postgrey';
 464             #print "searching for service: \"$service\"\n\tFound $id\n";
 465             if    ($service =~ /N$/) { $id .= ': NOQUEUE'; }
 466             elsif ($service =~ /Q$/) { $id .= $qid ? $qid : ': DEADBEEF'; }
 467
 468             $line =~ s/ +/ /g;
 469             $line =~ s/^ //g;
 470             #print "$syslogtime $hostname $id: \"$line\"\n" x ($count ? $count : 1);
 471             print FH "$syslogtime $hostname $id: $line\n" x ($count ? $count : 1);
 472          }
 473       }
 474    }
 475    else { #amavis
 476       my %services = (
 477           DEF   => 'amavis',
 478           dcc   => 'dccproc',
 479       );
 480       while (<>) {
 481          if (/^\s*#TD([a-z]*)(\d+)? (.*)$/) {
 482             my ($service,$count,$line) = ($1, $2, $3);
 483             if ($service eq '') {
 484                $service = 'DEF';
 485             }
 486             die ("No such service: \"$service\": line \"$_\"")  if (!exists $services{$service});
 487             $id = $services{$service} . '[123]:';
 488             if ($services{$service} eq 'amavis') {
 489                $id .= ' (9999-99)';
 490             }
 491             print FH "$syslogtime $hostname $id $line\n" x ($count ? $count : 1)
 492          }
 493       }
 494    }
 495
 496    close FH or die "Can't close $datafile: $!";
 497 }
 498
 499 1;
 500
 501 #MODULE: ../Logreporters/Config.pm
 502 package Logreporters::Config;
 503
 504 use 5.008;
 505 use strict;
 506 use re 'taint';
 507 use warnings;
 508
 509
 510 BEGIN {
 511    use Exporter ();
 512    use vars qw(@ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $VERSION);
 513    $VERSION = '1.002';
 514    @ISA = qw(Exporter);
 515    @EXPORT = qw(&init_run_mode &add_option &get_options &init_cmdline &get_vars_from_file
 516                 &process_limiters &process_debug_opts &init_getopts_table_common &zero_opts
 517                 @Optspec %Opts %Configvars @Limiters %line_styles $fw1 $fw2 $sep1 $sep2
 518                 &D_CONFIG &D_ARGS &D_VARS &D_TREE &D_SECT &D_UNMATCHED &D_TEST &D_ALL
 519              );
 520 }
 521
 522 use subs @EXPORT;
 523
 524 our  @Optspec = ();      # options table used by Getopts
 525
 526 our %Opts = ();         # program-wide options
 527 our %Configvars = ();   # configuration file variables
 528 our @Limiters;
 529
 530 # Report separator characters and widths
 531 our ($fw1,$fw2)   = (22, 10);
 532 our ($sep1,$sep2) = ('=', '-');
 533
 534 use Getopt::Long;
 535
 536
 537 BEGIN {
 538    import Logreporters::Utils qw(&get_usable_sectvars);
 539 }
 540
 541 our %line_styles = (
 542    truncate => 0,
 543    wrap     => 1,
 544    full     => 2,
 545 );
 546
 547 sub init_run_mode($);
 548 sub confighash_to_cmdline(\%);
 549 sub get_vars_from_file(\% $);
 550 sub process_limiters(\@);
 551 sub add_option(@);
 552 sub get_options($);
 553 sub init_getopts_table_common(@);
 554 sub set_supplemental_reports($$);
 555 # debug constants
 556 sub D_CONFIG ()    { 1<<0 }
 557 sub D_ARGS ()      { 1<<1 }
 558 sub D_VARS ()      { 1<<2 }
 559 sub D_TREE ()      { 1<<3 }
 560 sub D_SECT ()      { 1<<4 }
 561 sub D_UNMATCHED () { 1<<5 }
 562
 563 sub D_TEST ()      { 1<<30 }
 564 sub D_ALL ()       { 1<<31 }
 565
 566 my %debug_words = (
 567    config     => D_CONFIG,
 568    args       => D_ARGS,
 569    vars       => D_VARS,
 570    tree       => D_TREE,
 571    sect       => D_SECT,
 572    unmatched  => D_UNMATCHED,
 573
 574    test       => D_TEST,
 575    all        => 0xffffffff,
 576 );
 577
 578 # Clears %Opts hash and initializes basic running mode options in
 579 # %Opts hash by setting keys: 'standalone', 'detail', and 'debug'.
 580 # Call early.
 581 #
 582 sub init_run_mode($) {
 583    my $config_file = shift;
 584    $Opts{'debug'} = 0;
 585
 586    # Logwatch passes a filter's options via environment variables.
 587    # When running standalone (w/out logwatch), use command line options
 588    $Opts{'standalone'} = exists ($ENV{LOGWATCH_DETAIL_LEVEL}) ? 0 : 1;
 589
 590    # Show summary section by default
 591    $Opts{'summary'} = 1;
 592
 593    if ($Opts{'standalone'}) {
 594       process_debug_opts($ENV{'LOGREPORTERS_DEBUG'}) if exists ($ENV{'LOGREPORTERS_DEBUG'});
 595    }
 596    else {
 597       $Opts{'detail'} = $ENV{'LOGWATCH_DETAIL_LEVEL'};
 598       # XXX
 599       #process_debug_opts($ENV{'LOGWATCH_DEBUG'}) if exists ($ENV{'LOGWATCH_DEBUG'});
 600    }
 601
 602    # first process --debug, --help, and --version options
 603    add_option ('debug=s',                   sub { process_debug_opts($_[1]); 1});
 604    add_option ('version',                   sub { &Logreporters::Utils::get_version(); 1;});
 605    get_options(1);
 606
 607    # now process --config_file, so that all config file vars are read first
 608    add_option ('config_file|f=s',           sub { get_vars_from_file(%Configvars, $_[1]); 1;});
 609    get_options(1);
 610
 611    # if no config file vars were read
 612    if ($Opts{'standalone'} and ! keys(%Configvars) and -f $config_file) {
 613       print "Using default config file: $config_file\n" if $Opts{'debug'} & D_CONFIG;
 614       get_vars_from_file(%Configvars, $config_file);
 615    }
 616 }
 617
 618 sub get_options($) {
 619    my $pass_through = shift;
 620    #$SIG{__WARN__} = sub { print "*** $_[0]*** options error\n" };
 621    # ensure we're called after %Opts is initialized
 622    die "get_options: program error: %Opts is emtpy" unless exists $Opts{'debug'};
 623
 624    my $p = new Getopt::Long::Parser;
 625
 626    if ($pass_through) {
 627       $p->configure(qw(pass_through permute));
 628    }
 629    else {
 630       $p->configure(qw(no_pass_through no_permute));
 631    }
 632    #$p->configure(qw(debug));
 633
 634    if ($Opts{'debug'} & D_ARGS) {
 635       print "\nget_options($pass_through): enter\n";
 636       printf "\tARGV(%d): ", scalar @ARGV;
 637       print @ARGV, "\n";
 638       print "\t$_ ", defined $Opts{$_} ? "=> $Opts{$_}\n" : "\n"  foreach sort keys %Opts;
 639    }
 640
 641    if ($p->getoptions(\%Opts, @Optspec) == 0) {
 642       print STDERR "Use ${Logreporters::progname} --help for options\n";
 643       exit 1;
 644    }
 645    if ($Opts{'debug'} & D_ARGS) {
 646       print "\t$_ ", defined $Opts{$_} ? "=> $Opts{$_}\n" : "\n"  foreach sort keys %Opts;
 647       printf "\tARGV(%d): ", scalar @ARGV;
 648       print @ARGV, "\n";
 649       print "get_options: exit\n";
 650    }
 651 }
 652
 653 sub add_option(@) {
 654    push @Optspec, @_;
 655 }
 656
 657 # untaint string, borrowed from amavisd-new
 658 sub untaint($) {
 659    no re 'taint';
 660
 661    my ($str);
 662    if (defined($_[0])) {
 663       local($1);            # avoid Perl taint bug: tainted global $1 propagates taintedness
 664       $str = $1  if $_[0] =~ /^(.*)$/;
 665    }
 666
 667    return $str;
 668 }
 669
 670 sub init_getopts_table_common(@) {
 671    my @supplemental_reports = @_;
 672
 673    print "init_getopts_table_common: enter\n"   if $Opts{'debug'} & D_ARGS;
 674
 675    add_option ('help',                       sub { print STDOUT Logreporters::usage(undef); exit 0 });
 676    add_option ('gen_test_log=s',             sub { Logreporters::Utils::gen_test_log($_[1]); exit 0; });
 677    add_option ('detail=i');
 678    add_option ('nodetail',                   sub {
 679       # __none__ will set all limiters to 0 in process_limiters
 680       # since they are not known (Sections table is not yet built).
 681       push @Limiters, '__none__';
 682       # 0 = disable supplemental_reports
 683       set_supplemental_reports(0, \@supplemental_reports);
 684    });
 685    add_option ('max_report_width=i');
 686    add_option ('summary!');
 687    add_option ('show_summary=i',             sub { $Opts{'summary'} = $_[1]; 1; });
 688    # untaint ipaddr_width for use w/sprintf() in Perl v5.10
 689    add_option ('ipaddr_width=i',             sub { $Opts{'ipaddr_width'} = untaint ($_[1]); 1; });
 690
 691    add_option ('sect_vars!');
 692    add_option ('show_sect_vars=i',           sub { $Opts{'sect_vars'} = $_[1]; 1; });
 693
 694    add_option ('syslog_name=s');
 695    add_option ('wrap',                       sub { $Opts{'line_style'} = $line_styles{$_[0]}; 1; });
 696    add_option ('full',                       sub { $Opts{'line_style'} = $line_styles{$_[0]}; 1; });
 697    add_option ('truncate',                   sub { $Opts{'line_style'} = $line_styles{$_[0]}; 1; });
 698    add_option ('line_style=s',               sub {
 699       my $style = lc($_[1]);
 700       my @list = grep (/^$style/, keys %line_styles);
 701       if (! @list) {
 702          print STDERR "Invalid line_style argument \"$_[1]\"\n";
 703          print STDERR "Option line_style argument must be one of \"wrap\", \"full\", or \"truncate\".\n";
 704          print STDERR "Use $Logreporters::progname --help for options\n";
 705          exit 1;
 706       }
 707       $Opts{'line_style'} = $line_styles{lc($list[0])};
 708       1;
 709    });
 710
 711    add_option ('limit|l=s',                 sub {
 712       my ($limiter,$lspec) = split(/=/, $_[1]);
 713       if (!defined $lspec) {
 714          printf STDERR "Limiter \"%s\" requires value (ex. --limit %s=10)\n", $_[1],$_[1];
 715          exit 2;
 716       }
 717       foreach my $val (split(/(?:\s+|\s*,\s*)/, $lspec)) {
 718          if ($val !~ /^\d+$/ and
 719              $val !~ /^(\d*)\.(\d+)$/ and
 720              $val !~ /^::(\d+)$/ and
 721              $val !~ /^:(\d+):(\d+)?$/ and
 722              $val !~ /^(\d+):(\d+)?:(\d+)?$/)
 723          {
 724             printf STDERR "Limiter value \"$val\" invalid in \"$limiter=$lspec\"\n";
 725             exit 2;
 726          }
 727       }
 728       push @Limiters, lc $_[1];
 729    });
 730
 731    print "init_getopts_table_common: exit\n"   if $Opts{'debug'} & D_ARGS;
 732 }
 733
 734 sub get_option_names() {
 735    my (@ret, @tmp);
 736    foreach (@Optspec) {
 737       if (ref($_) eq '') {       # process only the option names
 738          my $spec = $_;
 739          $spec =~ s/=.*$//;
 740          $spec =~ s/([^|]+)\!$/$1|no$1/g;
 741          @tmp = split /[|]/, $spec;
 742          #print "PUSHING: @tmp\n";
 743          push @ret, @tmp;
 744       }
 745    }
 746    return @ret;
 747 }
 748
 749 # Set values for the configuration variables passed via hashref.
 750 # Variables are of the form ${progname_prefix}_KEYNAME.
 751 #
 752 # Because logwatch lowercases all config file entries, KEYNAME is
 753 # case-insensitive.
 754 #
 755 sub init_cmdline() {
 756    my ($href, $configvar, $value, $var);
 757
 758    # logwatch passes all config vars via environment variables
 759    $href = $Opts{'standalone'} ? \%Configvars : \%ENV;
 760
 761    # XXX: this is cheeze: need a list of valid limiters, but since
 762    # the Sections table is not built yet, we don't know what is
 763    # a limiter and what is an option, as there is no distinction in
 764    # variable names in the config file (perhaps this should be changed).
 765    my @valid_option_names = get_option_names();
 766    die "Options table not yet set" if ! scalar @valid_option_names;
 767
 768    print "confighash_to_cmdline: @valid_option_names\n"  if $Opts{'debug'} & D_ARGS;
 769    my @cmdline = ();
 770    while (($configvar, $value) = each %$href) {
 771       if ($configvar =~ s/^${Logreporters::progname_prefix}_//o) {
 772          # distinguish level limiters from general options
 773          # would be easier if limiters had a unique prefix
 774          $configvar = lc $configvar;
 775          my $ret = grep (/^$configvar$/i, @valid_option_names);
 776          if ($ret == 0) {
 777             print "\tLIMITER($ret): $configvar = $value\n"  if $Opts{'debug'} & D_ARGS;
 778             push @cmdline, '-l', "$configvar" . "=$value";
 779          }
 780          else {
 781             print "\tOPTION($ret): $configvar = $value\n"  if $Opts{'debug'} & D_ARGS;
 782             unshift @cmdline, $value  if defined ($value);
 783             unshift @cmdline, "--$configvar";
 784          }
 785       }
 786    }
 787    unshift @ARGV, @cmdline;
 788 }
 789
 790 # Obtains the variables from a logwatch-style .conf file, for use
 791 # in standalone mode.  Returns an ENV-style hash of key/value pairs.
 792 #
 793 sub get_vars_from_file(\% $) {
 794    my ($href, $file) = @_;
 795    my ($var, $val);
 796
 797    print "get_vars_from_file: enter: processing file: $file\n" if $Opts{'debug'} & D_CONFIG;
 798
 799    my  $message = undef;
 800    my $ret = stat ($file);
 801    if ($ret == 0) { $message = $!; }
 802    elsif (! -r _) { $message = "Permission denied"; }
 803    elsif (  -d _) { $message = "Is a directory"; }
 804    elsif (! -f _) { $message = "Not a regular file"; }
 805
 806    if ($message) {
 807       print STDERR "Configuration file \"$file\": $message\n";
 808       exit 2;
 809    }
 810
 811    my $prog = $Logreporters::progname_prefix;
 812    open FILE, '<', "$file" or die "unable to open configuration file $file: $!";
 813    while (<FILE>) {
 814       chomp;
 815       next if (/^\s*$/);   # ignore all whitespace lines
 816       next if (/^\*/);     # ignore logwatch's *Service lines
 817       next if (/^\s*#/);   # ignore comment lines
 818       if (/^\s*\$(${prog}_[^=\s]+)\s*=\s*"?([^"]+)"?$/o) {
 819          ($var,$val) = ($1,$2);
 820          if    ($val =~ /^(?:no|false)$/i) { $val = 0; }
 821          elsif ($val =~ /^(?:yes|true)$/i) { $val = 1; }
 822          elsif ($val eq '')                { $var =~ s/${prog}_/${prog}_no/; $val = undef; }
 823
 824          print "\t\"$var\" => \"$val\"\n"  if $Opts{'debug'} & D_CONFIG;
 825
 826          $href->{$var} = $val;
 827       }
 828    }
 829    close FILE         or die "failed to close configuration handle for $file: $!";
 830    print "get_vars_from_file: exit\n" if $Opts{'debug'} & D_CONFIG;
 831 }
 832
 833 sub process_limiters(\@) {
 834    my ($sectref) = @_;
 835
 836    my ($limiter, $var, $val, @errors);
 837    my @l = get_usable_sectvars(@$sectref, 1);
 838
 839    if ($Opts{'debug'} & D_VARS) {
 840       print "process_limiters: enter\n";
 841       print "\tLIMITERS: @Limiters\n";
 842    }
 843    while ($limiter = shift @Limiters) {
 844       my @matched = ();
 845
 846       printf "\t%-30s  ",$limiter   if $Opts{'debug'} & D_VARS;
 847       # disable all limiters when limiter is __none__: see 'nodetail' cmdline option
 848       if ($limiter eq '__none__') {
 849          $Opts{$_} = 0 foreach @l;
 850          next;
 851       }
 852
 853       ($var,$val) = split /=/, $limiter;
 854
 855       if ($val eq '') {
 856          push @errors, "Limiter \"$var\" requires value (ex. --limit limiter=10)";
 857          next;
 858       }
 859
 860       # try exact match first, then abbreviated match next
 861       if (scalar (@matched = grep(/^$var$/, @l)) == 1 or scalar (@matched = grep(/^$var/, @l)) == 1) {
 862          $limiter = $matched[0];    # unabbreviate limiter
 863          print "MATCH: $var: $limiter => $val\n" if $Opts{'debug'} & D_VARS;
 864          # XXX move limiters into section hash entry...
 865          $Opts{$limiter} = $val;
 866          next;
 867       }
 868       print "matched=", scalar @matched, ": @matched\n" if $Opts{'debug'} & D_VARS;
 869
 870       push @errors, "Limiter \"$var\" is " . (scalar @matched == 0 ? "invalid" : "ambiguous: @matched");
 871    }
 872    print "\n" if $Opts{'debug'} & D_VARS;
 873
 874    if (@errors) {
 875       print STDERR "$_\n" foreach @errors;
 876       exit 2;
 877    }
 878
 879    # Set the default value of 10 for each section if no limiter exists.
 880    # This allows output for each section should there be no configuration
 881    # file or missing limiter within the configuration file.
 882    foreach (@l) {
 883       $Opts{$_} = 10 unless exists $Opts{$_};
 884    }
 885
 886    # Enable collection for each section if a limiter is non-zero.
 887    foreach (@l) {
 888       #print "L is: $_\n";
 889       #print "DETAIL: $Opts{'detail'}, OPTS: $Opts{$_}\n";
 890       $Logreporters::TreeData::Collecting{$_} = (($Opts{'detail'} >= 5) && $Opts{$_}) ? 1 : 0;
 891    }
 892    #print "OPTS: \n"; map { print "$_ => $Opts{$_}\n"} keys %Opts;
 893    #print "COLLECTING: \n"; map { print "$_ => $Logreporters::TreeData::Collecting{$_}\n"} keys %Logreporters::TreeData::Collecting;
 894 }
 895
 896 # Enable/disable supplemental reports
 897 # arg1:     0=off, 1=on
 898 # arg2,...: list of supplemental report keywords
 899 sub set_supplemental_reports($$) {
 900    my ($onoff,$aref) = @_;
 901
 902    $Opts{$_} = $onoff foreach (@$aref);
 903 }
 904
 905 sub process_debug_opts($) {
 906    my $optstring = shift;
 907
 908    my @errors = ();
 909    foreach (split(/\s*,\s*/, $optstring)) {
 910       my $word = lc $_;
 911       my @matched = grep (/^$word/, keys %debug_words);
 912
 913       if (scalar @matched == 1) {
 914          $Opts{'debug'} |= $debug_words{$matched[0]};
 915          next;
 916       }
 917
 918       if (scalar @matched == 0) {
 919          push @errors, "Unknown debug keyword \"$word\"";
 920       }
 921       else {  # > 1
 922          push @errors, "Ambiguous debug keyword abbreviation \"$word\": (matches: @matched)";
 923       }
 924    }
 925    if (@errors) {
 926       print STDERR "$_\n" foreach @errors;
 927       print STDERR "Debug keywords: ", join (' ', sort keys %debug_words), "\n";
 928       exit 2;
 929    }
 930 }
 931
 932 # Zero the options controlling level specs and those
 933 # any others passed via Opts key.
 934 #
 935 # Zero the options controlling level specs in the
 936 # Detailed section, and set all other report options
 937 # to disabled. This makes it easy via command line to
 938 # disable the entire summary section, and then re-enable
 939 # one or more sections for specific reports.
 940 #
 941 #   eg. progname --nodetail --limit forwarded=2
 942 #
 943 sub zero_opts ($ @) {
 944    my $sectref = shift;
 945    # remaining args: list of Opts keys to zero
 946
 947    map { $Opts{$_} = 0; print "zero_opts: $_ => 0\n" if $Opts{'debug'} & D_VARS;} @_;
 948    map { $Opts{$_} = 0 } get_usable_sectvars(@$sectref, 1);
 949 }
 950
 951 1;
 952
 953 #MODULE: ../Logreporters/TreeData.pm
 954 package Logreporters::TreeData;
 955
 956 use 5.008;
 957 use strict;
 958 use re 'taint';
 959 use warnings;
 960 no warnings "uninitialized";
 961
 962 BEGIN {
 963    use Exporter ();
 964    use vars qw(@ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $VERSION);
 965    $VERSION = '1.001';
 966    @ISA = qw(Exporter);
 967    @EXPORT = qw(%Totals %Counts %Collecting $END_KEY);
 968    @EXPORT_OK = qw(&printTree &buildTree);
 969
 970 }
 971
 972 use subs @EXPORT_OK;
 973
 974 BEGIN {
 975    import Logreporters::Config qw(%line_styles);
 976 }
 977
 978 # Totals and Counts are the log line accumulator hashes.
 979 # Totals: maintains per-section grand total tallies for use in Summary section
 980 # Counts: is a multi-level hash, which maintains per-level key totals.
 981 our (%Totals, %Counts);
 982
 983 # The Collecting hash determines which sections will be captured in
 984 # the Counts hash.  Counts are collected only if a section is enabled,
 985 # and this hash obviates the need to test both existence and
 986 # non-zero-ness of the Opts{'keyname'} (either of which cause capture).
 987 # XXX The Opts hash could be used ....
 988 our %Collecting = ();
 989
 990 sub buildTree(\% $ $ $ $ $);
 991 sub printTree($ $ $ $ $);
 992 =pod
 993 [ a:b:c, ... ]
 994
 995 which would be interpreted as follows:
 996
 997 a = show level a detail
 998 b = show at most b items at this level
 999 c = minimun count that will be shown
1000 =cut
1001
1002 sub printTree($ $ $ $ $) {
1003    my ($treeref, $lspecsref, $line_style, $max_report_width, $debug) = @_;
1004    my ($entry, $line);
1005    my $cutlength = $max_report_width - 3;
1006
1007    my $topn = 0;
1008    foreach $entry (sort bycount @$treeref) {
1009       ref($entry) ne "HASH" and die "Unexpected entry in tree: $entry\n";
1010
1011       #print "LEVEL: $entry->{LEVEL}, TOTAL: $entry->{TOTAL}, HASH: $entry, DATA: $entry->{DATA}\n";
1012
1013       # Once the top N lines have been printed, we're done
1014       if ($lspecsref->[$entry->{LEVEL}]{topn}) {
1015          if ($topn++ >= $lspecsref->[$entry->{LEVEL}]{topn} ) {
1016             print '     ', '   ' x ($entry->{LEVEL} + 3), "...\n"
1017                unless ($debug) and do {
1018                      $line = '     ' . '   ' x ($entry->{LEVEL} + 3) . '...';
1019                      printf "%-130s L%d: topn reached(%d)\n", $line, $entry->{LEVEL} + 1, $lspecsref->[$entry->{LEVEL}]{topn};
1020                };
1021             last;
1022          }
1023       }
1024
1025       # Once the item's count falls below the given threshold, we're done at this level
1026       # unless a top N is specified, as threshold has lower priority than top N
1027       elsif ($lspecsref->[$entry->{LEVEL}]{threshold}) {
1028          if ($entry->{TOTAL} <= $lspecsref->[$entry->{LEVEL}]{threshold}) {
1029             print '     ', '   ' x ($entry->{LEVEL} + 3), "...\n"
1030                unless ($debug) and do {
1031                   $line = '     ' . ('   ' x ($entry->{LEVEL} + 3)) . '...';
1032                   printf "%-130s L%d: threshold reached(%d)\n", $line, $entry->{LEVEL} + 1, $lspecsref->[$entry->{LEVEL}]{threshold};
1033                };
1034             last;
1035          }
1036       }
1037
1038       $line = sprintf "%8d%s%s", $entry->{TOTAL}, '   ' x ($entry->{LEVEL} + 2),  $entry->{DATA};
1039
1040       if ($debug) {
1041          printf "%-130s %-60s\n", $line, $entry->{DEBUG};
1042       }
1043
1044       # line_style full, or lines < max_report_width
1045
1046       #printf "MAX: $max_report_width, LEN: %d, CUTLEN $cutlength\n", length($line);
1047       if ($line_style == $line_styles{'full'} or length($line) <= $max_report_width) {
1048          print $line, "\n";
1049       }
1050       elsif ($line_style == $line_styles{'truncate'}) {
1051          print substr ($line,0,$cutlength), '...', "\n";
1052       }
1053       elsif ($line_style == $line_styles{'wrap'}) {
1054          my $leader = ' ' x 8 . '   ' x ($entry->{LEVEL} + 2);
1055          print substr ($line, 0, $max_report_width, ''), "\n";
1056          while (length($line)) {
1057             print $leader, substr ($line, 0, $max_report_width - length($leader), ''), "\n";
1058          }
1059       }
1060       else {
1061          die ('unexpected line style');
1062       }
1063
1064       printTree ($entry->{CHILDREF}, $lspecsref, $line_style, $max_report_width, $debug)   if (exists $entry->{CHILDREF});
1065    }
1066 }
1067
1068 my $re_IP_strict = qr/\b(25[0-5]|2[0-4]\d|[01]?\d{1,2})\.(25[0-5]|2[0-4]\d|[01]?\d{1,2})\.(25[0-5]|2[0-4]\d|[01]?\d{1,2})\.(25[0-5]|2[0-4]\d|[01]?\d{1,2})\b/;
1069 # XXX optimize this using packed default sorting.  Analysis shows speed isn't an issue though
1070 sub bycount {
1071    # Sort by totals, then IP address if one exists, and finally by data as a string
1072
1073    local $SIG{__WARN__} = sub { print "*** PLEASE REPORT:\n*** $_[0]*** Unexpected: \"$a->{DATA}\", \"$b->{DATA}\"\n" };
1074
1075    $b->{TOTAL} <=> $a->{TOTAL}
1076
1077       ||
1078
1079    pack('C4' => $a->{DATA} =~ /^$re_IP_strict/o) cmp pack('C4' => $b->{DATA} =~ /^$re_IP_strict/o)
1080
1081       ||
1082
1083    $a->{DATA} cmp $b->{DATA}
1084 }
1085
1086 #
1087 # Builds a tree of REC structures from the multi-key %Counts hashes
1088 #
1089 # Parameters:
1090 #    Hash:  A multi-key hash, with keys being used as category headings, and leaf data
1091 #           being tallies for that set of keys
1092 #    Level: This current recursion level.  Call with 0.
1093 #
1094 # Returns:
1095 #    Listref: A listref, where each item in the list is a rec record, described as:
1096 #           DATA:      a string: a heading, or log data
1097 #           TOTAL:     an integer: which is the subtotal of this item's children
1098 #           LEVEL:     an integer > 0: representing this entry's level in the tree
1099 #           CHILDREF:  a listref: references a list consisting of this node's children
1100 #    Total: The cummulative total of items found for a given invocation
1101 #
1102 # Use the special key variable $END_KEY, which is "\a\a" (two ASCII bell's) to end a,
1103 # nested hash early, or the empty string '' may be used as the last key.
1104
1105 our $END_KEY = "\a\a";
1106
1107 sub buildTree(\% $ $ $ $ $) {
1108    my ($href, $max_level_section, $levspecref, $max_level_global, $recurs_level, $show_unique, $debug) = @_;
1109    my ($subtotal, $childList, $rec);
1110
1111    my @treeList = ();
1112    my $total = 0;
1113
1114    foreach my $item (sort keys %$href) {
1115       if (ref($href->{$item}) eq "HASH") {
1116          #print " " x ($recurs_level * 4), "HASH: LEVEL $recurs_level: Item: $item, type: \"", ref($href->{$item}), "\"\n";
1117
1118          ($subtotal, $childList) = buildTree (%{$href->{$item}}, $max_level_section, $levspecref, $max_level_global, $recurs_level + 1, $debug);
1119
1120          if ($recurs_level < $max_level_global and $recurs_level < $max_level_section) {
1121             # me + children
1122             $rec = {
1123                DATA     => $item,
1124                TOTAL    => $subtotal,
1125                LEVEL    => $recurs_level,
1126                CHILDREF => $childList,
1127             };
1128
1129             if ($debug) {
1130                $rec->{DEBUG} = sprintf "L%d: levelspecs: %2d/%2d/%2d/%2d, Count: %10d",
1131                      $recurs_level + 1, $max_level_global, $max_level_section,
1132                      $levspecref->[$recurs_level]{topn}, $levspecref->[$recurs_level]{threshold}, $subtotal;
1133             }
1134             push (@treeList, $rec);
1135          }
1136       }
1137       else {
1138          if ($item ne '' and $item ne $END_KEY and $recurs_level < $max_level_global and $recurs_level < $max_level_section) {
1139             $rec = {
1140                DATA  => $item,
1141                TOTAL => $href->{$item},
1142                LEVEL => $recurs_level,
1143                #CHILDREF => undef,
1144             };
1145             if ($debug) {
1146                $rec->{DEBUG} = sprintf "L%d: levelspecs: %2d/%2d/%2d/%2d, Count: %10d",
1147                      $recurs_level, $max_level_global, $max_level_section,
1148                      $levspecref->[$recurs_level]{topn}, $levspecref->[$recurs_level]{threshold}, $href->{$item};
1149             }
1150             push (@treeList,  $rec);
1151          }
1152          $subtotal = $href->{$item};
1153       }
1154
1155       $total += $subtotal;
1156    }
1157
1158    #print " " x ($recurs_level * 4), "LEVEL $recurs_level: Returning from recurs_level $recurs_level\n";
1159
1160    return ($total, \@treeList);
1161 }
1162
1163 1;
1164
1165 #MODULE: ../Logreporters/Reports.pm
1166 package Logreporters::Reports;
1167
1168 use 5.008;
1169 use strict;
1170 use re 'taint';
1171 use warnings;
1172 no warnings "uninitialized";
1173
1174 BEGIN {
1175    use Exporter ();
1176    use vars qw(@ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $VERSION);
1177    $VERSION = '1.002';
1178    @ISA = qw(Exporter);
1179    @EXPORT = qw(&inc_unmatched &print_unmatched_report &print_percentiles_report2
1180                 &print_summary_report &print_detail_report);
1181    @EXPORT_OK = qw();
1182 }
1183
1184 use subs @EXPORT_OK;
1185
1186 BEGIN {
1187    import Logreporters::Config qw(%Opts $fw1 $fw2 $sep1 $sep2 &D_UNMATCHED &D_TREE);
1188    import Logreporters::Utils qw(&commify &unitize &get_percentiles &get_percentiles2);
1189    import Logreporters::TreeData qw(%Totals %Counts &buildTree &printTree);
1190 }
1191
1192 my (%unmatched_list);
1193
1194 our $origline;       # unmodified log line, for error reporting and debug
1195
1196 sub inc_unmatched($) {
1197    my ($id) = @_;
1198    $unmatched_list{$origline}++;
1199    print "UNMATCHED($id): \"$origline\"\n"  if $Opts{'debug'} & D_UNMATCHED;
1200 }
1201
1202 # Print unmatched lines
1203 #
1204 sub print_unmatched_report() {
1205    return unless (keys %unmatched_list);
1206
1207    print "\n\n**Unmatched Entries**\n";
1208    foreach my $line (sort {$unmatched_list{$b}<=>$unmatched_list{$a} } keys %unmatched_list) {
1209       printf "%8d   %s\n", $unmatched_list{$line}, $line;
1210    }
1211 }
1212
1213 =pod
1214    ****** Summary ********************************************************
1215           2   Miscellaneous warnings
1216
1217       20621   Total messages scanned ----------------  100.00%
1218     662.993M  Total bytes scanned                  695,198,092
1219    ========   ================================================
1220
1221       19664   Ham -----------------------------------   95.36%
1222       19630     Clean passed                            95.19%
1223          34     Bad header passed                        0.16%
1224
1225         942   Spam ----------------------------------    4.57%
1226         514     Spam blocked                             2.49%
1227         428     Spam discarded (no quarantine)           2.08%
1228
1229          15   Malware -------------------------------    0.07%
1230          15     Malware blocked                          0.07%
1231
1232
1233        1978   SpamAssassin bypassed
1234          18   Released from quarantine
1235        1982   Whitelisted
1236           3   Blacklisted
1237          12   MIME error
1238          51   Bad header (debug supplemental)
1239          28   Extra code modules loaded at runtime
1240 =cut
1241 # Prints the Summary report section
1242 #
1243 sub print_summary_report (\@) {
1244    my ($sections) = @_;
1245    my ($keyname,$cur_level);
1246    my @lines;
1247
1248    my $expand_header_footer = sub {
1249       my $line = undef;
1250
1251       foreach my $horf (@_) {
1252          # print blank line if keyname is newline
1253          if ($horf eq "\n") {
1254             $line .= "\n";
1255          }
1256          elsif (my ($sepchar) = ($horf =~ /^(.)$/o)) {
1257             $line .= sprintf "%s   %s\n", $sepchar x 8, $sepchar x 50;
1258          }
1259          else {
1260             die "print_summary_report: unsupported header or footer type \"$horf\"";
1261          }
1262       }
1263       return $line;
1264    };
1265
1266    if ($Opts{'detail'} >= 5) {
1267       my $header = "****** Summary ";
1268       print $header, '*' x ($Opts{'max_report_width'} - length $header), "\n\n";
1269    }
1270
1271    my @headers;
1272    foreach my $sref (@$sections) {
1273       # headers and separators
1274       die "Unexpected Section $sref"  if (ref($sref) ne 'HASH');
1275
1276       # Start of a new section group.
1277       # Expand and save headers to output at end of section group.
1278       if ($sref->{CLASS} eq 'GROUP_BEGIN') {
1279          $cur_level = $sref->{LEVEL};
1280          $headers[$cur_level] = &$expand_header_footer(@{$sref->{HEADERS}});
1281       }
1282
1283       elsif ($sref->{CLASS} eq 'GROUP_END') {
1284          my $prev_level = $sref->{LEVEL};
1285
1286          # If this section had lines to output, tack on headers and footers,
1287          # removing extraneous newlines.
1288          if ($lines[$cur_level]) {
1289             # squish multiple blank lines
1290             if ($headers[$cur_level] and substr($headers[$cur_level],0,1) eq "\n") {
1291                if ( ! defined $lines[$prev_level][-1] or $lines[$prev_level][-1] eq "\n") {
1292                   $headers[$cur_level] =~ s/^\n+//;
1293                }
1294             }
1295
1296             push @{$lines[$prev_level]}, $headers[$cur_level]  if $headers[$cur_level];
1297             push @{$lines[$prev_level]}, @{$lines[$cur_level]};
1298             my $f = &$expand_header_footer(@{$sref->{FOOTERS}});
1299             push @{$lines[$prev_level]}, $f   if $f;
1300             $lines[$cur_level] = undef;
1301          }
1302
1303          $headers[$cur_level] = undef;
1304          $cur_level = $prev_level;
1305       }
1306
1307       elsif ($sref->{CLASS} eq 'DATA') {
1308          # Totals data
1309          $keyname = $sref->{NAME};
1310          if ($Totals{$keyname} > 0) {
1311             my ($numfmt, $desc, $divisor) = ($sref->{FMT}, $sref->{TITLE}, $sref->{DIVISOR});
1312
1313             my $fmt   = '%8';
1314             my $extra = ' %25s';
1315             my $total = $Totals{$keyname};
1316
1317             # Z format provides  unitized or unaltered totals, as appropriate
1318             if ($numfmt eq 'Z') {
1319                ($total, $fmt) = unitize ($total, $fmt);
1320             }
1321             else {
1322                $fmt .= "$numfmt ";
1323                $extra = '';
1324             }
1325
1326             if ($divisor and $$divisor) {
1327                # XXX generalize this
1328                if (ref ($desc) eq 'ARRAY') {
1329                   $desc = @$desc[0] . ' ' . @$desc[1] x (42 - 2 - length(@$desc[0]));
1330                }
1331
1332                push @{$lines[$cur_level]},
1333                   sprintf "$fmt  %-42s %6.2f%%\n", $total, $desc,
1334                      $$divisor == $Totals{$keyname} ? 100.00 : $Totals{$keyname} * 100 / $$divisor;
1335             }
1336             else {
1337                 my $new_line;
1338                 if ($extra eq '') {
1339                     $new_line = sprintf("$fmt  %-23s \n", $total, $desc);
1340                 }
1341                 else {
1342                     $new_line = sprintf("$fmt  %-23s $extra\n",
1343                                         $total,
1344                                         $desc,
1345                                         commify ($Totals{$keyname}));
1346                 }
1347                 push @{$lines[$cur_level]}, $new_line
1348             }
1349          }
1350       }
1351       else {
1352          die "print_summary_report: unexpected control...";
1353       }
1354    }
1355    print @{$lines[0]};
1356    print "\n";
1357 }
1358
1359 # Prints the Detail report section
1360 #
1361 # Note: side affect; deletes each key in Totals/Counts
1362 # after printout.  Only the first instance of a key in
1363 # the Section table will result in Detail output.
1364 sub print_detail_report (\@) {
1365    my ($sections) = @_;
1366    my $header_printed = 0;
1367
1368    return unless (keys %Counts);
1369
1370 #use Devel::Size qw(size total_size);
1371
1372    foreach my $sref ( @$sections ) {
1373       next unless $sref->{CLASS} eq 'DATA';
1374       # only print detail for this section if DETAIL is enabled
1375       # and there is something in $Counts{$keyname}
1376       next unless $sref->{DETAIL};
1377       next unless exists $Counts{$sref->{NAME}};
1378
1379       my $keyname = $sref->{NAME};
1380       my $max_level = undef;
1381       my $print_this_key = 0;
1382
1383       my @levelspecs = ();
1384       clear_level_specs($max_level, \@levelspecs);
1385       if (exists $Opts{$keyname}) {
1386          $max_level = create_level_specs($Opts{$keyname}, $Opts{'detail'}, \@levelspecs);
1387          $print_this_key = 1  if ($max_level);
1388       }
1389       else {
1390          $print_this_key = 1;
1391       }
1392       #print_level_specs($max_level,\@levelspecs);
1393
1394       # at detail 5, print level 1, detail 6: level 2, ...
1395
1396 #print STDERR "building: $keyname\n";
1397       my ($count, $treeref) =
1398             buildTree (%{$Counts{$keyname}}, defined ($max_level) ? $max_level : 11,
1399                        \@levelspecs, $Opts{'detail'} - 4, 0, $Opts{'debug'} & D_TREE);
1400
1401       if ($count > 0) {
1402          if ($print_this_key) {
1403             my $desc = $sref->{TITLE};
1404             $desc =~ s/^\s+//;
1405
1406             if (! $header_printed) {
1407                my $header = "****** Detail ($max_level) ";
1408                print $header, '*' x ($Opts{'max_report_width'} - length $header), "\n";
1409                $header_printed = 1;
1410             }
1411             printf "\n%8d   %s %s\n", $count, $desc,
1412                      $Opts{'sect_vars'} ?
1413                        ('-' x ($Opts{'max_report_width'} - 18 - length($desc) - length($keyname))) . " [ $keyname ] -" :
1414                         '-' x ($Opts{'max_report_width'} - 12 - length($desc))
1415          }
1416
1417          printTree ($treeref, \@levelspecs, $Opts{'line_style'}, $Opts{'max_report_width'},
1418                     $Opts{'debug'} & D_TREE);
1419       }
1420 #print STDERR "Total size Counts: ", total_size(\%Counts), "\n";
1421 #print STDERR "Total size Totals: ", total_size(\%Totals), "\n";
1422       $treeref = undef;
1423       $Totals{$keyname} = undef;
1424       delete $Totals{$keyname};
1425       delete $Counts{$keyname};
1426    }
1427    #print "\n";
1428 }
1429
1430 =pod
1431
1432 Print out a standard percentiles report
1433
1434    === Delivery Delays Percentiles ===============================================================
1435                           0%       25%       50%       75%       90%       95%       98%      100%
1436    -----------------------------------------------------------------------------------------------
1437    Before qmgr          0.01      0.70      1.40  45483.70  72773.08  81869.54  87327.42  90966.00
1438    In qmgr              0.00      0.00      0.00      0.01      0.01      0.01      0.01      0.01
1439    Conn setup           0.00      0.00      0.00      0.85      1.36      1.53      1.63      1.70
1440    Transmission         0.03      0.47      0.92      1.61      2.02      2.16      2.24      2.30
1441    Total                0.05      1.18      2.30  45486.15  72776.46  81873.23  87331.29  90970.00
1442    ===============================================================================================
1443
1444    === Postgrey Delays Percentiles ===========================================================
1445                       0%       25%       50%       75%       90%       95%       98%      100%
1446    -------------------------------------------------------------------------------------------
1447    Postgrey       727.00    727.00    727.00    727.00    727.00    727.00    727.00    727.00
1448    ===========================================================================================
1449
1450  tableref:
1451    data table: ref to array of arrays, first cell is label, subsequent cells are data
1452  title:
1453    table's title
1454  percentiles_str:
1455    string of space or comma separated integers, which are the percentiles
1456    calculated and output as table column data
1457 =cut
1458 sub print_percentiles_report2($$$) {
1459    my ($tableref, $title, $percentiles_str) = @_;
1460
1461    return unless @$tableref;
1462
1463    my $myfw2 = $fw2 - 1;
1464    my @percents = split /[ ,]/, $percentiles_str;
1465
1466    # Calc y label width from the hash's keys. Each key is padded with the
1467    # string "#: ", # where # is a single-digit sort index.
1468    my $y_label_max_width = 0;
1469    for (@$tableref) {
1470       $y_label_max_width = length($_->[0])   if (length($_->[0]) > $y_label_max_width);
1471    }
1472
1473    # Titles row
1474    my $col_titles_str = sprintf "%-${y_label_max_width}s" . "%${myfw2}s%%" x @percents , ' ', @percents;
1475    my $table_width = length($col_titles_str);
1476
1477    # Table header row
1478    my $table_header_str = sprintf "%s %s ", $sep1 x 3, $title;
1479    $table_header_str .= $sep1 x ($table_width - length($table_header_str));
1480
1481    print "\n", $table_header_str;
1482    print "\n", $col_titles_str;
1483    print "\n", $sep2 x $table_width;
1484
1485    my (@p, @coldata, @xformed);
1486    foreach (@$tableref) {
1487       my ($title, $ref) = ($_->[0], $_->[1]);
1488       #xxx my @sorted = sort { $a <=> $b } @{$_->[1]};
1489
1490       my @byscore = ();
1491
1492       for my $bucket (sort { $a <=> $b } keys %$ref) {
1493       #print "Key: $title: Bucket: $bucket = $ref->{$bucket}\n";
1494       # pairs: bucket (i.e. key), tally
1495          push @byscore, $bucket, $ref->{$bucket};
1496       }
1497
1498
1499       my @p = get_percentiles2 (@byscore, @percents);
1500       printf "\n%-${y_label_max_width}s" . "%${fw2}.2f" x scalar (@p), $title, @p;
1501    }
1502
1503 =pod
1504    foreach (@percents) {
1505       #printf "\n%-${y_label_max_width}s" . "%${fw2}.2f" x scalar (@p), substr($title,3), @p;
1506       printf "\n%3d%%", $title;
1507       foreach my $val (@{shift @xformed}) {
1508          my $unit;
1509          if ($val > 1000) {
1510             $unit = 's';
1511             $val /= 1000;
1512          }
1513          else {
1514             $unit = '';
1515          }
1516          printf "%${fw3}.2f%-2s", $val, $unit;
1517       }
1518    }
1519 =cut
1520
1521    print "\n", $sep1 x $table_width, "\n";
1522 }
1523
1524 sub clear_level_specs($ $) {
1525    my ($max_level,$lspecsref) = @_;
1526    #print "Zeroing $max_level rows of levelspecs\n";
1527    $max_level = 0 if (not defined $max_level);
1528    for my $x (0..$max_level) {
1529       $lspecsref->[$x]{topn}      = undef;
1530       $lspecsref->[$x]{threshold} = undef;
1531    }
1532 }
1533
1534 # topn      = 0 means don't limit
1535 # threshold = 0 means no min threshold
1536 sub create_level_specs($ $ $) {
1537    my ($optkey,$gdetail,$lspecref) = @_;
1538
1539    return 0 if ($optkey eq "0");
1540
1541    my $max_level = $gdetail;            # default to global detail level
1542    my (@specsP1, @specsP2, @specsP3);
1543
1544    #printf "create_level_specs: key: %s => \"%s\", max_level: %d\n", $optkey, $max_level;
1545
1546    foreach my $sp (split /[\s,]+/, $optkey) {
1547       #print "create_level_specs:  SP: \"$sp\"\n";
1548       # original level specifier
1549       if ($sp =~ /^\d+$/) {
1550          $max_level = $sp;
1551          #print "create_level_specs:  max_level set: $max_level\n";
1552       }
1553       # original level specifier + topn at level 1
1554       elsif ($sp =~ /^(\d*)\.(\d+)$/) {
1555          if ($1) { $max_level = $1; }
1556          else    { $max_level = $gdetail; }           # top n specified, but no max level
1557
1558          # force top N at level 1 (zero based)
1559          push @specsP1, { level => 0, topn => $2, threshold => 0 };
1560       }
1561       # newer level specs
1562       elsif ($sp =~ /^::(\d+)$/) {
1563          push @specsP3, { level => undef, topn => 0, threshold => $1 };
1564       }
1565       elsif ($sp =~ /^:(\d+):(\d+)?$/) {
1566          push @specsP2, { level => undef, topn => $1, threshold => defined $2 ? $2 : 0 };
1567       }
1568       elsif ($sp =~ /^(\d+):(\d+)?:(\d+)?$/) {
1569          push @specsP1, { level => ($1 > 0 ? $1 - 1 : 0), topn => $2 ? $2 : 0, threshold => $3 ? $3 : 0 };
1570       }
1571       else {
1572          print STDERR "create_level_specs: unexpected levelspec ignored: \"$sp\"\n";
1573       }
1574    }
1575
1576    #foreach my $sp (@specsP3, @specsP2, @specsP1) {
1577    #   printf "Sorted specs: L%d, topn: %3d, threshold: %3d\n", $sp->{level}, $sp->{topn}, $sp->{threshold};
1578    #}
1579
1580    my ($min, $max);
1581    foreach my $sp ( @specsP3, @specsP2, @specsP1) {
1582       ($min, $max) = (0, $max_level);
1583
1584       if (defined $sp->{level}) {
1585          $min = $max = $sp->{level};
1586       }
1587       for my $level ($min..$max) {
1588          #printf "create_level_specs: setting L%d, topn: %s, threshold: %s\n", $level, $sp->{topn}, $sp->{threshold};
1589          $lspecref->[$level]{topn}      = $sp->{topn}          if ($sp->{topn});
1590          $lspecref->[$level]{threshold} = $sp->{threshold}     if ($sp->{threshold});
1591       }
1592    }
1593
1594    return $max_level;
1595 }
1596
1597 sub print_level_specs($ $) {
1598    my ($max_level,$lspecref) = @_;
1599    for my $level (0..$max_level) {
1600       printf "LevelSpec Row %d: %3d %3d\n", $level, $lspecref->[$level]{topn}, $lspecref->[$level]{threshold};
1601    }
1602 }
1603
1604
1605 1;
1606
1607
1608 package Logreporters;
1609
1610 BEGIN {
1611    import Logreporters::Utils;
1612    import Logreporters::Config;
1613    import Logreporters::TreeData qw(%Totals %Counts %Collecting printTree buildTree);
1614    import Logreporters::Reports;
1615 }
1616 use 5.008;
1617 use strict;
1618 use warnings;
1619 no warnings "uninitialized";
1620 use re 'taint';
1621
1622 use Getopt::Long;
1623 use File::Basename;
1624
1625 our $progname        =  fileparse($0);
1626
1627 # the list of supplemental reports available in the Detail section
1628 #p0f
1629 my @supplemental_reports = qw(
1630    autolearn score_percentiles score_frequencies sarules timings sa_timings startinfo
1631 );
1632
1633 # Default values for various options, used if no config file exists,
1634 # or some option is not set.
1635 #
1636 # These are used to reset default values after an option has been
1637 # disabled (via undef'ing its value).  This allows a report to be
1638 # disabled via config file or --nodetail, but reenabled via subsequent
1639 # command line option
1640 my %Defaults = (
1641    detail                 => 10,                      # report level detail
1642    max_report_width       => 100,                     # maximum line width for report output
1643    line_style             => undef,                   # lines > max_report_width, 0=truncate,1=wrap,2=full
1644    syslog_name            => $progname_prefix,        # amavis' syslog service name
1645    sect_vars              => 0,                       # show section vars in detail report hdrs
1646    ipaddr_width           => 15,                      # width for printing ip addresses
1647    first_recip_only       => 0,                       # Show only the first recipient, or all
1648
1649    autolearn              => 1,                       # show Autolearn report
1650    bayes                  => 1,                       # show hit Bayesian buckets
1651    #p0f                    => 'all all',               # p0f hits report
1652    sarules                => '20 20',                 # show SpamAssassin rules hit
1653    score_frequencies      => '-10 -5 0 5 10 20 30',   # buckets shown in spam scores report
1654    score_percentiles      => '0 50 90 95 98 100',     # percentiles shown in spam scores report
1655    startinfo              => 1,                       # show amavis startup info
1656    timings                => 95,                      # show top N% of the timings report
1657    timings_percentiles    => '0 5 25 50 75 95 100',   # percentiles shown in timing report
1658    sa_timings             => 95,                      # show top N% of the SA timings report
1659    sa_timings_percentiles => '0 5 25 50 75 95 100',   # percentiles shown in SA timing report
1660 );
1661
1662 my $usage_str = <<"END_USAGE";
1663 Usage: $progname [ ARGUMENTS ] [logfile ...]
1664
1665    ARGUMENTS can be one or more of options listed below.  Later options override earlier ones.
1666    Any argument may be abbreviated to an unambiguous length.  Input comes from named logfiles,
1667    or STDIN.
1668
1669    --debug AREAS                       provide debug output for AREAS
1670    --help                              print usage information
1671    --version                           print program version
1672
1673    --config_file FILE, -f FILE         use alternate configuration file FILE
1674    --syslog_name PATTERN               only consider log lines that match
1675                                        syslog service name PATTERN
1676
1677    --detail LEVEL                      print LEVEL levels of detail
1678                                        (default: 10)
1679    --nodetail                          set all detail levels to 0
1680    --[no]summary                       display the summary section
1681
1682    --ipaddr_width WIDTH                use WIDTH chars for IP addresses in
1683                                        address/hostname pairs
1684    --line_style wrap|full|truncate     disposition of lines > max_report_width
1685                                        (default: truncate)
1686    --full                              same as --line_style=full
1687    --truncate                          same as --line_style=truncate
1688    --wrap                              same as --line_style=wrap
1689    --max_report_width WIDTH            limit report width to WIDTH chars
1690                                        (default: 100)
1691    --limit L=V, -l L=V                 set level limiter L with value V
1692    --[no]sect_vars                     [do not] show config file var/cmd line
1693                                        option names in section titles
1694
1695    --[no]autolearn                     show autolearn report
1696    --[no]by_ccat_summary               include by contents category grouping in summary
1697    --[no]first_recip_only              show first recipient only, or all recipients
1698    --nosarules                         disable SpamAssassin spam and ham rules hit reports
1699    --sarules "S,H"                     enable SpamAssassin spam and ham rules reports, showing
1700    --sarules "default"                 showing the top S spam and top H ham rules hit (range:
1701                                        0..., "all", or the keyword "default").
1702    --noscore_frequencies               disable spam score frequency report
1703    --score_frequencies "B1 [B2 ...]"   enable spam score frequency report, using buckets
1704    --score_frequencies "default"       specified with B1 [B2 ...] (range: real numbers), or using their
1705                                        internal default values when the keyword "default" is given
1706    --noscore_percentiles               disable spam score percentiles report
1707    --score_percentiles "P1 [P2 ...]"   enable spam score percentiles report, using percentiles
1708    --score_percentiles "default"       specified with P1 [P2 ...] (range: 0...100), or using their
1709                                        internal default values when the keyword "default" is given
1710    --[no]startinfo                     show latest amavis startup details, if available
1711
1712    --nosa_timings                      disable the SA timings report (same as --sa_timings 0)
1713    --sa_timings PERCENT                show top PERCENT percent of the SA timings report (range: 0...100)
1714    --sa_timings_percentiles "P1 [P2 ...]"
1715                                        set SA timings report percentiles to P1 [P2 ...]  (range: 0...100)
1716
1717    --notimings                         disable the timings report (same as --timings 0)
1718    --timings PERCENT                   show top PERCENT percent of the timings report (range: 0...100)
1719    --timings_percentiles "P1 [P2 ...]" set timings report percentiles to P1 [P2 ...]  (range: 0...100)
1720 END_USAGE
1721
1722 # local prototypes
1723 sub usage($);
1724 sub init_getopts_table();
1725 sub init_defaults();
1726 sub build_sect_table();
1727
1728 sub parse_vals($$);
1729 sub triway_opts($$);
1730
1731 sub printSpamScorePercentilesReport;
1732 sub printSpamScoreFrequencyReport;
1733 sub printAutolearnReport;
1734 sub printSARulesReport;
1735 sub printTimingsReport($$$$);
1736 sub printStartupInfoReport;
1737 sub strip_trace($);
1738 sub prioritize_cmdline(@);
1739
1740 sub create_ignore_list();
1741 sub check_ignore_list($ \@);
1742
1743 # lines that match any RE in this list will be ignored.
1744 # see create_ignore_list();
1745 my @ignore_list_final = ();
1746
1747 # The Sections table drives Summary and Detail reports.  For each entry in the
1748 # table, if there is data avaialable, a line will be output in the Summary report.
1749 # Additionally, a sub-section will be output in the Detail report if both the
1750 # global --detail, and the section's limiter variable, are sufficiently high (a
1751 # non-existent section limiter variable is considered to be sufficiently high).
1752 #
1753 my @Sections;
1754
1755 # Initialize main running mode and basic opts
1756 init_run_mode($config_file);
1757
1758 # Configure the Getopts options table
1759 init_getopts_table();
1760
1761 # Place configuration file/environment variables onto command line
1762 init_cmdline();
1763
1764 # Initialize default values
1765 init_defaults();
1766
1767 # Process command line arguments, 0=no_permute,no_pass_through
1768 get_options(0);
1769
1770 # Build the Section table
1771 build_sect_table();
1772
1773 # Run through the list of Limiters, setting the limiters in %Opts.
1774 process_limiters(@Sections);
1775
1776 # Set collection for any enabled supplemental sections
1777 foreach (@supplemental_reports) {
1778    $Logreporters::TreeData::Collecting{$_} = (($Opts{'detail'} >= 5) && $Opts{$_}) ? 1 : 0;
1779 }
1780
1781 # Don't collect SpamScores when not necessary
1782 $Collecting{'spamscores'} = ($Opts{'detail'} >= 5 && ($Opts{'score_percentiles'} || $Opts{'score_frequencies'})) ? 1 : 0;
1783
1784 if (! defined $Opts{'line_style'}) {
1785    # default line style to full if detail >= 11, or truncate otherwise
1786    $Opts{'line_style'} =
1787       ($Opts{'detail'} > 10) ? $line_styles{'full'} : $line_styles{'truncate'};
1788 }
1789
1790 # Create the list of REs used to match against log lines
1791 create_ignore_list();
1792
1793 my (%Timings, %TimingsSA, @TimingsTotals, @TimingsSATotals);
1794 my (%SaveLine, %StartInfo);
1795 my (%SpamScores, %spamtags, %p0ftags);
1796
1797 # Priority: VIRUS BANNED UNCHECKED SPAM SPAMMY BADH OVERSIZED MTA CLEAN
1798 my %ccatmajor_to_sectkey = (
1799    'INFECTED'    => 'malware',
1800    'BANNED'      => 'bannedname',
1801    'UNCHECKED'   => 'unchecked',
1802    'SPAM'        => 'spam',
1803    'SPAMMY'      => 'spammy',
1804    'BAD-HEADER'  => 'badheader',
1805    'OVERSIZED'   => 'oversized',
1806    'MTA-BLOCKED' => 'mta',
1807    'CLEAN'       => 'clean',
1808    'TEMPFAIL'    => 'tempfail',
1809    'OTHER'       => 'other',
1810 );
1811
1812 my %ccatmajor_to_priority = (
1813    'INFECTED'    => 9,
1814    'BANNED'      => 8,
1815    'UNCHECKED'   => 7,
1816    'SPAM'        => 6,
1817    'SPAMMY'      => 5,
1818    'BAD-HEADER'  => 4,
1819    'OVERSIZED'   => 3,
1820    'MTA-BLOCKED' => 2,
1821    'CLEAN'       => 1,
1822    'TEMPFAIL'    => 0,
1823    'OTHER'       => 0,
1824 );
1825
1826 # for reports
1827 my %ccatmajor_to_spamham = (
1828    'INFECTED'    => 'malware',
1829    'BANNED'      => 'bannedname',
1830    'UNCHECKED'   => 'unchecked',
1831    'SPAM'        => 'spam',
1832    'SPAMMY'      => 'spam',
1833    'BAD-HEADER'  => 'ham',
1834    'OVERSIZED'   => 'ham',
1835    'MTA-BLOCKED' => 'ham',
1836    'CLEAN'       => 'ham',
1837    'TEMPFAIL'    => 'ham',
1838    'OTHER'       => 'ham',
1839 );
1840
1841 my $logline_maxlen = 980;
1842
1843 # Create the list of REs against which log lines are matched.
1844 # Lines that match any of the patterns in this list are ignored.
1845 #
1846 # Note: This table is created at runtime, due to a Perl bug which
1847 # I reported as perl bug #56202:
1848 #
1849 #    http://rt.perl.org/rt3/Public/Bug/Display.html?id=56202
1850 #
1851
1852 sub create_ignore_list() {
1853    push @ignore_list_final, qr/^lookup_ip_acl/;
1854    push @ignore_list_final, qr/^lookup_acl/;
1855    push @ignore_list_final, qr/^lookup_hash/;
1856    push @ignore_list_final, qr/^lookup_re/;
1857    push @ignore_list_final, qr/^lookup_ldap/;
1858    push @ignore_list_final, qr/^lookup_sql_field.* result=[YN]$/;
1859    push @ignore_list_final, qr/^lookup .* does not match$/;
1860    push @ignore_list_final, qr/^lookup [[(]/;
1861    push @ignore_list_final, qr/^lookup => /;
1862    push @ignore_list_final, qr/^lookup: /;
1863    push @ignore_list_final, qr/^save_info_preliminary/; # log level 4
1864    push @ignore_list_final, qr/^save_info_final/;       # log level 4
1865    push @ignore_list_final, qr/^sql: /;
1866    push @ignore_list_final, qr/^sql_storage: retrying/;
1867    push @ignore_list_final, qr/^sql flush: /;
1868    push @ignore_list_final, qr/^sql print/;
1869    push @ignore_list_final, qr/^sql begin transaction/;
1870    push @ignore_list_final, qr/^sql rollback/;
1871    push @ignore_list_final, qr/^mail_via_sql: /;
1872    push @ignore_list_final, qr/^CALLING SA check$/;
1873    push @ignore_list_final, qr/^calling SA parse,/;
1874    push @ignore_list_final, qr/^timer set to \d+/;
1875    push @ignore_list_final, qr/^query_keys/;
1876    push @ignore_list_final, qr/^find_or_save_addr: /;
1877    push @ignore_list_final, qr/^header: /;
1878    push @ignore_list_final, qr/^DO_QUARANTINE, /;
1879    push @ignore_list_final, qr/^DEBUG_ONESHOT: /;
1880    push @ignore_list_final, qr/^TempDir::/;
1881    push @ignore_list_final, qr/^check_mail_begin_task: /;
1882    push @ignore_list_final, qr/^program: .*?(anomy|altermime|disclaimer).*? said: /; # log_level 2
1883    push @ignore_list_final, qr/^body (?:type|hash): /;
1884    push @ignore_list_final, qr/^\d+\.From: <.*>, \d+.Mail_From:/;
1885    push @ignore_list_final, qr/^The amavisd daemon is (?:apparently )?not running/;
1886    push @ignore_list_final, qr/^rw_loop/;
1887    push @ignore_list_final, qr/^[SL]MTP[><]/;
1888    push @ignore_list_final, qr/^[SL]MTP response for/;
1889    push @ignore_list_final, qr/^dsn:/i,   # DSN or dsn
1890    push @ignore_list_final, qr/^enqueue: /;
1891    push @ignore_list_final, qr/^write_header: /;
1892    push @ignore_list_final, qr/^banned check: /;
1893    push @ignore_list_final, qr/^child_finish_hook/;
1894    push @ignore_list_final, qr/^inspect_dsn:/;
1895    push @ignore_list_final, qr/^client IP address unknown/;
1896    push @ignore_list_final, qr/^final_destiny/;
1897    push @ignore_list_final, qr/^one_response_for_all/;
1898    push @ignore_list_final, qr/^headers CLUSTERING/;
1899    push @ignore_list_final, qr/^notif=/;
1900    push @ignore_list_final, qr/^\(about to connect/;
1901    push @ignore_list_final, qr/^Original mail size/;
1902    push @ignore_list_final, qr/^TempDir removal/;
1903    push @ignore_list_final, qr/^Issued a new file name/;
1904    push @ignore_list_final, qr/^starting banned checks/;
1905    push @ignore_list_final, qr/^skip admin notification/;
1906    push @ignore_list_final, qr/^do_notify_and_quarantine - done/;
1907    push @ignore_list_final, qr/^do_[a-zA-Z]+.* done$/i;
1908    push @ignore_list_final, qr/^Remote host presents itself as:/;
1909    push @ignore_list_final, qr/^connect_to_ldap/;
1910    push @ignore_list_final, qr/^connect_to_sql: trying /;
1911    push @ignore_list_final, qr/^ldap begin_work/;
1912    push @ignore_list_final, qr/^Connecting to LDAP server/;
1913    push @ignore_list_final, qr/^loaded base policy bank/;
1914    push @ignore_list_final, qr/^\d+\.From:/;
1915    push @ignore_list_final, qr/^Syslog (retries|warnings)/;
1916    push @ignore_list_final, qr/^smtp connection cache/;
1917    push @ignore_list_final, qr/^smtp cmd> /;
1918    push @ignore_list_final, qr/^smtp session/;
1919    push @ignore_list_final, qr/^Ignoring stale PID file/;
1920    push @ignore_list_final, qr/^mime_decode_preamble/;
1921    push @ignore_list_final, qr/^doing banned check for/;
1922    push @ignore_list_final, qr/^open_on_specific_fd/;
1923    push @ignore_list_final, qr/^reparenting /;
1924    push @ignore_list_final, qr/^Issued a new pseudo part: /;
1925    push @ignore_list_final, qr/^run_command: /;
1926    push @ignore_list_final, qr/^result line from file/;
1927    push @ignore_list_final, qr/^Charging /;
1928    push @ignore_list_final, qr/^check_for_banned /;
1929    push @ignore_list_final, qr/^Extracting mime components$/;
1930    push @ignore_list_final, qr/^response to /;
1931    push @ignore_list_final, qr/^File-type of /;
1932    push @ignore_list_final, qr/^Skip admin notification, /;
1933    push @ignore_list_final, qr/^run_av: /;
1934    push @ignore_list_final, qr/^string_to_mime_entity /;
1935    push @ignore_list_final, qr/^ndn_needed=/;
1936    push @ignore_list_final, qr/^sending RCPT TO:/;
1937    push @ignore_list_final, qr/^decode_parts: /;
1938    push @ignore_list_final, qr/^decompose_part: /;
1939    push @ignore_list_final, qr/^setting body type: /;
1940    push @ignore_list_final, qr/^mime_decode_epilogue: /;
1941    push @ignore_list_final, qr/^string_to_mime_entity: /;
1942    push @ignore_list_final, qr/^at the END handler: /;
1943    push @ignore_list_final, qr/^Amavis::.* called$/;
1944    push @ignore_list_final, qr/^Amavis::.* close,/;
1945    push @ignore_list_final, qr/^dkim: /;         # XXX provide stats
1946    push @ignore_list_final, qr/^collect banned table/;
1947    push @ignore_list_final, qr/^collect_results from/;
1948    push @ignore_list_final, qr/^blocking contents category is/;
1949    push @ignore_list_final, qr/^running file\(/;
1950    push @ignore_list_final, qr/^Found av scanner/;
1951    push @ignore_list_final, qr/^Found myself/;
1952    push @ignore_list_final, qr/^mail_via_smtp/;
1953    push @ignore_list_final, qr/^switch_to_client_time/;
1954    push @ignore_list_final, qr/^parse_message_id/;
1955    push @ignore_list_final, qr/^parse_received: /;
1956    push @ignore_list_final, qr/^parse_ip_address_from_received: /;
1957    push @ignore_list_final, qr/^fish_out_ip_from_received: /;
1958    push @ignore_list_final, qr/^Waiting for the process \S+ to terminate/;
1959    push @ignore_list_final, qr/^Valid PID file \(younger than sys uptime/;
1960    push @ignore_list_final, qr/^Sending SIG\S+ to amavisd/;
1961    push @ignore_list_final, qr/^Can't send SIG\S+ to process/;
1962    push @ignore_list_final, qr/^killing process/;
1963    push @ignore_list_final, qr/^no need to kill process/;
1964    push @ignore_list_final, qr/^process .* is still alive/;
1965    push @ignore_list_final, qr/^Daemon \[\d+\] terminated by SIG/;
1966    push @ignore_list_final, qr/^storage and lookups will use .* to SQL/;
1967    push @ignore_list_final, qr/^idle_proc, /;
1968    push @ignore_list_final, qr/^switch_to_my_time/;
1969    push @ignore_list_final, qr/^TempDir::strip: /;
1970    push @ignore_list_final, qr/^rmdir_recursively/;
1971    push @ignore_list_final, qr/^sending [SL]MTP response/;
1972    push @ignore_list_final, qr/^prolong_timer/;
1973    push @ignore_list_final, qr/^process_request:/;
1974    push @ignore_list_final, qr/^exiting process_request/;
1975    push @ignore_list_final, qr/^post_process_request_hook: /;
1976    push @ignore_list_final, qr/^SMTP session over/;
1977    push @ignore_list_final, qr/^updating snmp variables/;
1978    push @ignore_list_final, qr/^best_try_originator_ip/;
1979    push @ignore_list_final, qr/^mail checking ended: /; # log level 2
1980    push @ignore_list_final, qr/^The amavisd daemon is already running/;
1981    push @ignore_list_final, qr/^AUTH not needed/;
1982    push @ignore_list_final, qr/^load: \d+ %, total idle/;
1983    push @ignore_list_final, qr/^policy protocol: [^=]+=\S+(?:,\S+)*$/;   # allow "policy protocol: INVALID ..." later
1984    push @ignore_list_final, qr/^penpals: /;
1985    push @ignore_list_final, qr/^Not calling virus scanners, no files to scan in/;
1986    push @ignore_list_final, qr/^local delivery: /;
1987    push @ignore_list_final, qr/^run_as_subprocess: child process \S*: Broken pipe/;
1988    push @ignore_list_final, qr/^initializing Mail::SpamAssassin/;
1989    push @ignore_list_final, qr/^Error reading mail header section/;   # seems to occur gen. due to perl getline() bug
1990    push @ignore_list_final, qr/^flatten_and_tidy_dir/;
1991    push @ignore_list_final, qr/^do_7zip: member/;
1992    push @ignore_list_final, qr/^Expanding \S+ archive/;
1993    push @ignore_list_final, qr/^files_to_scan:/;
1994    push @ignore_list_final, qr/^Unzipping p\d+/;
1995    push @ignore_list_final, qr/^writing mail text to SQL/;
1996    push @ignore_list_final, qr/^strip_tempdir/;
1997    push @ignore_list_final, qr/^no parts, file/;
1998    push @ignore_list_final, qr/^warnsender_with_pass/;
1999    push @ignore_list_final, qr/^RETURNED FROM SA check/;
2000    push @ignore_list_final, qr/^mime_traverse: /;
2001    push @ignore_list_final, qr/^do_spam: /;
2002    push @ignore_list_final, qr/^prepare_tempdir: /;
2003    push @ignore_list_final, qr/^check_header: /;
2004    push @ignore_list_final, qr/^skip admin notification/;
2005    push @ignore_list_final, qr/^do_executable: not a/;
2006    push @ignore_list_final, qr/^Skip spam admin notification, no administrators$/;
2007    push @ignore_list_final, qr/^skip banned check for/;
2008    push @ignore_list_final, qr/^is_outgoing /;
2009    push @ignore_list_final, qr/^NO Disclaimer/;
2010    push @ignore_list_final, qr/^Using \(\S+\) on file/;
2011    push @ignore_list_final, qr/^no anti-spam code loaded/;
2012    push @ignore_list_final, qr/^entered child_init_hook/;
2013    push @ignore_list_final, qr/^body type/;
2014    push @ignore_list_final, qr/^establish_or_refresh/;
2015    push @ignore_list_final, qr/^get_body_digest/;
2016    push @ignore_list_final, qr/^ask_daemon_internal/;
2017    push @ignore_list_final, qr/^Turning AV infection into a spam report, name already accounted for/;
2018    push @ignore_list_final, qr/^Calling virus scanners/;
2019    push @ignore_list_final, qr/^timer stopped after /;
2020    push @ignore_list_final, qr/^virus_presence /;
2021    push @ignore_list_final, qr/^cache entry /;
2022    push @ignore_list_final, qr/^generate_mail_id /;
2023    push @ignore_list_final, qr/^Load low precedence policybank/;
2024    push @ignore_list_final, qr/^warm restart on /;              # XXX could be placed instartup info
2025    push @ignore_list_final, qr/^Signalling a SIGHUP to a running daemon/;
2026    push @ignore_list_final, qr/^Deleting db files /;
2027    push @ignore_list_final, qr/^address modified \(/;
2028    push @ignore_list_final, qr/^Request: AM\.PDP /;
2029    push @ignore_list_final, qr/^DSPAM result: /;
2030    push @ignore_list_final, qr/^bind to \//;
2031    push @ignore_list_final, qr/^ZMQ enabled: /;
2032
2033    push @ignore_list_final, qr/^Inserting header field: X-Amavis-Hold: /;
2034    push @ignore_list_final, qr/^Decoding of .* failed, leaving it unpacked: /;
2035
2036       # various forms of "Using ..."
2037       # more specific, interesting variants already captured: search "Using"
2038    push @ignore_list_final, qr/^Using \(.*\) on dir:/;
2039    push @ignore_list_final, qr/^Using [^:]+: \(built-in interface\)/;
2040    push @ignore_list_final, qr/^Using \(.*\): /;
2041    push @ignore_list_final, qr/: sleeping for /;
2042    push @ignore_list_final, qr/creating socket by /;
2043
2044         # unanchored
2045    push @ignore_list_final, qr/\bRUSAGE\b/;
2046    push @ignore_list_final, qr/: Sending .* to UNIX socket/;
2047
2048    push @ignore_list_final, qr/sd_notify \(no socket\): STATUS=Starting child process\(es\), ready for work./
2049 }
2050
2051 # Notes:
2052 #
2053 #   - IN REs, always use /o flag or qr// at end of RE when RE uses unchanging interpolated vars
2054 #   - In REs, email addresses may be empty "<>" - capture using *, not + ( eg. from=<[^>]*> )
2055 #   - See additional notes below, search for "Note:".
2056 #   - XXX indicates change, fix or more thought required
2057
2058 # Main processing loop
2059 #
2060 while (<>) {
2061    chomp;
2062    s/ +$//;
2063    next if $_ eq '';
2064
2065    $Logreporters::Reports::origline = $_;
2066
2067    if ($Opts{'standalone'}) {
2068       next unless s/^[A-Z][a-z]{2} [ \d]\d \d{2}:\d{2}:\d{2} (?:<[^>]+> )?\S+ $Opts{'syslog_name'}(?:\[\d+\])?: (?:\[ID \d+ \w+\.\w+\] )?//o;
2069    }
2070
2071    my $p1 = $_;
2072    my ($p2, $pid);
2073    my $action = "blocked";    # default action is blocked if not present in log
2074
2075    # For now, ignore the amavis startup timing lines.  Need to do this
2076    # before stripping out the amavis pid to differentiate these from the
2077    # scan timing reports
2078    next if ($p1 =~ /^TIMING/);
2079
2080    my $linelen = length $p1;
2081    # Strip amavis process id-instance id, or release id
2082    if (($pid,$p2) = ($p1 =~ /^\(([^)]+)\) (.*)$/ )) {
2083       $p1 = $p2;
2084    }
2085
2086    # Handle continuation lines.  Continuation lines should be in order per PID, meaning line1, line2, line3,
2087    # but never line3, line1, line2.
2088    #
2089    # amavis log lines as chopped by sub write_log are exactly 980 characters long starting with '(' as in:
2090    #  amavis[47061]: (47061-15) SPAM, etc  ...
2091    #                 ^ <-----980------------->
2092    # but this can be changed in amavis via $logline_maxlen.
2093    # There may also be the alert markers (!) and (!!) preceeding any continuation ellipsis.
2094    #
2095
2096    # ... a continued line ...
2097    if ($p1 =~ s/^(\([!]{1,2}\))?\.\.\.//) {
2098       if (!exists($SaveLine{$pid})) {
2099          my $alert = $1;
2100          #printf "Unexpected continue line: \"%s\"\n", $p1;
2101          $SaveLine{$pid} = $alert || '';
2102       }
2103       $SaveLine{$pid} .= $p1;
2104       next if $SaveLine{$pid} =~ s/\.\.\.$//;  # next if line has more pieces
2105    }
2106
2107    # this line continues ...
2108    if ($p1 =~ /\.\.\.$/ and $linelen == $logline_maxlen) {
2109       $p1 =~ s/\.\.\.$//;
2110       $SaveLine{$pid} = $p1;
2111       next;
2112    }
2113
2114    if (exists($SaveLine{$pid})) {
2115       # printf "END OF SaveLine: %s\n", $SaveLine{$pid};
2116       $p1 = delete $SaveLine{$pid};
2117    }
2118
2119    #if (length($p1) > 10000) {
2120    #   printf "Long log entry %d chars: \"%s\"\n", length($p1), $p1;
2121    #   next;
2122    #}
2123
2124    next if (
2125         # Place REs here that should ignore log lines otherwise caught below.
2126         # Some are located here historically, and need to be checked for candidates
2127         # to be relocated to ignore_list_final.
2128            ($p1 =~ /^do_ascii/)
2129         or ($p1 =~ /^Checking/)
2130         or ($p1 =~ /^header_edits_for_quar: /)
2131         or ($p1 =~ /^Not-Delivered/)
2132         or ($p1 =~ /^SpamControl/)
2133         or ($p1 =~ /^Perl/)
2134         or ($p1 =~ /^ESMTP/)
2135         or ($p1 =~ /^UTF8SMTP/)
2136         or ($p1 =~ /^(?:\(!+\))?(\S+ )?(?:FWD|SEND) from /)            # log level 4
2137         or ($p1 =~ /^(?:\(!+\))?(\S+ )?(?:ESMTP|FWD|SEND) via /)       # log level 4
2138         or ($p1 =~ /^tempdir being removed/)
2139         or ($p1 =~ /^do_notify_and_quar(?:antine)?: .*ccat/)
2140         or ($p1 =~ /^cached [a-zA-Z0-9]+ /)
2141         or ($p1 =~ /^loaded policy bank/)
2142         or ($p1 =~ /^p\.path/)
2143         or ($p1 =~ /^virus_scan: /)
2144         or ($p1 =~ /^Requesting (a |)process rundown after [0-9]+ tasks/)
2145         or ($p1 =~ /^Cached (virus|spam) check expired/)
2146         or ($p1 =~ /^pr(?:esent|ovid)ing full original message to scanners as/)  # log level 2
2147         or ($p1 =~ /^Actual message size [0-9]+ B(,| greater than the) declared [0-9]+ B/)
2148         or ($p1 =~ /^disabling DSN/)
2149         or ($p1 =~ /^Virus ([^,]+ )?matches [^,]+, sender addr ignored/)
2150         or ($p1 =~ /^release /)
2151         or ($p1 =~ /^adding SA score \S+ to existing/)
2152         or ($p1 =~ /^Maia:/)   # redundant
2153         or ($p1 =~ /^AM\.PDP  /)  # this appears to be always have two spaces
2154                                   # because in amavisd::preprocess_policy_query() when $ampdp is
2155                                   # set, it will pass an unset $attr_ref->{'mail_id'} to do_log(1
2156         or ($p1 =~ /^_(?:WARN|DIE):$/)  # bug: empty _WARN|_DIE: http://marc.info/?l=amavis-user&m=121725098111422&w=2
2157
2158         # non-begin anchored
2159         or ($p1 =~ /result: clean$/)
2160         or ($p1 =~ /DESTROY called$/)
2161         or ($p1 =~ /email\.txt no longer exists, can't re-use it/)
2162         or ($p1 =~ /SPAM\.TAG2/)
2163         or ($p1 =~ /BAD-HEADER\.TAG2/)
2164         or ($p1 =~ /: Connecting to socket/)
2165         or ($p1 =~ /broken pipe \(don't worry\), retrying/)
2166         or ($p1 =~ /(?:Sending|on dir:) (?:CONT)?SCAN /)
2167    );
2168
2169    my ($ip, $from, $to, $key,, $reason, $item,
2170        $decoder, $scanner, $stage, $sectkey);
2171
2172    # Coerce older "INFECTED" quarantined lines into "Blocked INFECTED",
2173    # to be processed in the Passed/Blocked section.
2174    if ($p1 =~ /^INFECTED.*, quarantine/) {
2175       $p1 = 'Blocked ' . $p1;
2176    }
2177
2178    # SPAM entry occurs at kill level
2179    # SPAM-TAG entry occurs at log level 2, when spam header is inserted
2180    # log_level >= 2 || (log_level > 2 && syslog_priority=debug)
2181    my ($tagtype,$fromto,$isspam,$tags,$tests,$autolearn);
2182
2183    # amavisd-new 2.7.0 changes SPAM-TAG to Spam-tag and its log_level to 3
2184    if (($tagtype,$fromto,$isspam,$tags,$tests,$autolearn) = ($p1 =~ /^((?i:SPAM(?:-TAG)?)), (.*), (Yes|No), score=[-+x\d.]+(.*) tests=\[([^\]]*)](?:, autolearn=(\w+))?/) or
2185        ($tagtype,$fromto,$isspam,$tags,$tests) =            ($p1 =~ /^((?i:SPAM(?:-TAG)?)), (.*), (Yes|No), hits=[-+x\d.]+(.*) tests=(.*)(?:, quarantine )?/)) {
2186
2187       #TD SPAM, <from@example.com> -> <to@sample.com>, Yes, score=17.709 tag=-10 tag2=6.31 kill=6.31 tests=[AWL=-0.678, BAYES_99=4], autolearn=spam, quarantine Cc4+GUJhgpqh (spam-quarantine)
2188       #TD SPAM, <from@example.com> -> <to@sample.net>, Yes, score=21.161 tag=x tag2=8.15 kill=8.15 tests=[BAYES_99=2.5, FORGED_RCVD_HELO=0.135], autolearn=no, quarantine m6lWPoTGJ2O (spam-quarantine)
2189       #TD SPAM, <from@example.com> -> <to@sample.net>, Yes, score=17.887 tag=-10 tag2=6.31 kill=6.31 tests=[BAYES_99=4], autolearn=spam, quarantine VFYjDOVTW4zd (spam-quarantine)
2190       #TD SPAM-TAG, <from@example.com> -> <to@sample.net>, No, score=-0.069 tagged_above=-10 required=6.31 tests=[BAYES_00=-2.599, FROM_ENDS_IN_NUMS=2.53]
2191       #TD SPAM-TAG, <from@example.com> -> <to@sample.net>, No, score=-1.294 required=8.15 tests=[BAYES_00=-2.599, FROM_LOCAL_HEX=1.305]
2192       # pre 2.3.3
2193       #TD SPAM-TAG, <from@example.com> -> <to@sample.net>, Yes, hits=6.159 tagged_above=-999 required=3.4 tests=BAYES_99=3.5, FUZZY_CPILL=0.518, HTML_MESSAGE=0.001, URIBL_WS_SURBL=2.14
2194       #TD SPAM, <from@example.com> -> <to@sample.net>, Yes, hits=8.1 tag1=-999.0 tag2=7.0 kill=7.0 tests=MANGLED_TAKE, UPPERCASE_25_50, quarantine spam-14156-09 (maia-spam-quarantine)
2195
2196       $Totals{'tagged'}++   if uc($tagtype) eq 'SPAM-TAG';
2197
2198       if ($tests) {
2199          my $type = $isspam =~ /^Y/ ? 'Spam' : 'Ham';
2200
2201          # Note: A SPAM line may be followed by an almost identical SPAM-TAG line.  To avoid double counting,
2202          # maintain a list of (abbreviated) SPAM tag lines keyed by pid.  Since pid's are recycled,
2203          # maintain an approximation of uniqueness by combining several components from the log
2204          # line (we can't use the date information, as in logwatch, it is not present).
2205          # XXX: It is safe to delete an entry when the final Passed/Block line occurs
2206
2207          #TD SPAM, <from@example.com> -> <to@sample.net>, Yes, score=34.939 tag=x tag2=6.31 kill=6.31 tests=[DATE_IN_FUTURE_03_06=1.961], autolearn=disabled
2208          #TD SPAM-TAG, <from@example.com> -> <to@sample.net>, Yes, score=34.939 required=6.31 tests=[DATE_IN_FUTURE_03_06=1.961]
2209          #TD SPAM, <from@example.com> -> tod@sample.net>, Yes, score=31.565 tag=x tag2=6.9 kill=6.9 tests=[AV:Sanesecurity.Phishing.Bank.2666.UNOFFICIAL=4.1, AV:Sanesecurity.Phishing.Bank.2666.UNOFFICIAL=4.1, BAYES_99=4, DCC_CHECK=4, DIGEST_MULTIPLE=0.001, FORGED_MUA_OUTLOOK=3.116, FORGED_OUTLOOK_HTML=0.001, FORGED_OUTLOOK_TAGS=0.001, HTML_MESSAGE=0.001, L_AV_SS_Phish=5, MIME_HTML_ONLY=1.457, NORMAL_HTTP_TO_IP=0.001, RAZOR2_CF_RANGE_51_100=2, RAZOR2_CF_RANGE_E4_51_100=1.5, RAZOR2_CF_RANGE_E8_51_100=1.5, RAZOR2_CHECK=3, RDNS_NONE=0.1, URIBL_PH_SURBL=1.787] autolearn=spam
2210
2211
2212          my $tagstr = $fromto . '/' . $isspam . '/' . $tests;
2213          if (uc($tagtype) eq 'SPAM-TAG' and exists $spamtags{$pid}) {
2214             next if ($spamtags{$pid} eq $tagstr);
2215          }
2216          $spamtags{$pid} = $tagstr;
2217
2218          #for (split /=[^,]+(?:, +|$)/, $tests)
2219          # amavis < 2.6.2 would double list AV names when using
2220          # @virus_name_to_spam_score_maps.
2221          my @unique_tests = unique_list (split /, +/, $tests);
2222          for (@unique_tests) {
2223             # skip possible trailing junk ("quarantine, ...") when older non-bracked tests=xxx is used
2224             next if ! /[^=]+=[\-.\d]+/;
2225             my ($id,$val) = split /=/;
2226             if ($id =~ /^BAYES_\d+$/) {
2227                $Counts{'bayes'}{$id}++    if ($Collecting{'bayes'});
2228             }
2229             if ($Opts{'sarules'}) {
2230                if    ($id eq 'DKIM_POLICY_SIGNSOME') { $val = 0   }
2231                elsif ($id eq 'AWL')                  { $val = '-' }
2232                $Counts{'sarules'}{$type}{sprintf "%6s %s", $val, $id}++;
2233             }
2234          }
2235          # Handled below
2236          #autolearn= is available only at ll>=3 or SPAM messages; so ham doesn't naturally occur here
2237          # SA 2.5/2.6 : ham/spam/no
2238          # SA 3.0+    : ham/spam/no/disabled failed/unavailable
2239          #$Counts{'autolearn'}{$type}{$autolearn}++    if ($Opts{'autolearn'});
2240       }
2241    }
2242
2243    # Passed or Blocked
2244    elsif ($p1 =~ /^(Passed|Blocked)(.*)/) {
2245       $action = lcfirst $1;
2246       ($p1 = $2) =~ s/^\s+//;
2247
2248       $p1 =~ s/^,/CLEAN,/;      # canonicalize older log entries
2249       #print "P1: \"$p1\"\n";
2250
2251       # amavis 20030616p10-5
2252       #TD Passed, <from@example.com> -> <to@sample.net>, Message-ID: <652.44494541@example.com>, Hits: 4.377
2253       #TD Passed, <from@example.com> -> <to@sample.net>, Message-ID: <B5C@example.com>, Hits: -
2254       #TD Passed, <from@example.com> -> <to@sample.net>, quarantine IJHkgliCm2Ia, Message-ID: <20080307140552.16E127641E@example.com>, Hits: 0.633
2255
2256       #TD Passed CLEAN, [10.0.0.1] [10.0.0.1] <from@example.com> -> <to@sample.net>, Message-ID: <2qxz191@example.com>, mail_id: w4DHD8, Hits: -2.599, size: 3045, queued_as: 2056, 2664 ms
2257       #TD Passed CLEAN, [10.0.0.1] [10.0.0.1] <from@example.com> -> <to@sample.net>, Message-ID: <2qxz191@example.com>, mail_id: w4DHD8, Hits: -2.541-3, size: 3045, queued_as: 2056, 2664 ms
2258       #TD Blocked SPAM, [10.0.0.1] [192.168.0.1] <bogus@example.com> -> <to@sample.net>, quarantine: spam-EzEbE9W, Message-ID: <117894@example.com>, mail_id: EzEbE9W, Hits: 6.364, size: 16493, 6292 ms
2259       #TD Blocked SPAM, LOCAL [10.0.0.1] [10.0.0.2] <bogus@example.com> -> <to@sample.net>, quarantine: spam-EzEbE9W, Message-ID: <110394@example.com>, mail_id: EzEbE9W, Hits: 6.364, size: 16493, 6292 ms
2260       #TD Blocked SPAM, [IPv6:2001:630:d0:f102:230:48ff:fe77:96e] [192.168.0.1] <joe@example.com> -> <user@sample.net>, quarantine: spam-EzEbE9W, Message-ID: <11780394@example.com>, mail_id: EzEbE9W, Hits: 6.364, size: 16493, 6292 ms
2261       #TD Passed SPAMMY, ORIGINATING/MYNETS LOCAL [10.0.0.1] [10.0.0.1] <from@example.com> -> <to1@sample.net>,<to2@sample.net>, quarantine: spam-EzEbE9W, Message-ID: <11780394@example.com>, mail_id: EzEbE9W, Hits: 6.364, size: 16493, 6292 ms
2262       #TD Blocked SPAM, B-BANK/C-BANK/B-BANK [10.0.0.1] [10.0.0.1] <from@sample.net> -> <to@example.com>, quarantine: spam-EzEbE9W, Message-ID: <11780394@example.com>, mail_id: EzEbE9W, Hits: 6.364, size: 16493, 6292 ms
2263       #TD Blocked SPAM, [10.0.0.1] [10.0.0.1] <from@example.com> -> <to@sample.net>, quarantine: spam-AV49p5, Message-ID: <1.007@sample.net>, mail_id: AV49p5, Hits: 7.487, size: 27174, 4406 ms
2264       #TD Passed SPAM, MYNETS <root@example.com> -> <root@example.com>, quarantine: spam-V3Wq, Message-ID: <220.1B@example.com>, mail_id: V3Wq, Hits: 7, size: 8838, queued_as: C63EC, 18 ms
2265       #TD Passed SPAM, <> -> <"fred).flintstone"@domain.tld>, Message-ID: <200801180104.CAA23669@aserver.sub.adomain.tld>, mail_id: 6AzQ1g0l5RgP, Hits: 9.061, size: 5555, queued_as: C1840506CB8, 8766 ms
2266       #TD Blocked INFECTED (HTML.Phishing.Bank-43), [198.168.0.1] [10.0.0.1] <bogus@example.com> -> <to@sample.net>, quarantine: virus-SCwJcs, Message-ID: <509@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2267       #TD Blocked INFECTED (Trojan.Downloader.Small-9993), LOCAL [10.0.0.2] [10.0.0.2] <bogus@example.net> -> <to@example.com>, quarantine: virus-SCwJcs, Message-ID: <9009@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2268       #TD Blocked BANNED (multipart/report | message/partial,.txt), [192.168.0.1] [10.0.0.2] <> -> <someuser@sample.net>, quarantine: virus-SCwJcs, Message-ID: <509@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2269       #TD Blocked BANNED (multipart/report | message/partial,.txt), LOCAL [192.168.0.1] [10.0.0.2] <> -> <someuser@sample.net>, quarantine: virus-SCwJcs, Message-ID: <509@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2270       #TD Blocked BANNED (multipart/mixed | application/octet-stream,.asc,=?iso-8859-1?Q?FTP=5FFile=5F (1)=File(1).reg), [192.168.0.0] [192.168.0.0] <from@example.com> -> <to@sample.us>, quarantine: virus-SCwJcs, Message-ID: <509@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2271       #TD Blocked BANNED (multipart/related | application/zip,.zip,card.zip | .exe,.exe-ms,Card.exe), [10.0.0.2] [10.0.0.2] <from@example.com> -> <to@sample.net>, quarantine: banned-9OXm4Q3ah, Message-ID: <08517$@from>, mail_id: 9OXm4Q3ah, Hits: -, size: 2366, 3803 ms
2272       #TD Passed BAD-HEADER, [192.168.0.1] [10.0.0.2] <bogus@example.com> -> <someuser@sample.net>, quarantine: virus-SCwJcs, Message-ID: <df@acm.org>, mail_id: SCwJcs, Hits: 2.54 size: 4134, 3721 ms
2273       #TD Passed BAD-HEADER, LOCAL [192.168.0.1] [10.0.0.2] <bogus@example.com> -> <someuser@sample.net>, quarantine: virus-SCwJcs, Message-ID: <df@acm.org>, mail_id: SCwJcs, Hits: 3.2 size: 4134, 3721 ms
2274       #TD Passed BAD-HEADER, MYNETS AM.PDP [127.0.0.1] [127.0.0.1] <bogus@example.com> -> <someuser@sample.net>, quarantine: virus-SCwJcs, Message-ID: <df@acm.org>, mail_id: SCwJcs, Hits: 1.2 size: 4134, 3721 ms
2275       #TD Passed BAD-HEADER, ORIGINATING/MYNETS LOCAL [10.0.0.1] [10.0.0.1] <from@sample.net> -> <to1@sample.net>,<to2@sample.net>,<to3@example.com>, quarantine: virus-SCwJcs, Message-ID: <df@acm.org>, mail_id: SCwJcs, Hits: -, size: 4134, 3721 ms
2276       #TD Passed BAD-HEADER, [10.0.0.1] [10.0.0.2] <from@example.com> -> <to@sample.net>, quarantine: badh-lxR, Message-ID: <7fm@example.com>, mail_id: lxR, Hits: -2.292, size: 422, queued_as: E3B, 981 ms
2277       #TD Passed UNCHECKED, MYNETS LOCAL [192.168.0.1] [192.168.0.1] <from@sample.net> -> <to@example.com> Message-ID: <002e01c759c7$5de437b0$0a02a8c0@somehost>, mail_id: 7vtR-7BAvHZV, Hits: -, queued_as: B5420C2E10, 6585 ms
2278       #TD Blocked MTA-BLOCKED, LOCAL [192.168.0.1] [192.168.0.2] <from@example.com> -> <to@sample.net>, Message-ID: <438548@example.com>, mail_id: tfgTCiyvFw, Hits: -2.54, size: 4895, 31758 ms
2279       #TD Blocked OVERSIZED, LOCAL [10.0.0.1] [10.0.0.1] <f@example.com> -> <t@sample.net>, Message-ID: <435@example.com>, mail_id: tfTivFw, Hits: -2.54, size: 444444895, 31758 ms
2280       #TD Blocked OTHER, LOCAL [10.0.0.1] [10.0.0.1] <f@example.com> -> <t@sample.net>, Message-ID: <435@example.com>, mail_id: tfTivFw, Hits: -2.54, size: 495, 31758 ms
2281       #TD Blocked TEMPFAIL, [10.0.0.2] [10.0.0.1] <user@example.com> -> <to@sample.net>, Message-ID: <200703302301.9f1899470@example.com>, mail_id: bgf52ZCNbPo, Hits: -2.586, 3908 ms
2282
2283       #2.3.1
2284       #<>,<info@example.com>,Passed,Hits=-3.3,Message-ID=<200506440.1.sample.net>,Size=51458
2285       #20030616p10-5
2286       #Not-Delivered, <from@example.com> -> <to@localhost>, quarantine spam-ea32770-03, Message-ID: <BAA618FE2CB585@localhost>, Hits: 9.687
2287
2288       # malwarepassed, malwareblocked
2289       # xxx very old
2290       # Virus found - quarantined|
2291       #amavisd-new-20030616
2292       # INFECTED (JS/IllWill-A), <from@[127.0.0.1]> -> <to@sample.net>, quarantine virus-20040811-207-0-03, Message-ID: <0440.5577-101@sample.net>, Hits: -
2293       # INFECTED (Exploit.HTML.IFrame, Worm.SomeFool.P), <from@sample.net> -> <to@example.com>,<to2@example.com>, quarantine qiO2ZG4K, Message-ID: <200608.5A5@mail.example.com>, Hits: -
2294       #XXX (?:(Passed|Blocked) )?INFECTED \(([^\)]+)\),[A-Z .]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [<(]([^>)]*)[>)] -> [(<]([^(<]+)[)>]/o ))
2295       #XXX elsif (($action, $key, $ip, $from, $to) = ( $p1 =~ /^(?:Virus found - quarantined|(?:(Passed|Blocked) )?INFECTED) \(([^\)]+)\),[A-Z .]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [<(]([^>)]*)[>)] -> [(<]([^(<]+)[(>]/o ))
2296
2297       # the first IP is the envelope sender.
2298       if ($p1 !~ /^(CLEAN|SPAM(?:MY)?|INFECTED \(.*?\)|BANNED \(.*?\)|BAD-HEADER(?:-\d)?|UNCHECKED|MTA-BLOCKED|OVERSIZED|OTHER|TEMPFAIL)(?: \{[^}]+})?, ([^[]+ )?(?:([^<]+) )?[<(](.*?)[>)] -> ([(<].*?[)>]), (?:.*Hits: ([-+.\d]+))(?:.* size: (\d+))?(?:.* autolearn=(\w+))?/) {
2299          inc_unmatched('passblock');
2300          next;
2301       }
2302       my $trigger;
2303       my ($ccatmajor, $pbanks, $ips, $from, $reciplist, $hits, $size, $autolearn) = ($1, $2, $3, $4, $5, $6, $7, $8);
2304
2305       $Totals{'bytesscanned'} += $size  if defined $size;
2306
2307       #print "ccatmajor: \"$ccatmajor\", pbanks: \"$pbanks\"\n";
2308       if ($ccatmajor =~ /^(INFECTED|BANNED) \((.*)\)$/) {
2309          ($ccatmajor, $trigger) = ($1, $2);
2310          #print "\tccatmajor: \"$ccatmajor\", trigger: \"$trigger\"\n";
2311       }
2312
2313       $ccatmajor =~ s/(BAD-HEADER)-\d/$1/; # strip amavis 2.7's [:ccat|minor] BAD-HEADER sub-classification
2314       $sectkey = $ccatmajor_to_sectkey{$ccatmajor} . $action;
2315       $Totals{$sectkey}++;
2316
2317       # Not checked by spamassassin, due to $sa_mail_body_size_limit or @bypass_spam_checks_maps
2318       if ($hits eq '-') {
2319          # Don't increment sabypassed for INFECTED (SA intentionally not called)
2320          unless ($ccatmajor eq 'INFECTED') {
2321             # The following order is used, the first condition met decides the outcome:
2322             #  1. a virus is detected: mail is considered infected;
2323             #  2. contains banned name or type: mail is considered banned;
2324             #  3. spam level is above kill level for at least one recipient, or a sender is blacklisted: mail is considered spam;
2325             #  4. bad (invalid) headers: mail is considered as having a bad header.
2326             # Priority: VIRUS BANNED UNCHECKED SPAM SPAMMY BADH OVERSIZED MTA CLEAN
2327             $Totals{'sabypassed'}++;
2328          }
2329       } else {
2330          if ($Collecting{'spamscores'}) {
2331             no re 'taint';
2332             if ($hits =~ /^(-?[.\d]+)([-+])([.\d]+)$/) {
2333                $hits = eval $1.$2.$3;   # untaint $hits, to sum $1 and $3 values
2334             }
2335             # SA not called for ccats INFECTED and BANNED (Hits: -).
2336             # UNCHECKED may have a score, so we can't distinguish Ham from Spam
2337             push @{$SpamScores{$ccatmajor_to_spamham{$ccatmajor}}}, $hits;
2338          }
2339       }
2340
2341       # autolearn is available here only if enabled in amavis template
2342       if ($autolearn ne '' and $Opts{'autolearn'}) {
2343       #if ($autolearn ne '' and ($ccatmajor eq 'SPAM' or $ccatmajor eq 'CLEAN')) {
2344          #  SA 2.5/2.6 : ham/spam/no
2345          #  SA 3.0+    : ham/spam/no/disabled/failed/unavailable
2346          # printf "INC: autolearn: %s, %s: %d\n", $ccatmajor eq 'SPAM' ? 'Spam' : 'Ham', $autolearn, $Opts{'autolearn'};;
2347          # Priorities other than SPAM will be considered HAM for autolearn stats
2348          $Counts{'autolearn'}{$ccatmajor eq 'SPAM' ? 'Spam' : 'Ham'}{$autolearn}++;
2349       }
2350
2351       # p0f fingerprinting
2352       if (exists $p0ftags{$pid}) {
2353          my ($ip,$score,$os) = split(/\//, $p0ftags{$pid});
2354          $Counts{'p0f'}{ucfirst($ccatmajor_to_spamham{$ccatmajor})}{$os}{$ip}++;
2355          #print "Deleting p0ftag: $pid\n";
2356          delete $p0ftags{$pid};
2357       }
2358
2359       next unless ($Collecting{$sectkey});
2360       # cleanpassed never gets here...
2361
2362       # prefer xforward IP if it exists
2363       # $ip_a => %a  original SMTP session client IP address (empty if unknown, e.g. no XFORWARD)
2364       # $ip_e => %e  best guess of the originator IP address collected from the Received trace
2365       my ($ip_a, $ip_e) = split(/ /, $ips, 2);
2366
2367       $ip = $ip_a ? $ip_a : $ip_e;
2368       $ip =~ s/[[\]]//g;
2369       #print "ip: \"$ip\", ip_a: \"$ip_a\", ip_e: \"$ip_e\", from: \"$from\", reciplist: \"$reciplist\"; hits: \"$hits\"\n";
2370       $ip   = '*unknown IP'  if ($ip   eq '');
2371       $from = '<>'           if ($from eq '');
2372
2373       # Show first recipient only, or all
2374       my @recips = split /,/, $reciplist;
2375       @recips = map { /^<(.+)>$/ } @recips;
2376       # show only first recipient
2377       $to = lc ($Opts{'first_recip_only'} ? $recips[0] : "@recips");
2378
2379       if ($ccatmajor eq 'INFECTED') {        # $ccatmajor: INFECTED  malwarepassed, malwareblocked
2380          $Counts{$sectkey}{$trigger}{$to}{$ip}{$from}++;
2381       }
2382       elsif ($ccatmajor eq 'BANNED') {       # $ccatmajor: BANNED  bannednamepassed, bannednameblocked
2383          $Counts{$sectkey}{$to}{$trigger}{$ip}{$from}++;
2384       } else {
2385          # $ccatmajor: CLEAN | SPAM{MY} | BAD-HEADER | UNCHECKED | MTA-BLOCKED | OVERSIZED | OTHER | TEMPFAIL
2386          # cleanpassed, cleanblocked, spampassed, spamblocked, badheaderpassed, badheaderblocked
2387          # uncheckedpassed, uncheckblocked, mtapassed, mtablocked, oversizedpassed, oversizedblocked
2388          # otherpassed, otherblocked, tempfailpassed, tempfailblocked
2389          $Counts{$sectkey}{$to}{$ip}{$from}++;
2390       }
2391
2392       # old...
2393       #XXX elsif (($action, $item, $ip, $from, $to) = ( $p1 =~ /^(?:(Blocked|Passed) )?BANNED (?:name\/type )?\((.+)\),[^[]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [<(]([^>)]*)[>)] -> [(<]([^(<]+)[(>]/o))
2394       #XXXX  elsif (($action, $ip, $from, $to) = ( $p1 =~ /^(?:(Passed|Blocked) )?UNCHECKED,[^[]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [<(]([^>)]*)[>)] -> [(<]([^>)]*)[)>]/o ))
2395       #XXX elsif (($action, $ip, $from, $to) = ( $p1 =~ /^(?:(Passed|Blocked) )?TEMPFAIL,[^[]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [<(]([^>)]*)[>)] -> [(<]([^>)]*)[)>]/o ))
2396       #XXX elsif (($action, $ip, $from, $to) = ( $p1 =~ /^(?:(Blocked|Passed) )?BAD-HEADER,[^[]*(?: \[($re_IP)\])?(?: \[$re_IP\])* [(<]([^>)]*)[)>](?: -> [(<]([^>)]+)[)>])[^:]*/o ))
2397       # amavis 2.3.1
2398       #BAD-HEADER, <> -> <info@example.com>, Message-ID: <200506440.1.sample.net>, Hits=-3.3 tag1=3.0 tag2=7.5 kill=7.5, tests=ALL_TRUSTED=-3.3, [10.0.0.1]
2399    } # end Passed or Blocked
2400
2401    # MAIA
2402    elsif ($p1 =~ /^FAKE SENDER, ([^:]+): ($[^,]+), (.*)$/o) {
2403       #TD FAKE SENDER, SPAM: 192.168.0.1, bogus@example.com
2404       $Totals{'fakesender'}++;            next unless ($Collecting{'fakesender'});
2405       $Counts{'fakesender'}{$1}{$2}{$3}++;
2406    }
2407
2408    elsif ($p1 =~ /^p\d+ \d+(?:\/\d+)* Content-Type: ([^,]+)(?:, size: [^,]+, name: (.*))?/) {
2409       my ($ts, $name) = ($1, $2);
2410       #TD p006 1 Content-Type: multipart/mixed
2411       #TD p008 1/1 Content-Type: multipart/signed
2412       #TD p001 1/1/1 Content-Type: text/plain, size: 460 B, name:
2413       #TD p002 1/1/2 Content-Type: application/pgp-signature, size: 189 B, name:
2414       #TD p002 1/2 Content-Type: application/octet-stream, size: 3045836 B, name: abc.pdf
2415       next unless ($Collecting{'contenttype'});
2416       my ($type, $subtype) = $ts !~ '""' ? split /\//, $ts : ('unspecified', 'unspecified');
2417
2418       $name = '' if !defined $name or $name =~ /^\s*$/;
2419       $Counts{'contenttype'}{$type}{$subtype}{$name}++;
2420    }
2421
2422    # LMTP/SMTP connection
2423    # NOTE:  no longer used. size data now being obtained from Passed/Block line, as size info may not be available here
2424    #elsif (my ($size) = ($p1 =~ /^[LS]MTP:(?:\[$re_IP\])?:\d+ [^:]+: [<(](?:.*?)[>)] -> \S+ (?:SIZE=(\d+))?.*?Received: / )) {
2425    elsif ($p1 =~ /^[LS]MTP:/) {
2426      #TD LMTP::10024 /var/spool/amavis/tmp/amavis-20070119T144757-09086: <from@example.com> -> <to@sample.net> SIZE=1000 Received: from mail.sample.net ([127.0.0.1]) by localhost (mail.sample.net [127.0.0.1]) (amavisd-new, port 10024) with LMTP for <to@sample.net>; Fri, 19 Jan 2007 15:41:45 -0800 (PST)
2427      #TD SMTP:[127.0.0.1]:10024 /var/spool/amavis/tmp/amavis-20070119T144757-09086: <from@example.com> -> <to@sample.net>,<recip@sample.net> SIZE=2500000 Received: from mail.sample.net ([127.0.0.1]) by localhost (mail.sample.net [127.0.0.1]) (amavisd-new, port 10024) with LMTP for <to@sample.net>; Fri, 19 Jan 2007 15:41:45 -0800 (PST)
2428      #TD SMTP::10024 /var/lib/amavis/tmp/amavis-27-26927: <from@example.com> -> <to@example.net> Received: from localhost ([127.0.0.1]) by localhost (example.com [127.0.0.1]) (amavisd-new, port 10024) with SMTP for <to@example.net>; Sat,  7 Jun 2008 23:09:34 +0200 (CEST)
2429      #$Totals{'bytesscanned'} += $size  if defined $size;
2430    }
2431
2432    #(\S+) ([^[(]+)(.*)$
2433    elsif ($p1 =~ /^OS_fingerprint: (\S+) ([-\d.]+) (\S+)(?: ([^[(]+|\[[^]]+\]))?/o) {
2434       #TD OS_fingerprint: 213.193.24.113 29.789 Linux 2.6 (newer, 1) (up: 1812 hrs), (distance 14, link: ethernet/modem)
2435       #TD OS_fingerprint: 10.47.2.155 -1.312 MYNETWORKS
2436       # Note: safe to delete entry when the final Passed/Block line occurs
2437       if ($Collecting{'p0f'}) {
2438          my ($genre,$vers) = ($3,$4);
2439          #print "p0f:\t$3\t\t$vers\n";
2440          if ($genre eq 'Windows') {
2441             local($1);
2442             $vers = $1  if $vers =~ /^(\S+) /;
2443             $genre .= ' ' . $vers;
2444          }
2445          elsif ($genre eq 'UNKNOWN') {
2446             $genre = 'Unknown';
2447          }
2448          $p0ftags{$pid} = join('/', $1,$2,$genre);
2449          #print "Added PID: $pid, $p0ftags{$pid}\n";
2450       }
2451    }
2452
2453    elsif ( ($reason) = ( $p1 =~ /^BAD HEADER from [^:]+: (.+)$/) or
2454            ($reason) = ( $p1 =~ /check_header: \d, (.+)$/)) {
2455       # When log_level > 1, provide additional header or MIME violations
2456
2457       # amavisd < 2.4.0, log_level >= 1
2458       #TD BAD HEADER from <bogus@example.com>: Improper use of control character (char 0D hex) in message header 'Received': Received: example.com[10.0.0.1\r]
2459       #TD BAD HEADER from <bogus@example.com>: Non-encoded 8-bit data (char F7 hex) in message header 'Subject': Subject: \367\345\370\361 \344\351\351\362\345\365\n
2460       #TD BAD HEADER from <bogus@example.com>: MIME error: error: part did not end with expected boundary
2461       #TD BAD HEADER from (bulk ) <bogus@bounces@lists.example.com>: Non-encoded 8-bit data (char E6 hex) in message header 'Subject': Subject: spam\\346ham\\n
2462       #TD BAD HEADER from (list) <bogus@bounces@lists.example.com>: MIME error: error: part did not end with expected boundary
2463       #  amavisd >= 2.4.3, log_level >= 2
2464       #TD check_header: 2, Non-encoded 8-bit data (char AE hex): Subject: RegionsNet\\256 Online Banking\\n
2465       #TD check_header: 2, Non-encoded 8-bit data (char E1 hex): From: "any user" <from\\341k@example.com>\\n
2466       #TD check_header: 3, Improper use of control character (char 0D hex): Content-type: text/html; charset=i...
2467       #TD check_header: 8, Duplicate header field: "Reply-To"
2468       #TD check_header: 8, Duplicate header field: "Subject"
2469       #TD check_header: 4, Improper folded header field made up entirely of whitespace (char 09 hex): X-Loop-Detect: 3\\n\\t\\n
2470       #TD check_header: 4, Improper folded header field made up entirely of whitespace: Received: ...8 ;         Thu, 10 Jan 2008 03:41:35 +0100\\n\\t \\n
2471
2472
2473       my $subreason;
2474       if ($reason =~ /^(.*?) \((char \S+ hex)\)(.*)$/) {
2475          $reason = $1;
2476          my ($char,$sub) = ($2,$3);
2477
2478          $sub =~ s/^in message header '[^:]+': //;
2479          $sub =~ s/^: //;
2480          $subreason = "$char: $sub";
2481       }
2482       elsif ($reason =~ /^(Improper folded header field made up entirely of whitespace):? (.*)/) {
2483          $reason = $1;
2484          $subreason = $2;
2485       }
2486       elsif ($reason =~ /^(Duplicate header field): "(.+)"$/) {
2487          $reason = $1;
2488          $subreason = $2;
2489       }
2490       elsif ($reason =~ /^(MIME error): (?:error: )?(.+)$/) {
2491          $reason = $1;
2492          $subreason = $2;
2493       }
2494
2495       $Totals{'badheadersupp'}++;            next unless ($Collecting{'badheadersupp'});
2496       $Counts{'badheadersupp'}{$reason}{$subreason}++;
2497    }
2498
2499    elsif ($p1 =~ /^truncating a message passed to SA at/) {
2500       #TD truncating a message passed to SA at 431018 bytes, orig 1875912
2501       $Totals{'truncatedmsg'}++;
2502    }
2503
2504    elsif ($p1 =~ /: spam level exceeds quarantine cutoff level/ or
2505           $p1 =~ /: cutoff, blacklisted/) {
2506       #TD do_notify_and_quarantine: spam level exceeds quarantine cutoff level 20
2507       #TD do_notify_and_quarantine: cutoff, blacklisted
2508       $Totals{'spamdiscarded'}++;
2509    }
2510
2511    elsif ( $p1 =~ /^spam_scan: (.*)$/) {
2512       #if ($1 =~ /^not wasting time on SA, message longer than/ ) {
2513          #TD spam_scan: not wasting time on SA, message longer than 409600 bytes: 1326+4115601
2514          # this causes duplicate counts, and the subsequent Passed/Blocked log line
2515          # will have "Hits: -," whereby sabypassed is incremented.
2516          #$Totals{'sabypassed'}++;
2517       #}
2518       # ignore other spam_scan lines
2519    }
2520
2521    # WARN:
2522    elsif ( ($reason) = ( $p1 =~ /^WARN: MIME::Parser error: (.*)$/ )) {
2523       # WARN: MIME::Parser error: unexpected end of header
2524       $Totals{'mimeerror'}++;                next unless ($Collecting{'mimeerror'});
2525       $Counts{'mimeerror'}{$reason}++;
2526    }
2527
2528    elsif ($p1 =~ /^WARN: address modified \((\w+)\): <(.*?)> -> <(.*)>$/) {
2529       #TD WARN: address modified (sender): <root> -> <root@>
2530       #TD WARN: address modified (recip): <root> -> <root@>
2531       #TD WARN: address modified (recip): <postmaster> -> <postmaster@>
2532       #TD WARN: address modified (recip): <"test@example.com"@> -> <"teszt@example.com">
2533       #TD WARN: address modified (sender): <fr\344om@sample.net> -> <"fr\344om"@sample.net>
2534       $Totals{'warningaddressmodified'}++;   next unless ($Collecting{'warningaddressmodified'});
2535       $Counts{'warningaddressmodified'}{$1 eq 'sender' ? "Sender address" : "Recipient address"}{"$2 -> $3"}++;
2536    }
2537
2538    # NOTICE:
2539    elsif ($p1 =~ /^NOTICE: (.*)$/) {
2540       # uninteresting
2541       #TD NOTICE: reconnecting in response to: err=2006, HY000, DBD::mysql::st execute failed: MySQL server has gone away at (eval 71) line 166, <GEN168> line 4.
2542       next if ($1 =~ /^Disconnected from SQL server/); # redundant
2543       next if ($1 =~ /^do_search: trying again: LDAP_OPERATIONS_ERROR/);
2544       next if ($1 =~ /^reconnecting in response to: /);
2545
2546
2547       if ($1 =~ /^Not sending DSN, spam level ([\d.]+ )?exceeds DSN cutoff level/) {
2548          #TD NOTICE: Not sending DSN, spam level exceeds DSN cutoff level for all recips, mail intentionally dropped
2549          $Totals{'dsnsuppressed'}++;
2550          $Counts{'dsnsuppressed'}{'DSN cutoff exceeded'}++;
2551       }
2552       elsif ($1 =~ /^Not sending DSN to believed-to-be-faked sender/) {
2553          #TD NOTICE: Not sending DSN to believed-to-be-faked sender <user@example.com>, mail containing VIRUS intentionally dropped
2554          $Totals{'dsnsuppressed'}++;
2555          $Counts{'dsnsuppressed'}{'Sender likely faked'}++;
2556       }
2557       elsif ($1 =~ /^DSN contains [^;]+; bounce is not bounc[ai]ble, mail intentionally dropped/) {
2558          $Totals{'dsnsuppressed'}++;
2559          $Counts{'dsnsuppressed'}{'Not bounceable'}++;
2560       }
2561       elsif ($1 =~ /^UNABLE TO SEND DSN to /) {
2562          #TD NOTICE: UNABLE TO SEND DSN to <user@example.com>: 554 5.7.1 Failed, id=19838-01, from MTA([127.0.0.1]:10025): 554 5.7.1 <user@example.com>: Recipient address rejected: Access denied
2563          $Totals{'dsnsuppressed'}++;
2564          $Counts{'dsnsuppressed'}{'Unable to send'}++;
2565       }
2566
2567       elsif ($1 =~ /^Skipping (?:bad|extra) output from file\(1\)/) {
2568          #TD NOTICE: Skipping extra output from file(1): blah
2569          #TD NOTICE: Skipping bad output from file(1) at [1, p002], got: blah
2570          $Totals{'fileoutputskipped'}++;
2571       }
2572       elsif (($p1) = ($1 =~ /^Virus scanning skipped: (.*)$/)) {
2573          #TD NOTICE: Virus scanning skipped: Maximum number of files (1500) exceeded at (eval 57) line 1283, <GEN212> line 1501.
2574          $Totals{'virusscanskipped'}++;      next unless ($Collecting{'virusscanskipped'});
2575          $Counts{'virusscanskipped'}{strip_trace($p1)}++;
2576       }
2577       else {
2578          inc_unmatched('NOTICE');
2579          next;
2580       }
2581    }
2582
2583    # INFO:
2584    elsif ($p1 =~ /^INFO: (.*)$/) {
2585       next if ($1 =~ /^unfolded \d+ illegal all-whitespace continuation line/);
2586       next if ($1 =~ /^removed bare CR/);
2587
2588       if ($1 =~ /^truncat(ed|ing)/) {
2589          #TD INFO: truncating long header field (len=2639): X-Spam-Report: =?iso-8859-1?Q?=0A=0A*__1=2E7_SUBJECT=5FENCODED=5FTWICE_Subject=3A_MIME_e?= =?iso-885...
2590          #TD INFO: truncated 1 header line(s) longer than 998 characters
2591          $Totals{'truncatedheader'}++;
2592       } elsif ( $1 =~ /^no existing header field 'Subject', inserting it/) {
2593          $Totals{'nosubject'}++;
2594       }
2595       elsif (my ($savers1, $savers2, $item) = ( $1 =~ /^(?:SA version: ([^,]+), ([^,]+), )?no optional modules: (.+)$/)) {
2596          #TD INFO: SA version: 3.1.8, 3.001008, no optional modules: DBD::mysql Mail::SpamAssassin::Plugin::DKIM Mail::SpamAssassin::Plugin::URIDetail Error
2597          next unless ($Opts{'startinfo'});
2598          if ($savers1 ne '') {
2599             $StartInfo{'sa_version'} = "$savers1 ($savers2)";
2600          }
2601          foreach my $code (split / /, $item) {
2602             $StartInfo{'Code'}{'Not loaded'}{$code} = "";
2603          }
2604       }
2605       elsif (my ($name) = ( $1 =~ /^(unknown banned table name \S+), .+$/)) {
2606          #TD INFO: unknown banned table name 1, recip=r@example.com
2607          $Totals{'warning'}++;      next unless ($Collecting{'warning'});
2608          $Counts{'warning'}{ucfirst $name}++;
2609       }
2610       else {
2611          inc_unmatched('INFO');
2612          next;
2613       }
2614    }
2615
2616    elsif ( ($action,$reason,$from,$to) = ($p1 =~ /^DSN: NOTIFICATION: Action:([^,]+), ([^,]+), <(.*?)> -> <(.*?)>/)) {
2617       #TD DSN: NOTIFICATION: Action:failed, LOCAL 554 Banned, <from@example.net> -> <to@example.com>
2618       #TD DSN: NOTIFICATION: Action:delayed, LOCAL 454 Banned, <from@example.com> -> <to@example.net>
2619
2620       $Totals{'dsnnotification'}++;    next unless ($Collecting{'dsnnotification'});
2621       $Counts{'dsnnotification'}{$action}{$reason}{"$from -> $to"}++;
2622    }
2623
2624    elsif (($item, $from, $to) = ( $p1 =~ /^Quarantined message release(?: \([^)]+\))?: ([^ ]+) <(.*?)> -> (.+)$/) or
2625           ($item, $from, $to) = ( $p1 =~ /^Quarantine release ([^ ]+): overriding recips <([^>]*)> by (.+)$/)) {
2626       #TD Quarantine release arQcr95dNHaW: overriding recips <TO@EXAMPLE.COM> by <to@example.com>
2627       #TD Quarantined message release: hiyPJOsD2m9Z <from@sample.net> -> <to@example.com>
2628       #TD Quarantined message release: hiyPJOsD2m9Z <> -> <to@recipient.maildir>,<anyone@example.com>
2629       # 2.6+
2630       #TD Quarantined message release (miscategorized): Iu6+0u1voOA <from@example.com> -> <to@example.net>
2631       $Totals{'released'}++;           next unless ($Collecting{'released'});
2632       $from = '<>' if ($from eq '');
2633       $to =~ s/[<>]//g;
2634       $Counts{'released'}{"\L$from"}{$to}{$item}++;
2635    }
2636    elsif ($p1 =~ /^Quarantine release ([^:]+): missing X-Quarantine-ID$/) {
2637       #TD Quarantine release 7ejEBC7MThSc: missing X-Quarantine-ID
2638       $Totals{'warningnoquarantineid'}++; next unless ($Collecting{'warningnoquarantineid'});
2639       $Counts{'warningnoquarantineid'}{$1}++;
2640    }
2641
2642    elsif ( ($stage,$reason) = ($p1 =~ /^Negative SMTP resp\S* +to ([^:]+): *(.*)$/)) {
2643       #TD Negative SMTP response to data-dot (<u@example.com>): 550 5.7.1 Header Spam Rule 4
2644       $Totals{'smtpresponse'}++;       next unless ($Collecting{'smtpresponse'});
2645       $Counts{'smtpresponse'}{'Negative response'}{$stage}{$reason}++;
2646    }
2647    elsif ( ($stage,$reason) = ($p1 =~ /^smtp resp to ([^:]+): *(.*)$/)) {
2648       #TD smtp resp to NOOP (idle 4799.4 s): 421 4.4.2 nops.overtops.org Error: timeout exceeded
2649       #TD smtp resp to MAIL (pip): 250 2.1.0 Ok
2650       $Totals{'smtpresponse'}++;       next unless ($Collecting{'smtpresponse'});
2651       $stage =~ s/ [\d.]+ s//;
2652       $Counts{'smtpresponse'}{'Response'}{$stage}{$reason}++;
2653    }
2654
2655    elsif ( ($item) = ($p1 =~ /^response to RCPT TO for <([^>]*)>: "501 Bad address syntax"/)) {
2656       #TD response to RCPT TO for <""@example.com>: "501 Bad address syntax"
2657       $Totals{'badaddress'}++;         next unless ($Collecting{'badaddress'});
2658       $Counts{'badaddress'}{$item}++;
2659    }
2660
2661    # do_unip: archive extraction
2662    elsif ($p1 =~ s/^do_unzip: \S+, //) {
2663       $Totals{'archiveextract'}++;     next unless ($Collecting{'archiveextract'});
2664
2665       if ( $p1 =~ s/^\d+ members are encrypted, //) {
2666          #TD do_unzip: p003, 4 members are encrypted, none extracted, archive retained
2667          $Counts{'archiveextract'}{'Encrypted'}{$p1}++;
2668
2669       } elsif ( $p1 =~ /^zero length members, archive retained/) {
2670          #TD do_unzip: p002, zero length members, archive retained
2671          $Counts{'archiveextract'}{'Empty member'}{''}++;
2672
2673       } elsif ($p1 =~ s/^unsupported compr\. method: //) {
2674          #TD do_unzip: p003, unsupported compr. method: 99
2675          $Counts{'archiveextract'}{'Unsupported compression'}{$p1}++;
2676       }
2677       else {
2678          $Counts{'archiveextract'}{'*unknown'}{$p1}++;
2679       }
2680    }
2681
2682    # do_cabextract: archive extraction
2683    elsif ($p1 =~ s/^do_cabextract: //) {
2684       #TD do_cabextract: can't parse toc line:  File size | Date       Time     | Name
2685       #TD do_cabextract: can't parse toc line: All done, no errors.
2686       $Totals{'archiveextract'}++;     next unless ($Collecting{'archiveextract'});
2687
2688       if ($p1 =~ /^([^:]+):\s*(.*)/) {
2689          $Counts{'archiveextract'}{"\u$1"}{$2}++;
2690       } else {
2691          $Counts{'archiveextract'}{$p1}{''}++;
2692       }
2693    }
2694
2695    elsif ($p1 =~ /^(?:\(!\) *)?SA TIMED OUT,/) {
2696       $Totals{'satimeout'}++;
2697    }
2698
2699    elsif ($p1 =~ /^mangling (.*)$/) {
2700       $p1 = $1;
2701       if ($p1 =~ /^by (.+?) failed: (.+?), mail will pass unmodified$/) {
2702          #TD mangling by altermine failed: SomeText, mail will pass unmodified
2703          $Totals{'defangerror'}++;        next unless ($Collecting{'defangerror'});
2704          $Counts{'defangerror'}{$1}{$2}++;
2705       }
2706       # other mangle message skipped
2707       else {
2708          #TD mangling YES: 1 (orig: 1), discl_allowed=0, <from@example.com> -> <to@sample.net>
2709          #TD mangling by built-in defanger: 1, <user@example.com>
2710          next;
2711       }
2712    }
2713    elsif ($p1 =~ /^DEFANGING MAIL: (.+)$/) {
2714       # log_level 1
2715       #TD DEFANGING MAIL: WARNING: possible mail bomb, NOT CHECKED FOR VIRUSES:\n  Exceeded storage quota 5961070 bytes by d...
2716       #TD DEFANGING MAIL: WARNING: bad headers - Improper use of control character (char 0D hex): To: <to@example.com\\r>,\\n\\t<to@example.com>
2717       # could use instead...
2718       #do_log(1,"mangling by %s (%s) done, new size: %d, orig %d bytes", $actual_mail_mangle, $mail_mangle, $repl_size, $msginfo->msg_size);
2719       $Totals{'defanged'}++;        next unless ($Collecting{'defanged'});
2720       $Counts{'defanged'}{$1}++;
2721    }
2722
2723    elsif ($p1 =~ /^PenPalsSavedFromKill [-.\d]+,/) {
2724       #TD PenPalsSavedFromKill 8.269-3.160, <ulyanov@steelpro.com.ua> -> <recipient1@recipientdomain.com>
2725       $Totals{'penpalsaved'}++;
2726    }
2727
2728    # I don't know how many variants of time outs there are... I suppose we'll fix as we go
2729    elsif (($p1 =~ /^\(!+\)([^ ]*) is taking longer than \d+ s and will be killed/) or
2730           ($p1 =~ /^\(!+\)(.*) av-scanner FAILED: timed out/) or
2731           ($p1 =~ /^(?:\(!+\))?(.*): timed out/))
2732    {
2733       #TD (!)/usr/local/bin/uvscan is taking longer than 10 s and will be killed
2734       #TD (!!)NAI McAfee AntiVirus (uvscan) av-scanner FAILED: timed out
2735       #TD ClamAV-clamd: timed out, retrying (1)
2736       #TD (!)Sophie: timed out, retrying (2)
2737
2738       $Totals{'avtimeout'}++;                next unless ($Collecting{'avtimeout'});
2739       $Counts{'avtimeout'}{$1}++;
2740    }
2741    elsif (($p2) = ($p1 =~ /SMTP shutdown: (.*)$/)) {                      # log level -1
2742       #TD SMTP shutdown: Error writing a SMTP response to the socket: Broken pipe at (eval 49) line 836, <GEN232> line 51.
2743       #TD SMTP shutdown: tempdir is to be PRESERVED: /var/amavis/tmp/amavis-20070704T095350-13145
2744       strip_trace($p2);
2745       if ($p2 =~ /^tempdir is to be PRESERVED: (.*)\/([^\/]+)$/) {
2746          $Totals{'tmppreserved'}++;
2747          $Counts{'tmppreserved'}{$1}{$2}++   if ($Collecting{'tmppreserved'});
2748          $p2 = "Preserved tempdir in $1";
2749       }
2750       $Totals{'warningsmtpshutdown'}++;      next unless ($Collecting{'warningsmtpshutdown'});
2751       $Counts{'warningsmtpshutdown'}{ucfirst($p2)}++;
2752    }
2753
2754    elsif (($p1 =~ /PRESERVING EVIDENCE in (.*)\/([^\/]+)$/) or
2755          ($p1 =~ /tempdir is to be PRESERVED: (.*)\/([^\/]+)$/)) {
2756       #TD (!)TempDir removal: tempdir is to be PRESERVED: /var/amavis/tmp/amavis-20080110T173606-05767
2757       # log level -1
2758       #TD PRESERVING EVIDENCE in /var/amavis/tmp/amavis-20070704T111558-14883
2759       $Totals{'tmppreserved'}++;             next unless ($Collecting{'tmppreserved'});
2760       $Counts{'tmppreserved'}{$1}{$2}++;
2761    }
2762
2763    elsif ($p1 =~ /^Open relay\? Nonlocal recips but not originating/) {
2764       $Totals{'warningsecurity'}++;
2765       $Counts{'warningsecurity'}{$p1}++    if ($Collecting{'warningsecurity'});
2766    }
2767
2768    # keep before general warnings below, so sadiag gets first crack at log
2769    # lines beginning with "(!) ...".
2770    elsif ($p1 =~ /^(?:\(!+\))?\!?SA (warn|info|error): (.*)$/) {
2771       #TD SA warn: FuzzyOcr: Cannot find executable for gocr
2772       my ($level,$msg) = ($1,$2);
2773
2774       # XXX later, maybe break out stats on FuzzyOcr
2775       # skip "image too small" for now
2776       if ($msg =~ /^FuzzyOcr: Skipping .+, image too small$/) {
2777          #TD SA warn: FuzzyOcr: Skipping ocrad, image too small
2778          #TD SA warn: FuzzyOcr: Skipping ocrad-decolorize, image too small
2779          #$Counts{'sadiags'}{'fuzzyocr'}{'image too small'}++;
2780          next;
2781       }
2782       elsif ($msg =~ /dns: \[\.\.\.\]/) {
2783          #TD SA info: dns: [...] ;; ADDITIONAL SECTION (1 record)
2784          next;
2785       }
2786       # canonicalize some PIDs and IDs
2787       elsif ($msg =~ s/^pyzor: \[\d+\] error/pyzor: [<PID>] error/) {
2788          #TD SA info: pyzor: [11550] error: TERMINATED, signal 15 (000f)
2789       }
2790       elsif ($msg =~ /dns: no likely matching queries for id \d+/) {
2791          $msg =~ s/\d+/<ID>/;
2792       }
2793       elsif ($msg =~ /dns: no callback for id \d+/) {
2794          $msg =~ s/\d+.*$/<ID>.../;
2795       }
2796
2797       # report other SA warn's
2798       $Totals{'sadiags'}++;
2799       next unless ($Collecting{'sadiags'});
2800       $Counts{'sadiags'}{ucfirst($level)}{$msg}++;
2801    }
2802
2803    # catchall for most other warnings
2804    elsif (($p1 =~ /^\(!+\)/) or
2805           ($p1 =~ /^TROUBLE/) or
2806           ($p1 =~ /Can't (?:connect to UNIX|send to) socket/) or
2807           ($p1 =~ /: Empty result from /) or
2808           ($p1 =~ /: Error reading from socket: Connection reset by peer/) or
2809           ($p1 =~ /open\(.*\): Permission denied/) or
2810           ($p1 =~ /^_?WARN: /) or
2811           ($p1 =~ /Can't send SIG \d+ to process \[\d+\]: Operation not permitted/) or
2812           ($p1 =~ /(policy protocol: INVALID(?: AM\.PDP)? ATTRIBUTE LINE: .*)$/) or
2813           ($p1 =~ /(DKIM signature verification disabled, corresponding features not available. If not intentional.*)$/)
2814          )
2815    {
2816       #TD (!)loading policy bank "AM.PDP-SOCK": unknown field "0"
2817       #TD (!!)policy_server FAILED: SQL quarantine code not enabled at (eval 37) line 306, <GEN6> line 4.
2818       #TD (!!)policy_server FAILED: Can't open file /var/spool/amavis/quarantine/spam-CFJYXmeS+FLy: Permission denied at (eval 37) line 330, <GEN28> line 5.
2819       #TD ClamAV-clamd: Empty result from /var/run/clamav/clamd, retrying (1)
2820       #TDdcc open(/var/dcc/map): Permission denied
2821       #TD TROUBLE in check_mail:  FAILED: Died at /usr/sbin/amavisd-maia line 2872, <GEN4> line 22.
2822       #TD TROUBLE in check_mail: spam_scan FAILED: DBD::mysql::st execute failed: MySQL server has gone away at /usr/sbin/amavisd-maia line 3786, <GEN4> line 3036.
2823       #TD TROUBLE in process_request: DBD::mysql::st execute failed: MySQL server has gone away at (eval 35) line 258, <GEN18> line 3.
2824       #TD TROUBLE in process_request: DBD::mysql::st execute failed: Lost connection to MySQL server during query at (eval 35) line 258, <GEN3> line 3.
2825       #TD TROUBLE in process_request: Can't call method "disconnect" on an undefined value at /usr/sbin/amavisd-maia line 2895, <GEN4> line 22.
2826       #TD TROUBLE: recipient not done: <to@example.com> smtp response ...
2827       #TD (!!)TROUBLE in process_request: Can't create file /var/amavis/tmp/amavis-98/email.txt: File exists at /usr/local/sbin/amavisd line 4774, <GEN12> line 4.
2828       #TD TROUBLE: lookup table is an unknown object: object ...
2829       #TD (!) policy protocol: INVALID ATTRIBUTE LINE: /var/spool/courier/tmp/114528/D967099\n
2830       #TD (!) policy protocol: INVALID AM.PDP ATTRIBUTE LINE: /var/spool/courier/tmp/114528/D967099\n
2831       #TD _WARN: bayes: cannot open bayes databases /var/spool/amavis/.spamassassin/bayes_* R/W: lock failed: Interrupted system call\n
2832
2833       $p1 =~ s/^\(!+\)s*//;
2834
2835       if ($p1 =~ /^WARN: (Using cpio instead of pax .*)$/) {
2836          #TD (!)WARN: Using cpio instead of pax can be a security risk; please add:  $pax='pax';  to amavisd.conf and check that the pax(1) utility is available on the system!
2837          $Totals{'warningsecurity'}++;
2838          $Counts{'warningsecurity'}{$1}++    if ($Collecting{'warningsecurity'});
2839          next;
2840       }
2841
2842       $p1 =~ s/, retrying\s+\(\d+\)$//;
2843       strip_trace($p1);
2844
2845       # canonicalize variations of the same message
2846       $p1 =~ s/^run_av \(([^,]+), built-in i\/f\)/$1/;
2847       $p1 =~ s/ av-scanner FAILED: CODE\(0x[^)]+\)/:/;
2848       $p1 =~ s/^(.+: Too many retries to talk to \S+) .*/$1/;
2849
2850       if (($p1 =~ /(\S+): Can't (?:connect|send) to (?:UNIX )?(.*)$/) or
2851           ($p1 =~ /(\S+): (Too many retries to talk to .*)$/))
2852       {
2853
2854          #TD (!)ClamAV-clamd: Can't connect to UNIX socket /var/run/clamav/clamd.socket: No such file or directory, retrying (2)
2855          #TD (!)ClamAV-clamd: Can't connect to UNIX socket /var/run/clamav/clamd: Connection refused, retrying (2)
2856          #TD ClamAV-clamd: Can't connect to UNIX socket /var/run/clamav/clamd: Connection refused, retrying (1)
2857          #TD ClamAV-clamd: Can't send to socket /var/run/clamav/clamd: Transport endpoint is not connected, retrying (1)
2858          #TD Sophie: Can't send to socket /var/run/sophie: Transport endpoint is not connected, retrying (1)
2859          #TD (!)run_av (Sophie, built-in i/f): Too many retries to talk to /var/run/sophie (timed out) at (eval 55) line 310, <GEN16> line 16.
2860          #TD (!)run_av (ClamAV-clamd, built-in i/f): Too many retries to talk to /var/run/clamav/clamd.socket (Can't connect to UNIX socket /var/run/clamav/clamd.socket: No such file or directory) at (eval 52) line 310.
2861          #TD (!!)ClamAV-clamd av-scanner FAILED: CODE(0x804fa08) Too many retries to talk to /var/run/clamav/clamd.socket (Can't connect to UNIX socket /var/run/clamav/clamd.socket: No such file or directory) at (eval 52) line 310. at (eval 52) line 511.
2862          #TD (!!)Sophie av-scanner FAILED: CODE(0x814fd24) Too many retries to talk to /var/run/sophie (timed out) at (eval 55) line 310, <GEN16> line 16. at (eval 55) line 511, <GEN16> line 16.
2863
2864          $Totals{'avconnectfailure'}++;
2865          $Counts{'avconnectfailure'}{$1}{ucfirst($2)}++     if ($Collecting{'avconnectfailure'});
2866          next;
2867       }
2868
2869       # simplify or canonicalize variations of the same message
2870       $p1 =~ s/^TROUBLE(:| in) //;
2871       $p1 =~ s/^_?WARN: //;
2872       $p1 =~ s/Can't create file \S+: (.+)$/Can't create file: $1/;
2873       $p1 =~ s/Can't send SIG \d+ to process \[\d+\]/Can't send SIG to process/;
2874
2875       $Totals{'warning'}++;      next unless ($Collecting{'warning'});
2876       $Counts{'warning'}{$p1}++;
2877    }
2878
2879    # Begin forced warnings: Keep this code below warning catchall
2880    elsif ($p1 =~ /^lookup_sql: /) {
2881       #TD lookup_sql: 2006, MySQL server has gone away
2882       $Totals{'warningsql'}++;   next unless ($Collecting{'warningsql'});
2883       $Counts{'warningsql'}{'SQL died'}++;
2884
2885    } elsif (($reason,$item) = ($p1 =~ /^connect_to_sql: ([^']+) '\S+': (.*?)(?: \(\d+\))?$/) or
2886             ($item,$reason) = ($p1 =~ /^lookup_sql_field\((.*)\) \(WARN: (no such field in the SQL table)\)/)) {
2887       #TD connect_to_sql: unable to connect to DSN 'DBI:mysql:maia:sqlhost1.example.com': Lost connection to MySQL server during query
2888       #TD connect_to_sql: unable to connect to DSN 'DBI:mysql:maia:sqlhost2.example.com': Can't connect to MySQL server on 'sqlhost2.example.com' (111)
2889       #TD lookup_sql_field(id) (WARN: no such field in the SQL table), "from@example.com" result=undef
2890       $Totals{'warningsql'}++;   next unless ($Collecting{'warningsql'});
2891       $Counts{'warningsql'}{ucfirst("$reason: $item")}++;
2892    }
2893    # End forced warnings
2894
2895    # panic
2896    elsif ( ($p2) = ($p1 =~ /^(?:\(!\)\s*)?PANIC, (.*)$/)) {
2897       #TD PANIC, PANIC, SA produced a clone process of [19122], TERMINATING CLONE [19123]
2898
2899       $Totals{'panic'}++;        next unless ($Collecting{'panic'});
2900       $Counts{'panic'}{$p2}++;
2901
2902    }
2903
2904    # fatal
2905    elsif ( $p1 =~ /^Requesting process rundown after fatal error$/) {
2906       #TD Requesting process rundown after fatal error
2907       $Totals{'fatal'}++;        next unless ($Collecting{'fatal'});
2908       $Counts{'fatal'}{$p1}++;
2909
2910    # DCC
2911    } elsif (($reason) = ($p1 =~ /^(missing message body; fatal error)/) or
2912             ($reason) = ($p1 =~ /^(try to start dccifd)/)) {
2913       $Totals{'dccerror'}++;     next unless ($Collecting{'dccerror'});
2914       $Counts{'dccerror'}{ucfirst($reason)}++;
2915    }
2916    elsif ($p1 =~ /^continue not asking DCC \d+ seconds after failure/) {
2917       $Totals{'dccerror'}++;     next unless ($Collecting{'dccerror'});
2918       $Counts{'dccerror'}{'Continue not asking DCC after failure'}++;
2919    }
2920    elsif ($p1 =~ /^no DCC answer from (\S+) after \d+ ms$/) {
2921       $Totals{'dccerror'}++;     next unless ($Collecting{'dccerror'});
2922       $Counts{'dccerror'}{"No answer from $1"}++;
2923    }
2924
2925    elsif ( ($reason, $from, $to) = ($p1 =~ /^skip local delivery\((\d+)\): <(.*?)> -> <(.*?)>$/)) {
2926       $Totals{'localdeliveryskipped'}++;   next unless ($Collecting{'localdeliveryskipped'});
2927       $from = '<>' if ($from eq '');
2928       $reason = $reason == 1 ? "No localpart" : $reason == 2 ? "Local alias is null" : "Other";
2929       $Counts{'localdeliveryskipped'}{$reason}{$from}{$to}++;
2930    }
2931
2932    # hard and soft whitelisted/blacklisted
2933    elsif ($p1 =~ /^wbl: (.*)$/) {
2934       # ignore wbl entries, can't think of good way to reliably summarize.
2935       # and 'black or whitelisted by all' makes using by-white or -black list
2936       # groupings impossible
2937       next;
2938 =cut
2939       $p1 = $1;
2940
2941       # TD wbl: black or whitelisted by all recips
2942       next if ($p1 =~ /^black or whitelisted/); # not clear how to report this, so skip
2943       next if ($p1 =~ /^checking sender/);                    # ll 4
2944       next if ($p1 =~ /^(LDAP) query keys/);                  # ll 5
2945       next if ($p1 =~ /^(LDAP) recip/);                       # ll 5
2946       next if ($p1 =~ /^recip <[^>]*> (?:black|white)listed sender/);  # ll 5
2947
2948       # lookup order: SQL, LDAP, static
2949       if ($p1 =~ s/^\(SQL\) recip <[^>]*>//) {
2950          next if ($p1 =~ /^, \S+ matches$/);                  # ll 5
2951          next if ($p1 =~ /^, rid=/);                          # ll 4
2952          next if ($p1 =~ /^ is neutral to sender/);           # ll 5
2953          next if ($p1 =~ /^ (?:white|black)listed sender </); # ll 5
2954          # ll -1
2955          #wbl: (SQL) recip <%s> whitelisted sender <%s>, '.  unexpected wb field value
2956       }
2957       #ll2
2958       # wbl: (SQL) soft-(white|black)listed (%s) sender <%s> => <%s> (rid=%s)',  $val, $sender, $recip, $user_id);
2959       # multiple senders: message sender, then "from", etc.
2960       #ll2
2961       # wbl: soft-(white|black)listed (%s) sender <%s> => <%s>,
2962
2963       #TD wbl: whitelisted sender <sender@example.com>
2964       #TD wbl: soft-whitelisted (-3) sender <from@example.com> => <to@sample.net>, recip_key="."
2965       #TD wbl: whitelisted by user@example.com, but not by all, sender <bounces@example.net>, <user@example.org>
2966       # wbl: (whitelisted|blacklisted|black or whitelisted by all recips|(white|black)listed by xxx,yyy,... but not by all) sender %s
2967
2968       if ($p1 =~ /^(?:\(SQL\) )?(?:(soft)-)?((?:white|black)listed)(?: \([^)]+\))? sender <([^>]*)>/) {
2969          my ($type,$list,$sender) = ($1,$2,$3);
2970          $Totals{$list}++;       next unless ($Collecting{$list});
2971          $type = $type ? 'Soft' : 'Hard' ;
2972          my ($localpart, $domainpart) = split (/@/, lc $sender);
2973          ($localpart, $domainpart) = ($sender, '*unspecified')   if ($domainpart eq '');
2974          $Counts{$list}{$type}{$domainpart}{$localpart}++;
2975       }
2976       else {
2977          inc_unmatched('wbl');
2978          next;
2979       }
2980 =cut
2981    }
2982
2983    # XXX: WHITELISTED or BLACKLISTED should be caught in SPAM tag above
2984    elsif (($p1 =~ /^white_black_list: whitelisted sender/) or
2985           ($p1 =~ /.* WHITELISTED/) ) {
2986       $Totals{'whitelisted'}++;
2987
2988    } elsif (($p1 =~ /^white_black_list: blacklisted sender/) or
2989                 ( $p1 =~ /.* BLACKLISTED/) ) {
2990       $Totals{'blacklisted'}++;
2991
2992    } elsif ($p1 =~ /^Turning AV infection into a spam report: score=([^,]+), (.+)$/) {
2993       #TD Turning AV infection into a spam report: score=4.1, AV:Sanesecurity.ScamL.375.UNOFFICIAL=4.1
2994       #TD Turning AV infection into a spam report: score=3.4, AV:Sanesecurity.Phishing.Cur.180.UNOFFICIAL=3.1,AV:Sanesecurity.Phishing.Cur.180.UNOFFICIAL=3.4
2995       #BAT.Backdoor.Poisonivy.E178-SecuriteInfo.com
2996
2997       next unless ($Collecting{'malwaretospam'});
2998       #my $score_max = $1;
2999       my @list = split (/,/, $2);
3000       @list = unique_list(\@list);
3001       foreach (@list) {
3002          my ($name,$score) = split (/=/,$_);
3003          $name =~ s/^AV://;
3004          my $type = $name =~ s/\.UNOFFICIAL$// ? 'Unofficial' : 'Official';
3005          # strip trailing numeric variant (...Phishing.Cur.863)
3006          my $variant = $name =~ s/([.-]\d+)$// ?  $1 : '*invariant';
3007          $Counts{'malwaretospam'}{$type}{$name}{$variant}{$score}++
3008       }
3009
3010    # The virus_scan line reports only the one virus name when more than one scanner detects a virus.
3011    # Use instead the ask_av and run_av lines (see below)
3012    #
3013    #} elsif ( my ($malware, $scanners) = ($p1 =~ /virus_scan: \(([^)]+)\), detected by \d+ scanners: (.*)$/ )) {
3014       #TD virus_scan: (HTML.Phishing.Bank-43), detected by 1 scanners: ClamAV-clamd
3015       #TD virus_scan: (Worm.SomeFool.D, Worm.SomeFool.D), detected by 1 scanners: ClamAV-clamd
3016       #TD virus_scan: (Trojan.Downloader.Small-9993), detected by 2 scanners: ClamAV-clamd, NAI McAfee AntiVirus (uvscan)
3017    #   foreach (split /, /, $scanners) {
3018    #      #$Totals{'malwarebyscanner'}++;       # No summary output: redundant w/malwarepassed,malwareblocked}
3019    #      $Counts{'malwarebyscanner'}{"$_"}{$malware}++;
3020    #   }
3021
3022    } elsif ($p1 =~ /^(?:ask_av|run_av) (.*)$/) {
3023       next unless ($Collecting{'malwarebyscanner'});
3024
3025       if (my ($scanner, $name) = ($1 =~ /^\((.+)\):(?: [^:]+)? INFECTED: ([^,]+)/)) {
3026          #TD ask_av (ClamAV-clamd): /var/amavis/tmp/amavis-20070830T070403-13776/parts INFECTED: Email.Malware.Sanesecurity.07082700
3027          #TD run_av (NAI McAfee AntiVirus (uvscan)): INFECTED: W32/Zhelatin.gen!eml, W32/Zhelatin.gen!eml
3028          my $type = $name =~ s/\.UNOFFICIAL$// ? 'Unofficial' : 'Official';
3029          my $variant = '';
3030          if ($name =~ s/([.-]\d+)$//) {     # strip trailing numeric variant (...Phishing.Cur.863)
3031             $variant = $1;
3032          }
3033          $Counts{'malwarebyscanner'}{$scanner}{$type}{$name}{$variant}++;
3034       }
3035       # currently ignoring other ask_av or run_av lines
3036    }
3037
3038    # Extra Modules loaded at runtime
3039    #TD extra modules loaded after daemonizing/chrooting: Mail/SPF/Query.pm
3040    elsif (($item) = ( $p1 =~ /^extra modules loaded(?: after daemonizing(?:\/chrooting)?)?: (.+)$/)) {
3041       #TD extra modules loaded: PerlIO.pm, PerlIO/scalar.pm
3042       foreach my $code (split /, /, $item) {
3043          #TD extra modules loaded: unicore/lib/gc_sc/Digit.pl, unicore/lib/gc_sc/SpacePer.pl
3044          # avoid useless reporting of pseudo-modules which can't be pre-loaded once
3045          unless ($code =~ m#^unicore/lib/#) {
3046             $Totals{'extramodules'}++;
3047             $Counts{'extramodules'}{$code}++    if ($Collecting{'extramodules'});
3048          }
3049       }
3050
3051    # Timing report
3052    } elsif (my ($total,$report) = ( $p1 =~ /^(?:size: \d+, )?TIMING \[total (\d+) ms(?:, [^]]+)?\] - (.+)$/)) {
3053      next if ($report =~ /^got data/);    # skip amavis release timing
3054       #TD TIMING [total 5808 ms] - SMTP greeting: 5 (0%)0, SMTP LHLO: 1 (0%)0, SMTP pre-MAIL: 2 (0%)0, SMTP pre-DATA-flush: 5 (0%)0, SMTP DATA: 34 (1%)1, check_init: 1 (0%)1
3055       # older format, maia mailguard
3056       #TD TIMING [total 3795 ms] - SMTP EHLO: 1 (0%), SMTP pre-MAIL: 0 (0%), maia_read_system_config: 1 (0%), maia_get_mysql_size_limit: 0 (0%), SA check: 3556 (94%), rundown: 0 (0%)
3057       # v2.8.1
3058       # .... size: 3815, TIMING [total 1901 ms, cpu 657 ms] - ...
3059
3060
3061       # Timing line is incomplete - let's report it
3062       if ($p1 !~ /\d+ \(\d+%\)\d+$/ and $p1 !~ /\d+ \(\d+%\)$/) {
3063          inc_unmatched('timing');
3064          next;
3065       }
3066
3067       if ($Opts{'timings'}) {
3068          my @pairs = split(/[,:] /, $report);
3069          while (my ($key,$value) = @pairs) {
3070             #4 (0%)0
3071             my ($ms) = ($value =~ /^([\d.]+) /);
3072             # maintain a per-test list of timings
3073             push @{$Timings{$key}}, $ms;
3074             shift @pairs; shift @pairs;
3075          }
3076          push @TimingsTotals, $total;
3077       }
3078
3079    } elsif ((($total,$report) = ( $p1 =~ /^TIMING-SA total (\d+) ms - (.+)$/ )) or
3080             (($total,$report) = ( $p1 =~ /^TIMING-SA \[total (\d+) ms, cpu \d+ ms\] - (.+)$/ ))) {
3081          #TIMING-SA [total 3219 ms, cpu 432 ms] - parse: 6 (0.2%), ext
3082       #TD TIMING-SA total 5478 ms - parse: 1.69 (0.0%), extract_message_metadata: 16 (0.3%), get_uri_detail_list: 2 (0.0%), tests_pri_-1000: 25 (0.4%), tests_pri_-950: 0.67 (0.0%), tests_pri_-900: 0.83 (0.0%), tests_pri_-400: 19 (0.3%), check_bayes: 17 (0.3%), tests_pri_0: 5323 (97.2%), check_spf: 12 (0.2%), poll_dns_idle: 0.81 (0.0%), check_dkim_signature: 1.50 (0.0%), check_razo r2: 5022 (91.7%), check_dcc: 192 (3.5%), check_pyzor: 0.02 (0.0%), tests_pri_500: 9 (0.2%), tests_pri_1000: 24 (0.4%), total_awl: 23 (0.4%), check_awl: 10 (0.2%), update_awl: 8 (0.1%), learn: 36 (0.7%), get_report: 1.77 (0.0%)
3083
3084       # Timing line is incomplete - let's report it
3085       if ($p1 !~ /[\d.]+ \([\d.]+%\)[\d.]+$/ and $p1 !~ /[\d.]+ \([\d.]+%\)$/) {
3086          inc_unmatched('timing-sa');
3087          next;
3088       }
3089       if ($Opts{'sa_timings'}) {
3090          my @pairs = split(/[,:] /, $report);
3091          while (my ($key,$value) = @pairs) {
3092             #4 (0%)0
3093             my ($ms) = ($value =~ /^([\d.]+) /);
3094             # maintain a per-SA test list of timings
3095             push @{$TimingsSA{$key}}, $ms;
3096             shift @pairs; shift @pairs;
3097          }
3098          push @TimingsSATotals, $total;
3099       }
3100
3101    # Bounce killer: 2.6+
3102    } elsif ($p1 =~ /^bounce (.*)$/) {
3103       #TD bounce killed, <user@example.com> -> <to@example.net>, from: user@example.com, message-id: <CA8E335-CC-2EFB@example.com>, return-path: <user@example.com>
3104       #TD bounce rescued by domain, <user@example.com> -> <to@example.net>, from: user@example.com, message-id: <CA8E335-CC-2EFB@example.com>, return-path: <user@example.com>
3105       #TD bounce rescued by originating, <user@example.com> -> <to@example.net>, from: user@example.com, message-id: <CA8E335-CC-2EFB@example.com>, return-path: <user@example.com>
3106       #TD bounce rescued by: pen pals disabled, <user@example.com> -> <to@example.net>, from: user@example.com, message-id: <CA8E335-CC-2EFB@example.com>, return-path: <user@example.com>
3107       $p2 = $1;
3108
3109       if ($p2 =~ /^killed, <(.+?)> -> /) {
3110          $Totals{'bouncekilled'}++;
3111          $Counts{'bouncekilled'}{$1 eq '' ? '<>' : $1}++    if ($Collecting{'bouncekilled'});
3112       }
3113       elsif ($p2 =~ /^rescued by ([^,]+), <(.+?)> -> /) {
3114          # note: ignores "rescued by: pen pals disabled"
3115          $Totals{'bouncerescued'}++;
3116          $Counts{'bouncerescued'}{'By ' . $1}{$2 eq '' ? '<>' : $2}++    if ($Collecting{'bouncerescued'});
3117       }
3118       elsif ($p2 =~ /^unverifiable, <(.+?)> -> /) {
3119          # note: ignores "rescued by: pen pals disabled"
3120          $Totals{'bounceunverifiable'}++;
3121          $Counts{'bounceunverifiable'}{$1 eq '' ? '<>' : $1}++    if ($Collecting{'bounceunverifiable'});
3122       }
3123       #TD bounce unverifiable, <postmaster@nurturegood.com> -> <dave@davewolloch.com>
3124       #TD bounce unverifiable, <> -> <Dave@davewolloch.com>
3125    }
3126
3127    # Decoders
3128    elsif (my ($suffix, $info) = ( $p1 =~ /^Internal decoder for (\.\S*)\s*(?:\(([^)]*)\))?$/)) {
3129       #TD Internal decoder for .gz   (backup, not used)
3130       #TD Internal decoder for .zip
3131       next unless ($Opts{'startinfo'});
3132       $StartInfo{'Decoders'}{'Internal'}{$suffix} = $info;
3133    }
3134
3135    elsif (($suffix, $decoder) = ( $p1 =~ /^No decoder for\s+(\.\S*)\s*(?:tried:\s+(.*))?$/)) {
3136       #TD No decoder for       .tnef tried: tnef
3137       # older
3138       #TD No decoder for       .doc
3139       next unless ($Opts{'startinfo'});
3140       $StartInfo{'Decoders'}{'None'}{$suffix} = "tried: " . ($decoder ? $decoder : "unknown");
3141    }
3142
3143    elsif (($suffix, $decoder) = ( $p1 =~ /^Found decoder for\s+(\.\S*)\s+at\s+(.*)$/)) {
3144       #TD Found decoder for    .bz2  at /usr/bin/bzip2 -d
3145       #TD Found decoder for    .bz2  at /usr/bin/7za (backup, not used)
3146       next unless ($Opts{'startinfo'});
3147       $StartInfo{'Decoders'}{'External'}{$suffix} = exists $StartInfo{'Decoders'}{'External'}{$suffix} ?
3148               join '; ', $StartInfo{'Decoders'}{'External'}{$suffix}, $decoder : $decoder;
3149    }
3150
3151    # AV Scanners
3152    elsif (my ($tier, $scanner, $location) = ( $p1 =~ /^Found (primary|secondary) av scanner (.+) at (.+)$/)) {
3153       #TD Found primary av scanner NAI McAfee AntiVirus (uvscan) at /usr/local/bin/uvscan
3154       #TD Found secondary av scanner ClamAV-clamscan at /usr/local/bin/clamscan
3155       next unless ($Opts{'startinfo'});
3156       $StartInfo{'AVScanner'}{"\u$tier"}{$scanner} = $location;
3157
3158    } elsif (($tier, $scanner, $location) = ( $p1 =~ /^No (primary|secondary) av scanner: (.+)$/)) {
3159       #TD No primary av scanner: CyberSoft VFind
3160       next unless ($Opts{'startinfo'});
3161       $StartInfo{'AVScanner'}{"\u$tier (not found)"}{$scanner} = '';
3162
3163    } elsif ( (($tier, $scanner) = ( $p1 =~ /^Using internal av scanner code for \(([^)]+)\) (.+)$/)) or
3164              (($tier, $scanner) = ( $p1 =~ /^Using (.*) internal av scanner code for (.+)$/))) {
3165       #TD Using internal av scanner code for (primary) ClamAV-clamd
3166       #TD Using primary internal av scanner code for ClamAV-clamd
3167       next unless ($Opts{'startinfo'});
3168       $StartInfo{'AVScanner'}{"\u$tier internal"}{$scanner} = '';
3169
3170    # (Un)Loaded code, protocols, etc.
3171    } elsif (my ($code, $loaded) = ( $p1 =~ /^(\S+)\s+(?:proto? |base |protocol )?\s*(?:code)?\s+((?:NOT )?loaded)$/)) {
3172       next unless ($Opts{'startinfo'});
3173       $StartInfo{'Code'}{"\u\L$loaded"}{$code} = "";
3174
3175    } elsif (my ($module, $vers) = ( $p1 =~ /^Module (\S+)\s+(.+)$/)) {
3176       #TD Module Amavis::Conf        2.086
3177       next unless ($Opts{'startinfo'});
3178       $StartInfo{'Code'}{'Loaded'}{$module} = $vers;
3179
3180    } elsif (($module, my $families) = ( $p1 =~ /^socket module (\S+),\s+(.+)$/)) {
3181       #TD socket module IO::Socket::IP, protocol families available: INET, INET6
3182       next unless ($Opts{'startinfo'});
3183       $StartInfo{'Code'}{'Loaded'}{$module} = $families;
3184
3185    } elsif (($code, $location) = ( $p1 =~ /^Found \$(\S+)\s+at\s+(.+)$/)) {
3186       #TD Found $file            at /usr/bin/file
3187       #TD Found $uncompress at /usr/bin/gzip -d
3188       next unless ($Opts{'startinfo'});
3189       $StartInfo{'Code'}{'Loaded'}{$code} = $location;
3190
3191    } elsif (($code, $location) = ( $p1 =~ /^No \$(\S+),\s+not using it/)) {
3192       #TD No $dspam,             not using it
3193       next unless ($Opts{'startinfo'});
3194       $StartInfo{'Code'}{'Not loaded'}{$code} = $location;
3195
3196    } elsif (($code, $location) = ( $p1 =~ /^No ext program for\s+([^,]+), (tried: .+)/)) {
3197       #TD No ext program for   .kmz, tried: 7za, 7z
3198       #TD No ext program for   .F, tried: unfreeze, freeze -d, melt, fcat
3199       next unless ($Opts{'startinfo'});
3200       $StartInfo{'Code'}{'Not found'}{$code} = $location;
3201
3202
3203    } elsif ( $p1 =~ /^starting\.\s+(.+) at \S+ (?:amavisd-new-|Maia Mailguard )([^,]+),/) {
3204       #TD starting.  /usr/local/sbin/amavisd at mailhost.example.com amavisd-new-2.5.0 (20070423), Unicode aware, LANG="C"
3205       #TD starting.  /usr/sbin/amavisd-maia at vwsw02.eon.no Maia Mailguard 1.0.2, Unicode aware, LANG=en_US.UTF-8
3206       next unless ($Opts{'startinfo'});
3207       %StartInfo = ()  if !exists $StartInfo{'Logging'};
3208       $StartInfo{'ampath'}    = $1;
3209       $StartInfo{'amversion'} = $2;
3210
3211    } elsif ( $p1 =~ /^config files read: (.*)$/) {
3212       #TD config files read: /etc/amavisd.conf, /etc/amavisd-overrides.conf
3213       next unless ($Opts{'startinfo'});
3214       $StartInfo{'Configs'} = "$1";
3215
3216    } elsif ($p1 =~ /^Creating db in ([^;]+); [^,]+, (.*)$/) {
3217       #TD Creating db in /var/spool/amavis/db/; BerkeleyDB 0.31, libdb 4.4
3218       next unless ($Opts{'startinfo'});
3219       $StartInfo{'db'} = "$1\t($2)";
3220
3221    } elsif ($p1 =~ /^BerkeleyDB-based Amavis::Cache not available, using memory-based local cache$/) {
3222       #TD BerkeleyDB-based Amavis::Cache not available, using memory-based local cache
3223       next unless ($Opts{'startinfo'});
3224       $StartInfo{'db'} = "BerkeleyDB\t(memory-based cache: Amavis::Cache unavailable)";
3225
3226    } elsif (my ($log) = ($p1 =~ /^logging initialized, log (level \d+, (?:STDERR|syslog: \S+))/)) {
3227       next unless ($Opts{'startinfo'});
3228       %StartInfo = ();        # first amavis log entry, clear out previous start info
3229       $StartInfo{'Logging'} = $log;
3230
3231    } elsif (( $p1 =~ /^(:?perl=[^,]*, )?user=([^,]*), EUID: (\d+) [(](\d+)[)];\s+group=([^,]*), EGID: ([\d ]+)[(]([\d ]+)[)]/)) {
3232       # uninteresting...
3233       #next unless ($Opts{'startinfo'});
3234       #$StartInfo{'IDs'}{'user'} = $1;
3235       #$StartInfo{'IDs'}{'euid'} = $2;
3236       #$StartInfo{'IDs'}{'uid'} = $3;
3237       #$StartInfo{'IDs'}{'group'} = $4;
3238       #$StartInfo{'IDs'}{'egid'} = $5;
3239       #$StartInfo{'IDs'}{'gid'} = $6;
3240    } elsif ($p1 =~ /^after_chroot_init: EUID: (\d+) [(](\d+)[)]; +EGID: ([\d ]+)[(]([\d ]+)[)]/) {
3241       #TD after_chroot_init: EUID: 999 (999);  EGID: 54322 54322 54322 (54322 54322 54322)
3242       # uninteresting...
3243
3244    } elsif ($p1 =~ /^SpamAssassin debug facilities: (.*)$/) {
3245       next unless ($Opts{'startinfo'});
3246       $StartInfo{'sa_debug'} = $1;
3247
3248    # amavis >= 2.6.3
3249    } elsif ($p1 =~ /^SpamAssassin loaded plugins: (.*)$/) {
3250       #TD SpamAssassin loaded plugins: AWL, AutoLearnThreshold, Bayes, BodyEval, Check, DCC, DKIM, DNSEval, HTMLEval, HTTPSMismatch, Hashcash, HeaderEval, ImageInfo, MIMEEval, MIMEHeader, Pyzor, Razor2, RelayEval, ReplaceTags, SPF, SpamCop, URIDNSBL, URIDetail, URIEval, VBounce, WLBLEval, WhiteListSubject
3251       next unless ($Opts{'startinfo'});
3252       map { $StartInfo{'SAPlugins'}{'Loaded'}{$_} = '' } split(/, /, $1);
3253
3254    } elsif (($p2) = ( $p1 =~ /^Net::Server: (.*)$/ )) {
3255       next unless ($Opts{'startinfo'});
3256       if ($p2 =~ /^.*starting! pid\((\d+)\)/) {
3257          #TD Net::Server: 2007/05/02-11:05:24 Amavis (type Net::Server::PreForkSimple) starting! pid(4405)
3258          $StartInfo{'Server'}{'pid'} = $1;
3259       } elsif ($p2 =~ /^Binding to UNIX socket file (.*) using/) {
3260          #TD Net::Server: Binding to UNIX socket file /var/spool/amavis/amavisd.sock using SOCK_STREAM
3261          $StartInfo{'Server'}{'socket'} = $1;
3262       } elsif ($p2 =~ /^Binding to TCP port (\d+) on host (.*)$/) {
3263          #TD Net::Server: Binding to TCP port 10024 on host 127.0.0.1
3264          $StartInfo{'Server'}{'ip'} = "$2:$1";
3265       } elsif ($p2 =~ /^Setting ([ug]id) to "([^"]+)"$/) {
3266          $StartInfo{'Server'}{$1} = $2;
3267          #TD Net::Server: Setting gid to "91 91"
3268          #TD Net::Server: Setting uid to "91"
3269       }
3270       # skip others
3271    }
3272
3273    # higher debug level or rare messages skipped last
3274    elsif (! check_ignore_list ($p1, @ignore_list_final)) {
3275       inc_unmatched('final');
3276    }
3277 }
3278
3279 ########################################
3280 # Final tabulations, and report printing
3281
3282
3283 # spamblocked includes spamdiscarded; adjust here
3284 $Totals{'spamblocked'} -= $Totals{'spamdiscarded'};
3285
3286
3287 #Totals: Blocked/Passed totals
3288 $Totals{'totalblocked'} += $Totals{$_} foreach (
3289    qw(
3290       malwareblocked
3291       bannednameblocked
3292       uncheckedblocked
3293       spamblocked
3294       spamdiscarded
3295       spammyblocked
3296       badheaderblocked
3297       oversizedblocked
3298       mtablocked
3299       cleanblocked
3300       tempfailblocked
3301       otherblocked
3302    ));
3303
3304 $Totals{'totalpassed'} += $Totals{$_} foreach (
3305    qw(
3306       malwarepassed
3307       bannednamepassed
3308       uncheckedpassed
3309       spampassed
3310       spammypassed
3311       badheaderpassed
3312       oversizedpassed
3313       mtapassed
3314       cleanpassed
3315       tempfailpassed
3316       otherpassed
3317    ));
3318
3319 # Priority: VIRUS BANNED UNCHECKED SPAM SPAMMY BADH OVERSIZED MTA CLEAN
3320 #Totals: Ham/Spam
3321
3322 $Totals{'totalmalware'} += $Totals{$_} foreach (
3323    qw(malwarepassed malwareblocked));
3324
3325 $Totals{'totalbanned'} += $Totals{$_} foreach (
3326    qw(bannednamepassed bannednameblocked));
3327
3328 $Totals{'totalunchecked'} += $Totals{$_} foreach (
3329    qw(uncheckedpassed uncheckedblocked));
3330
3331 $Totals{'totalspammy'} += $Totals{$_} foreach (
3332    qw(spammypassed spammyblocked));
3333
3334 $Totals{'totalbadheader'} += $Totals{$_} foreach (
3335    qw(badheaderpassed badheaderblocked));
3336
3337 $Totals{'totaloversized'} += $Totals{$_} foreach (
3338    qw(oversizedpassed oversizedblocked));
3339
3340 $Totals{'totalmta'} += $Totals{$_} foreach (
3341    qw(mtapassed mtablocked));
3342
3343 $Totals{'totalclean'} += $Totals{$_} foreach (
3344    qw(cleanpassed cleanblocked));
3345
3346 $Totals{'totalother'} += $Totals{$_} foreach (
3347    qw(tempfailpassed tempfailblocked otherpassed otherblocked));
3348
3349 $Totals{'totalspam'} += $Totals{$_} foreach (
3350    qw(spampassed spamblocked spamdiscarded totalspammy));
3351
3352 # everything lower priority than SPAMMY is considered HAM
3353 $Totals{'totalham'} += $Totals{$_} foreach (
3354    qw(totalbadheader totaloversized totalmta totalclean));
3355
3356 $Totals{'totalmsgs'} += $Totals{$_} foreach (
3357    qw(totalmalware totalbanned totalunchecked totalspam totalham totalother));
3358
3359 # Print the summary report if any key has non-zero data.
3360 # Note: must explicitely check for any non-zero data,
3361 # as Totals always has some keys extant.
3362 #
3363 if ($Opts{'summary'}) {
3364    for (keys %Totals) {
3365       if ($Totals{$_}) {
3366          print_summary_report (@Sections);
3367          last;
3368       }
3369    }
3370 }
3371
3372 # Print the detailed report, if detail is sufficiently high
3373 #
3374 if ($Opts{'detail'} >= 5) {
3375    print_detail_report (@Sections);
3376    printAutolearnReport;
3377    printSpamScorePercentilesReport;
3378    printSpamScoreFrequencyReport;
3379    printSARulesReport;
3380    printTimingsReport("Scan Timing Percentiles", \%Timings, \@TimingsTotals, $Opts{'timings'});
3381    printTimingsReport("SA Timing Percentiles", \%TimingsSA, \@TimingsSATotals, 0-$Opts{'sa_timings'});
3382    printStartupInfoReport        if ($Opts{'detail'} >= 10);
3383 }
3384
3385 #{
3386 #use Data::Dumper;
3387 #print Dumper(\%p0ftags);
3388 #print Dumper($Counts{'p0f'});
3389 #}
3390
3391 # Finally, print any unmatched lines
3392 #
3393 print_unmatched_report();
3394
3395 # Evaluates a given line against the list of ignore patterns.
3396 #
3397 sub check_ignore_list($ \@) {
3398    my ($line, $listref) = @_;
3399
3400    foreach (@$listref) {
3401       return 1 if $line =~ /$_/;
3402    }
3403
3404    return 0;
3405 }
3406
3407
3408 # Spam score percentiles report
3409 #
3410 =pod
3411    ==================================================================================
3412    Spam Score Percentiles        0%       50%       90%       95%       98%      100%
3413    ----------------------------------------------------------------------------------
3414    Score Spam (100)           6.650    21.906    34.225    36.664    38.196    42.218
3415    Score Ham (1276)         -17.979    -2.599     0.428     2.261     3.472     6.298
3416    ==================================================================================
3417 =cut
3418 sub printSpamScorePercentilesReport {
3419    return unless ($Opts{'score_percentiles'} and keys %SpamScores);
3420
3421    #printf "Scores $_ (%d): @{$SpamScores{$_}}\n", scalar @{$SpamScores{$_}} foreach keys %SpamScores;
3422    my (@p, @sorted);
3423    my @percents = split /[\s,]+/, $Opts{'score_percentiles'};
3424    my $myfw2 = $fw2 - 1;
3425
3426    print  "\n", $sep1 x $fw1, $sep1 x $fw2 x @percents;
3427    printf "\n%-${fw1}s" . "%${myfw2}s%%" x @percents ,   "Spam Score Percentiles", @percents;
3428    print  "\n", $sep2 x $fw1, $sep2 x $fw2 x @percents;
3429
3430    foreach my $ccat (keys %SpamScores) {
3431       @sorted = sort { $a <=> $b } @{$SpamScores{$ccat}};
3432       @p = get_percentiles (@sorted, @percents);
3433       printf "\n%-${fw1}s" . "%${fw2}.3f" x scalar (@p), "Score \u$ccat (" . scalar (@sorted) . ')', @p;
3434    }
3435
3436    print  "\n", $sep1 x $fw1, $sep1 x $fw2 x @percents, "\n";
3437 }
3438
3439 # Spam score frequency report
3440 #
3441 =pod
3442    ======================================================================================================
3443    Spam Score Frequency      <= -10     <= -5      <= 0      <= 5     <= 10     <= 20     <= 30      > 30
3444    ------------------------------------------------------------------------------------------------------
3445    Hits (1376)                   29       168       921       170        29        33         1        25
3446    Percent of Hits            2.11%    12.21%    66.93%    12.35%     2.11%     2.40%     0.07%     1.82%
3447    ======================================================================================================
3448 =cut
3449 sub printSpamScoreFrequencyReport {
3450    return unless ($Opts{'score_frequencies'} and keys %SpamScores);
3451
3452    my @scores = ();
3453    push @scores, @{$SpamScores{$_}}  foreach (keys %SpamScores);
3454    my $nscores = scalar @scores;
3455
3456    my @sorted  = sort { $a <=> $b } @scores;
3457    my @buckets = sort { $a <=> $b } split /[\s,]+/, $Opts{'score_frequencies'};
3458    push @buckets, $buckets[-1] + 1;
3459    #print "Scores: @sorted\n";
3460
3461    my @p = get_frequencies (@sorted, @buckets);
3462
3463    my @ranges = ( 0 ) x @buckets;
3464    my $last = @buckets - 1;
3465    $ranges[0]   = sprintf "%${fw2}s", " <= $buckets[0]";
3466    $ranges[-1]  = sprintf "%${fw2}s", " > $buckets[-2]";
3467    for my $i (1 .. @buckets - 2) {
3468       $ranges[$i] = sprintf "%${fw2}s", " <= $buckets[$i]";
3469    }
3470
3471    print  "\n", $sep1 x $fw1, $sep1 x $fw2 x @buckets;
3472    printf "\n%-${fw1}s" . "%-${fw2}s" x @buckets ,     "Spam Score Frequency", @ranges;
3473    print  "\n", $sep2 x $fw1, $sep2 x $fw2 x @buckets;
3474    printf "\n%-${fw1}s" . "%${fw2}d" x scalar (@p),    "Hits ($nscores)", @p;
3475    my $myfw2 = $fw2 - 1;
3476    printf "\n%-${fw1}s" . "%${myfw2}.2f%%" x scalar (@p),    "Percent of Hits", map {($_ / $nscores) * 100.0; } @p;
3477    print  "\n", $sep1 x $fw1, $sep1 x $fw2 x @buckets, "\n";
3478 }
3479
3480 # SpamAssassin rules report
3481 #
3482 =pod
3483    ===========================================================================
3484    SpamAssassin Rule Hits: Spam
3485    ---------------------------------------------------------------------------
3486    Rank     Hits    % Msgs   % Spam    % Ham      Score Rule
3487    ----     ----    ------   ------    -----      ----- ----
3488       1       44    81.48%   93.62%    0.00%      1.961 URIBL_BLACK
3489       2       44    81.48%   93.62%   14.29%      0.001 HTML_MESSAGE
3490       3       42    77.78%   89.36%    0.00%      2.857 URIBL_JP_SURBL
3491       4       38    70.37%   80.85%   14.29%      2.896 RCVD_IN_XBL
3492       5       37    68.52%   78.72%    0.00%      2.188 RCVD_IN_BL_SPAMCOP_NET
3493    ...
3494    ===========================================================================
3495
3496    ===========================================================================
3497    SpamAssassin Rule Hits: Ham
3498    ---------------------------------------------------------------------------
3499    Rank     Hits    % Msgs   % Spam    % Ham      Score Rule
3500    ----     ----    ------   ------    -----      ----- ----
3501       1        5     9.26%    2.13%   71.43%      0.001 STOX_REPLY_TYPE
3502       2        4     7.41%    0.00%   57.14%     -0.001 SPF_PASS
3503       3        4     7.41%    6.38%   57.14%          - AWL
3504       4        1     1.85%    0.00%   14.29%      0.303 TVD_RCVD_SINGLE
3505       5        1     1.85%   25.53%   14.29%        0.1 RDNS_DYNAMIC
3506    ...
3507    ===========================================================================
3508 =cut
3509 sub printSARulesReport {
3510    return unless (keys %{$Counts{'sarules'}});
3511
3512    our $maxlen = 0;
3513
3514    sub getSAHitsReport($ $) {
3515       my ($type, $topn) = @_;
3516       my $i = 1;
3517       my @report = ();
3518
3519       return if ($topn eq '0');     # topn can be numeric, or the string "all"
3520
3521       for (sort { $Counts{'sarules'}{$type}{$b} <=> $Counts{'sarules'}{$type}{$a} } keys %{$Counts{'sarules'}{$type}}) {
3522
3523          # only show top n lines; all when topn is "all"
3524          if ($topn ne 'all' and $i > $topn) {
3525             push @report, "...\n";
3526             last;
3527          }
3528          my $n     = $Counts{'sarules'}{$type}{$_};
3529          my $nham  = $Counts{'sarules'}{'Ham'}{$_};
3530          my $nspam = $Counts{'sarules'}{'Spam'}{$_};
3531          # rank, count, % msgs, % spam, % ham
3532          push @report, sprintf "%4d %8d   %6.2f%%  %6.2f%%  %6.2f%%     %s\n",
3533             $i++,
3534             $n,
3535             $Totals{'totalmsgs'} == 0 ? 0 : 100.0 * $n     / $Totals{'totalmsgs'},
3536             $Totals{'totalspam'} == 0 ? 0 : 100.0 * $nspam / $Totals{'totalspam'},
3537             $Totals{'totalham'}  == 0 ? 0 : 100.0 * $nham  / $Totals{'totalham'},
3538             $_;
3539          my $len = length($report[-1]) - 1;
3540          $maxlen = $len  if ($len > $maxlen);
3541       }
3542
3543       if (scalar @report) {
3544          print "\n", $sep1 x $maxlen, "\n";
3545          print "SpamAssassin Rule Hits: $type\n";
3546          print $sep2 x $maxlen, "\n";
3547          print "Rank     Hits    % Msgs   % Spam    % Ham      Score Rule\n";
3548          print "----     ----    ------   ------    -----      ----- ----\n";
3549          print @report;
3550          print $sep1 x $maxlen, "\n";
3551       }
3552    }
3553
3554    my ($def_limit_spam, $def_limit_ham) = split /[\s,]+/, $Defaults{'sarules'};
3555    my ($limit_spam, $limit_ham)         = split /[\s,]+/, $Opts{'sarules'};
3556    $limit_spam = $def_limit_spam    if $limit_spam eq '';
3557    $limit_ham  = $def_limit_ham     if $limit_ham  eq '';
3558
3559    getSAHitsReport('Spam', $limit_spam);
3560    getSAHitsReport('Ham',  $limit_ham);
3561 }
3562
3563 # Autolearn report, only available if enabled in amavis $log_templ template
3564 #
3565 =pod
3566    ======================================================================
3567    Autolearn          Msgs      Spam       Ham   % Msgs   % Spam    % Ham
3568    ----------------------------------------------------------------------
3569    Spam                 36        36         0   66.67%   76.60%    0.00%
3570    Ham                   2         0         2    3.70%    0.00%   28.57%
3571    No                    7         4         3   12.96%    8.51%   42.86%
3572    Disabled              6         6         0   11.11%   12.77%    0.00%
3573    Failed                2         1         1    3.70%    2.13%   14.29%
3574    ----------------------------------------------------------------------
3575    Totals               53        47         6   98.15%  100.00%   85.71%
3576    ======================================================================
3577 =cut
3578 sub printAutolearnReport {
3579    #print "printAutolearnReport:\n"    if ($Opts{'debug'});
3580    return unless (keys %{$Counts{'autolearn'}});
3581
3582    our $maxlen = 0;
3583    our ($nhamtotal, $nspamtotal);
3584
3585    sub getAutolearnReport($) {
3586       my ($type) = @_;
3587       my @report = ();
3588
3589       #  SA 2.5/2.6 : ham/spam/no
3590       #  SA 3.0+    : ham/spam/no/disabled/failed/unavailable
3591       for (qw(spam ham no disabled failed unavailable)) {
3592
3593          next unless (exists $Counts{'autolearn'}{'Spam'}{$_} or exists $Counts{'autolearn'}{'Ham'}{$_});
3594          #print "printAutolearnReport: type: $_\n"    if ($Opts{'debug'});
3595
3596          my $nham  = exists $Counts{'autolearn'}{'Ham'}{$_}  ? $Counts{'autolearn'}{'Ham'}{$_}  : 0;
3597          my $nspam = exists $Counts{'autolearn'}{'Spam'}{$_} ? $Counts{'autolearn'}{'Spam'}{$_} : 0;
3598          my $nboth = $nham + $nspam;
3599          $nhamtotal += $nham; $nspamtotal += $nspam;
3600          # type, nspam, nham, % msgs, % spam, % ham
3601          push @report, sprintf "%-13s %9d %9d %9d  %6.2f%%  %6.2f%%  %6.2f%%\n",
3602             ucfirst $_,
3603             $nspam + $nham,
3604             $nspam,
3605             $nham,
3606             $Totals{'totalmsgs'} == 0 ? 0 : 100.0 * $nboth / $Totals{'totalmsgs'},
3607             $Totals{'totalspam'} == 0 ? 0 : 100.0 * $nspam / $Totals{'totalspam'},
3608             $Totals{'totalham'}  == 0 ? 0 : 100.0 * $nham  / $Totals{'totalham'};
3609
3610          my $len = length($report[-1]) - 1;
3611          $maxlen = $len  if ($len > $maxlen);
3612       }
3613       return @report;
3614    }
3615
3616    my @report_spam = getAutolearnReport('Spam');
3617
3618    if (scalar @report_spam) {
3619       print "\n", $sep1 x $maxlen, "\n";
3620       print "Autolearn          Msgs      Spam       Ham   % Msgs   % Spam    % Ham\n";
3621       print $sep2 x $maxlen, "\n";
3622       print @report_spam;
3623       print $sep2 x $maxlen, "\n";
3624
3625       printf "%-13s %9d %9d %9d  %6.2f%%  %6.2f%%  %6.2f%%\n",
3626             'Totals',
3627             $nspamtotal + $nhamtotal,
3628             $nspamtotal,
3629             $nhamtotal,
3630             $Totals{'totalmsgs'} == 0 ? 0 : 100.0 * ($nspamtotal + $nhamtotal) / $Totals{'totalmsgs'},
3631             $Totals{'totalspam'} == 0 ? 0 : 100.0 * $nspamtotal / $Totals{'totalspam'},
3632             $Totals{'totalham'}  == 0 ? 0 : 100.0 * $nhamtotal  / $Totals{'totalham'};
3633       print $sep1 x $maxlen, "\n";
3634    }
3635 }
3636
3637
3638 # Timings percentiles report, used for amavis message scanning and spamassassin timings
3639 =pod
3640    ========================================================================================================================
3641    Scan Timing Percentiles       % Time    Total (ms)        0%        5%       25%       50%       75%       95%      100%
3642    ------------------------------------------------------------------------------------------------------------------------
3643    AV-scan-2 (3)                 69.23%       7209.00   2392.00   2393.50   2399.50   2407.00   2408.50   2409.70   2410.00
3644    SA check (2)                  19.74%       2056.00    942.00    950.60    985.00   1028.00   1071.00   1105.40   1114.00
3645    SMTP DATA (3)                  5.49%        572.00    189.00    189.20    190.00    191.00    191.50    191.90    192.00
3646    AV-scan-1 (3)                  0.82%         85.00     11.00     12.60     19.00     27.00     37.00     45.00     47.00
3647    ...
3648    ------------------------------------------------------------------------------------------------------------------------
3649    Total                                     10413.00   2771.00   2867.10   3251.50   3732.00   3821.00   3892.20   3910.00
3650    ========================================================================================================================
3651
3652    ========================================================================================================================
3653    SA Timing Percentiles         % Time    Total (ms)        0%        5%       25%       50%       75%       95%      100%
3654    ------------------------------------------------------------------------------------------------------------------------
3655    tests_pri_0 (1)               97.17%       5323.00   5323.00   5323.00   5323.00   5323.00   5323.00   5323.00   5323.00
3656    check_razor2 (1)              91.68%       5022.00   5022.00   5022.00   5022.00   5022.00   5022.00   5022.00   5022.00
3657    check_dcc (1)                  3.50%        192.00    192.00    192.00    192.00    192.00    192.00    192.00    192.00
3658    learn (1)                      0.66%         36.00     36.00     36.00     36.00     36.00     36.00     36.00     36.00
3659    tests_pri_-1000 (1)            0.46%         25.00     25.00     25.00     25.00     25.00     25.00     25.00     25.00
3660    ...
3661    ------------------------------------------------------------------------------------------------------------------------
3662    Total                                      5478.00   5478.00   5478.00   5478.00   5478.00   5478.00   5478.00   5478.00
3663    ========================================================================================================================
3664 =cut
3665 sub printTimingsReport($$$$) {
3666    my ($title, $timingsref, $totalsref, $cutoff) = @_;
3667    my @tkeys = keys %$timingsref;
3668    return unless scalar @tkeys;
3669
3670    my (@p, @sorted, %perkey_totals, @col_subtotals);
3671    my ($pcnt,$max_pcnt,$max_rows,$time_total_actual,$time_total_hypo,$subtotal_pcnt);
3672    my @percents = split /[\s,]+/, $Opts{'timings_percentiles'};
3673    my $header_footer = $sep1 x 50 . ($sep1 x 10) x @percents;
3674    my $header_end    = $sep2 x 50 . ($sep2 x 10) x @percents;
3675    my $title_width = '-28';
3676
3677    print "\n$header_footer\n";
3678    printf "%${title_width}s  %6s %13s" ." %8s%%" x @percents , $title, "% Time", "Total (ms)", @percents;
3679    print "\n$header_end\n";
3680
3681    # Sum the total time for each timing key
3682    foreach my $key (@tkeys) {
3683       foreach my $timeval (@{$$timingsref{$key}}) {
3684          $perkey_totals{$key} += $timeval;
3685       }
3686    }
3687
3688    # Sum total time spent scanning
3689    map {$time_total_actual += $_} @$totalsref;
3690
3691    # cutoff value used to limit the number of rows of output
3692    #   positive cutoff is a percentage of cummulative time
3693    #   negative cutoff limits number of rows
3694    if ($cutoff >= 0) {
3695       $max_pcnt = $cutoff != 100 ? $cutoff : 150;  # 150% avoids roundoff errors
3696    }
3697    else {
3698       $max_rows = -$cutoff;
3699    }
3700    my $rows = 0;
3701    # sort each timing key's values, required to compute the list of percentiles
3702    for (sort { $perkey_totals{$b} <=> $perkey_totals{$a} } @tkeys) {
3703       last if (($max_rows and $rows >= $max_rows) or ($max_pcnt and $subtotal_pcnt >= $max_pcnt));
3704
3705       $pcnt = ($perkey_totals{$_} / $time_total_actual) * 100,
3706       @sorted = sort { $a <=> $b } @{$$timingsref{$_}};
3707       @p = get_percentiles (@sorted, @percents);
3708
3709       $subtotal_pcnt += $pcnt;
3710       printf "%${title_width}s %6.2f%% %13.2f" . " %9.2f" x scalar (@p) . "\n",
3711                $_ .  ' (' . scalar(@{$$timingsref{$_}}) . ')', # key ( number of elements )
3712                $pcnt,                                          # percent of total time
3713                #$perkey_totals{$_} / 1000,                     # total time for this test
3714                $perkey_totals{$_},                             # total time for this test
3715                #map {$_ / 1000} @p;                            # list of percentiles
3716                @p;                                             # list of percentiles
3717       $rows++;
3718    }
3719    print "...\n"  if ($rows != scalar @tkeys);
3720
3721    print "$header_end\n";
3722    # actual total time as reported by amavis
3723    @sorted = sort { $a <=> $b } @$totalsref;
3724    @p = get_percentiles (@sorted, @percents);
3725    printf "%${title_width}s         %13.2f" . " %9.2f" x scalar (@p) . "\n",
3726             'Total',
3727             #$time_total_actual / 1000,
3728             $time_total_actual,
3729             #map {$_ / 1000} @p;
3730              @p;
3731
3732    print "$header_footer\n";
3733 }
3734
3735 # Most recent startup info report
3736 #
3737 sub printStartupInfoReport {
3738
3739    return unless (keys %StartInfo);
3740
3741    sub print2col($ $) {
3742       my ($label,$val) = @_;
3743       printf "%-50s %s\n", $label, $val;
3744    }
3745
3746    print "\nAmavis Startup\n";
3747
3748    print2col ("    Amavis",       $StartInfo{'ampath'})             if (exists $StartInfo{'ampath'});
3749    print2col ("        Version",  $StartInfo{'amversion'})          if (exists $StartInfo{'amversion'});
3750    print2col ("        PID",      $StartInfo{'Server'}{'pid'})      if (exists $StartInfo{'Server'}{'pid'});
3751    print2col ("        Socket",   $StartInfo{'Server'}{'socket'})   if (exists $StartInfo{'Server'}{'socket'});
3752    print2col ("        TCP port", $StartInfo{'Server'}{'ip'})       if (exists $StartInfo{'Server'}{'ip'});
3753    print2col ("        UID",      $StartInfo{'Server'}{'uid'})      if (exists $StartInfo{'Server'}{'uid'});
3754    print2col ("        GID",      $StartInfo{'Server'}{'gid'})      if (exists $StartInfo{'Server'}{'gid'});
3755    print2col ("        Logging",  $StartInfo{'Logging'})            if (exists $StartInfo{'Logging'});
3756    print2col ("        Configuration Files",  $StartInfo{'Configs'})            if (exists $StartInfo{'Configs'});
3757    print2col ("    SpamAssassin", $StartInfo{'sa_version'})         if (exists $StartInfo{'sa_version'});
3758    print2col ("    SpamAssassin Debug Facilities", $StartInfo{'sa_debug'})     if (exists $StartInfo{'sa_debug'});
3759    print2col ("    Database",     $StartInfo{'db'})                 if (exists $StartInfo{'db'});
3760    #if (keys %{$StartInfo{'IDs'}}) {
3761    #   print "    Process startup user/group:\n";
3762    #   print "        User:  $StartInfo{'IDs'}{'user'}, EUID: $StartInfo{'IDs'}{'euid'}, UID: $StartInfo{'IDs'}{'uid'}\n";
3763    #   print "        Group: $StartInfo{'IDs'}{'group'}, EGID: $StartInfo{'IDs'}{'egid'}, GID: $StartInfo{'IDs'}{'gid'}\n";
3764    #}
3765
3766    sub print_modules ($ $) {
3767       my ($key, $label) = @_;
3768       print "    $label\n";
3769       foreach (sort keys %{$StartInfo{$key}}) {
3770          print "        $_\n";
3771          foreach my $module (sort keys %{$StartInfo{$key}{$_}}) {
3772             if ($StartInfo{$key}{$_}{$module}) {
3773                print2col ("            " . $module, $StartInfo{$key}{$_}{$module});
3774             }
3775             else {
3776                print2col ("            " . $module, "");
3777             }
3778          }
3779       }
3780    };
3781    print_modules('AVScanner', 'Antivirus scanners');
3782    print_modules('Code',      'Code, modules and external programs');
3783    print_modules('Decoders',  'Decoders');
3784    print_modules('SAPlugins', 'SpamAssassin plugins');
3785 }
3786
3787 # Initialize the Getopts option list.  Requires the Section table to
3788 # be built already.
3789 #
3790 sub init_getopts_table() {
3791    print "init_getopts_table: enter\n"  if $Opts{'debug'} & D_ARGS;
3792
3793    init_getopts_table_common(@supplemental_reports);
3794
3795    add_option ('first_recip_only!');
3796    add_option ('show_first_recip_only=i',   sub { $Opts{'first_recip_only'} = $_[1]; 1;});
3797    add_option ('startinfo!');
3798    add_option ('show_startinfo=i',          sub { $Opts{'startinfo'} = $_[1]; 1; });
3799    add_option ('by_ccat_summary!');
3800    add_option ('show_by_ccat_summary=i',    sub { $Opts{'by_ccat_summary'} = $_[1]; 1; });
3801    add_option ('noscore_percentiles',       \&triway_opts);
3802    add_option ('score_percentiles=s',       \&triway_opts);
3803    add_option ('noscore_frequencies',       \&triway_opts);
3804    add_option ('score_frequencies=s',       \&triway_opts);
3805    add_option ('nosa_timings',              sub { $Opts{'sa_timings'} = 0; 1; });
3806    add_option ('sa_timings=i');
3807    add_option ('sa_timings_percentiles=s');
3808    add_option ('notimings',                 sub { $Opts{'timings'} = 0; 1; });
3809    add_option ('timings=i');
3810    add_option ('timings_percentiles=s');
3811    add_option ('nosarules',                 \&triway_opts);
3812    add_option ('sarules=s',                 \&triway_opts);
3813    #add_option ('nop0f',                     \&triway_opts);
3814    #add_option ('p0f=s',                     \&triway_opts);
3815    add_option ('autolearn!');
3816    add_option ('show_autolearn=i',          sub { $Opts{'autolearn'} = $_[1]; 1; });
3817 }
3818
3819 # Builds the entire @Section table used for data collection
3820 #
3821 # Each Section entry has as many as six fields:
3822 #
3823 #   1. Section array reference
3824 #   2. Key to %Counts, %Totals accumulator hashes, and %Collecting hash
3825 #   3. Output in Detail report? (must also a %Counts accumulator)
3826 #   4. Numeric output format specifier for Summary report
3827 #   5. Section title for Summary and Detail reports
3828 #   6. A hash to a divisor used to calculate the percentage of a total for that key
3829 #
3830 # Use begin_section_group/end_section_group to create groupings around sections.
3831 #
3832 # Sections can be freely reordered if desired, but maintain proper group nesting.
3833 #
3834 sub build_sect_table() {
3835    print "build_sect_table: enter\n"  if $Opts{'debug'} & D_SECT;
3836    my $S = \@Sections;
3837
3838    # References to these are used in the Sections table below; we'll predeclare them.
3839    $Totals{'totalmsgs'} = 0;
3840
3841    # Place configuration and critical errors first
3842
3843    #    SECTIONREF, NAME,                 DETAIL, FMT, TITLE,                             DIVISOR
3844    begin_section_group ($S, 'warnings');
3845    add_section ($S, 'fatal',                   1, 'd', '*Fatal');
3846    add_section ($S, 'panic',                   1, 'd', '*Panic');
3847    add_section ($S, 'warningsecurity',         1, 'd', '*Warning: Security risk');
3848    add_section ($S, 'avtimeout',               1, 'd', '*Warning: Virus scanner timeout');
3849    add_section ($S, 'avconnectfailure',        1, 'd', '*Warning: Virus scanner connection failure');
3850    add_section ($S, 'warningsmtpshutdown',     1, 'd', '*Warning: SMTP shutdown');
3851    add_section ($S, 'warningsql',              1, 'd', '*Warning: SQL problem');
3852    add_section ($S, 'warningaddressmodified',  1, 'd', '*Warning: Email address modified');
3853    add_section ($S, 'warningnoquarantineid',   1, 'd', '*Warning: Message missing X-Quarantine-ID header');
3854    add_section ($S, 'warning',                 1, 'd', 'Miscellaneous warnings');
3855    end_section_group ($S, 'warnings');
3856
3857    begin_section_group ($S, 'scanned', "\n");
3858    add_section ($S, 'totalmsgs',               0, 'd', [ 'Total messages scanned', '-' ],  \$Totals{'totalmsgs'});
3859    add_section ($S, 'bytesscanned',            0, 'Z', 'Total bytes scanned');     # Z means print scaled as in 1k, 1m, etc.
3860    end_section_group ($S, 'scanned', $sep1);
3861
3862    # Blocked / Passed
3863    # Priority: VIRUS BANNED UNCHECKED SPAM SPAMMY BADH OVERSIZED MTA CLEAN
3864    begin_section_group ($S, 'passblock', "\n");
3865    begin_section_group ($S, 'blocked', "\n");
3866    add_section ($S, 'totalblocked',            0, 'd', [ 'Blocked', '-' ],                 \$Totals{'totalmsgs'});
3867    add_section ($S, 'malwareblocked',          1, 'd', '  Malware blocked',                \$Totals{'totalmsgs'});
3868    add_section ($S, 'bannednameblocked',       1, 'd', '  Banned name blocked',            \$Totals{'totalmsgs'});
3869    add_section ($S, 'uncheckedblocked',        1, 'd', '  Unchecked blocked',              \$Totals{'totalmsgs'});
3870    add_section ($S, 'spamblocked',             1, 'd', '  Spam blocked',                   \$Totals{'totalmsgs'});
3871    add_section ($S, 'spamdiscarded',           0, 'd', '  Spam discarded (no quarantine)', \$Totals{'totalmsgs'});
3872    add_section ($S, 'spammyblocked',           1, 'd', '  Spammy blocked',                 \$Totals{'totalmsgs'});
3873    add_section ($S, 'badheaderblocked',        1, 'd', '  Bad header blocked',             \$Totals{'totalmsgs'});
3874    add_section ($S, 'oversizedblocked',        1, 'd', '  Oversized blocked',              \$Totals{'totalmsgs'});
3875    add_section ($S, 'mtablocked',              1, 'd', '  MTA blocked',                    \$Totals{'totalmsgs'});
3876    add_section ($S, 'cleanblocked',            1, 'd', '  Clean blocked',                  \$Totals{'totalmsgs'});
3877    add_section ($S, 'tempfailblocked',         1, 'd', '  Tempfail blocked',               \$Totals{'totalmsgs'});
3878    add_section ($S, 'otherblocked',            1, 'd', '  Other blocked',                  \$Totals{'totalmsgs'});
3879    end_section_group ($S, 'blocked');
3880
3881    begin_section_group ($S, 'passed', "\n");
3882    add_section ($S, 'totalpassed',             0, 'd', [ 'Passed', '-' ],                  \$Totals{'totalmsgs'});
3883    add_section ($S, 'malwarepassed',           1, 'd', '  Malware passed',                 \$Totals{'totalmsgs'});
3884    add_section ($S, 'bannednamepassed',        1, 'd', '  Banned name passed',             \$Totals{'totalmsgs'});
3885    add_section ($S, 'uncheckedpassed',         1, 'd', '  Unchecked passed',               \$Totals{'totalmsgs'});
3886    add_section ($S, 'spampassed',              1, 'd', '  Spam passed',                    \$Totals{'totalmsgs'});
3887    add_section ($S, 'spammypassed',            1, 'd', '  Spammy passed',                  \$Totals{'totalmsgs'});
3888    add_section ($S, 'badheaderpassed',         1, 'd', '  Bad header passed',              \$Totals{'totalmsgs'});
3889    add_section ($S, 'oversizedpassed',         1, 'd', '  Oversized passed',               \$Totals{'totalmsgs'});
3890    add_section ($S, 'mtapassed',               1, 'd', '  MTA passed',                     \$Totals{'totalmsgs'});
3891    add_section ($S, 'cleanpassed',             1, 'd', '  Clean passed',                   \$Totals{'totalmsgs'});
3892    add_section ($S, 'tempfailpassed',          1, 'd', '  Tempfail passed',                \$Totals{'totalmsgs'});
3893    add_section ($S, 'otherpassed',             1, 'd', '  Other passed',                   \$Totals{'totalmsgs'});
3894    end_section_group ($S, 'passed');
3895    end_section_group ($S, 'passblock', $sep1);
3896
3897    if ($Opts{'by_ccat_summary'}) {
3898       # begin level 1 group
3899       begin_section_group ($S, 'by_ccat', "\n");
3900
3901       # begin level 2 groupings
3902       begin_section_group ($S, 'malware', "\n");     # level 2
3903       add_section ($S, 'totalmalware',            0, 'd', [ 'Malware', '-' ],                 \$Totals{'totalmsgs'});
3904       add_section ($S, 'malwarepassed',           0, 'd', '  Malware passed',                 \$Totals{'totalmsgs'});
3905       add_section ($S, 'malwareblocked',          0, 'd', '  Malware blocked',                \$Totals{'totalmsgs'});
3906       end_section_group ($S, 'malware');
3907
3908       begin_section_group ($S, 'banned', "\n");
3909       add_section ($S, 'totalbanned',             0, 'd', [ 'Banned', '-' ],                  \$Totals{'totalmsgs'});
3910       add_section ($S, 'bannednamepassed',        0, 'd', '  Banned file passed',             \$Totals{'totalmsgs'});
3911       add_section ($S, 'bannednameblocked',       0, 'd', '  Banned file blocked',            \$Totals{'totalmsgs'});
3912       end_section_group ($S, 'banned');
3913
3914       begin_section_group ($S, 'unchecked', "\n");
3915       add_section ($S, 'totalunchecked',          0, 'd', [ 'Unchecked', '-' ],               \$Totals{'totalmsgs'});
3916       add_section ($S, 'uncheckedpassed',         0, 'd', '  Unchecked passed',               \$Totals{'totalmsgs'});
3917       add_section ($S, 'uncheckedblocked',        0, 'd', '  Unchecked blocked',              \$Totals{'totalmsgs'});
3918       end_section_group ($S, 'unchecked');
3919
3920       begin_section_group ($S, 'spam', "\n");
3921       add_section ($S, 'totalspam',               0, 'd', [ 'Spam', '-' ],                    \$Totals{'totalmsgs'});
3922       add_section ($S, 'spammypassed',            0, 'd', '  Spammy passed',                  \$Totals{'totalmsgs'});
3923       add_section ($S, 'spammyblocked',           0, 'd', '  Spammy blocked',                 \$Totals{'totalmsgs'});
3924       add_section ($S, 'spampassed',              0, 'd', '  Spam passed',                    \$Totals{'totalmsgs'});
3925       add_section ($S, 'spamblocked',             0, 'd', '  Spam blocked',                   \$Totals{'totalmsgs'});
3926       add_section ($S, 'spamdiscarded',           0, 'd', '  Spam discarded (no quarantine)', \$Totals{'totalmsgs'});
3927       end_section_group ($S, 'spam');
3928
3929       begin_section_group ($S, 'ham', "\n");
3930       add_section ($S, 'totalham',                0, 'd', [ 'Ham', '-' ],                     \$Totals{'totalmsgs'});
3931       add_section ($S, 'badheaderpassed',         0, 'd', '  Bad header passed',              \$Totals{'totalmsgs'});
3932       add_section ($S, 'badheaderblocked',        0, 'd', '  Bad header blocked',             \$Totals{'totalmsgs'});
3933       add_section ($S, 'oversizedpassed',         0, 'd', '  Oversized passed',               \$Totals{'totalmsgs'});
3934       add_section ($S, 'oversizedblocked',        0, 'd', '  Oversized blocked',              \$Totals{'totalmsgs'});
3935       add_section ($S, 'mtapassed',               0, 'd', '  MTA passed',                     \$Totals{'totalmsgs'});
3936       add_section ($S, 'mtablocked',              0, 'd', '  MTA blocked',                    \$Totals{'totalmsgs'});
3937       add_section ($S, 'cleanpassed',             0, 'd', '  Clean passed',                   \$Totals{'totalmsgs'});
3938       add_section ($S, 'cleanblocked',            0, 'd', '  Clean blocked',                  \$Totals{'totalmsgs'});
3939       end_section_group ($S, 'ham');
3940
3941       begin_section_group ($S, 'other', "\n");
3942       add_section ($S, 'totalother',              0, 'd', [ 'Other', '-' ],                   \$Totals{'totalmsgs'});
3943       add_section ($S, 'tempfailpassed',          0, 'd', '  Tempfail passed',                \$Totals{'totalmsgs'});
3944       add_section ($S, 'tempfailblocked',         0, 'd', '  Tempfail blocked',               \$Totals{'totalmsgs'});
3945       add_section ($S, 'otherpassed',             0, 'd', '  Other passed',                   \$Totals{'totalmsgs'});
3946       add_section ($S, 'otherblocked',            0, 'd', '  Other blocked',                  \$Totals{'totalmsgs'});
3947       end_section_group ($S, 'other');
3948       # end level 2 groupings
3949
3950       # end level 1 group
3951       end_section_group ($S, 'by_ccat', $sep1);
3952    }
3953
3954    begin_section_group ($S, 'misc', "\n");
3955    add_section ($S, 'virusscanskipped',        1, 'd', 'Virus scan skipped');
3956    add_section ($S, 'sabypassed',              0, 'd', 'SpamAssassin bypassed');
3957    add_section ($S, 'satimeout',               0, 'd', 'SpamAssassin timeout');
3958    add_section ($S, 'released',                1, 'd', 'Released from quarantine');
3959    add_section ($S, 'defanged',                1, 'd', 'Defanged');
3960    add_section ($S, 'truncatedheader',         0, 'd', 'Truncated headers > 998 characters');
3961    add_section ($S, 'truncatedmsg',            0, 'd', 'Truncated message passed to SpamAssassin');
3962    add_section ($S, 'tagged',                  0, 'd', 'Spam tagged');
3963    add_section ($S, 'smtpresponse',            1, 'd', 'SMTP response');
3964    add_section ($S, 'badaddress',              1, 'd', 'Bad address syntax');
3965    add_section ($S, 'fakesender',              1, 'd', 'Fake sender');
3966    add_section ($S, 'archiveextract',          1, 'd', 'Archive extraction problem');
3967    add_section ($S, 'dsnsuppressed',           1, 'd', 'DSN suppressed');
3968    add_section ($S, 'dsnnotification',         1, 'd', 'DSN notification (debug supplemental)');
3969    add_section ($S, 'bouncekilled',            1, 'd', 'Bounce killed');
3970    add_section ($S, 'bouncerescued',           1, 'd', 'Bounce rescued');
3971    add_section ($S, 'bounceunverifiable',      1, 'd', 'Bounce unverifiable');
3972    add_section ($S, 'nosubject',               0, 'd', 'Subject header inserted');
3973    add_section ($S, 'whitelisted',             1, 'd', 'Whitelisted');
3974    add_section ($S, 'blacklisted',             1, 'd', 'Blacklisted');
3975    add_section ($S, 'penpalsaved',             1, 'd', 'Penpals saved from kill');
3976    add_section ($S, 'tmppreserved',            1, 'd', 'Preserved temporary directory');
3977    add_section ($S, 'dccerror',                1, 'd', 'DCC error');
3978    add_section ($S, 'mimeerror',               1, 'd', 'MIME error');
3979    add_section ($S, 'defangerror',             1, 'd', 'Defang error');
3980    add_section ($S, 'badheadersupp',           1, 'd', 'Bad header (debug supplemental)');
3981    add_section ($S, 'fileoutputskipped',       0, 'd', 'File(1) output skipped');
3982    add_section ($S, 'localdeliveryskipped',    1, 'd', 'Local delivery skipped');
3983    add_section ($S, 'extramodules',            1, 'd', 'Extra code modules loaded at runtime');
3984    add_section ($S, 'malwarebyscanner',        1, 'd', 'Malware by scanner');
3985    add_section ($S, 'malwaretospam',           1, 'd', 'Malware to spam conversion');
3986    add_section ($S, 'contenttype',             1, 'd', 'Content types');
3987    add_section ($S, 'bayes',                   1, 'd', 'Bayes probability');
3988    add_section ($S, 'p0f',                     1, 'd', 'p0f fingerprint');
3989    add_section ($S, 'sadiags',                 1, 'd', 'SpamAssassin diagnostics');
3990    end_section_group ($S, 'misc');
3991
3992    print "build_sect_table: exit\n"  if $Opts{'debug'} & D_SECT;
3993 }
3994
3995 # XXX create array of defaults for detail <5, 5-9, >10
3996 sub init_defaults() {
3997    map { $Opts{$_} = $Defaults{$_} unless exists $Opts{$_} } keys %Defaults;
3998    if (! $Opts{'standalone'}) {
3999       # LOGWATCH these take affect if no env present (eg. nothing in conf file)
4000       #  0 to 4 nostartinfo, notimings,   nosarules,        score_frequencies=0,        score_percentiles=0,      noautolearn
4001       #  5 to 9 nostartinfo, timings=95,  sarules = 20 20,  score_frequencies=defaults, score_percentiles=defaults, autolearn
4002       # 10 +    startinfo,   timings=100, sarules = all all score_frequencies=defaults, score_percentiles=defaults, autolearn
4003
4004       if ($Opts{'detail'} < 5) {          # detail 0 to 4, disable all supplimental reports
4005          $Opts{'autolearn'}         = 0;
4006          #$Opts{'p0f'}               = 0;
4007          $Opts{'timings'}           = 0;
4008          $Opts{'sa_timings'}        = 0;
4009          $Opts{'sarules'}           = 0;
4010          $Opts{'startinfo'}         = 0;
4011          $Opts{'score_frequencies'} = '';
4012          $Opts{'score_percentiles'} = '';
4013       }
4014       elsif ($Opts{'detail'} < 10) {      # detail 5 to 9, disable startinfo report
4015          $Opts{'startinfo'}         = 0;
4016       }
4017       else {                              # detail 10 and up, full reports
4018          #$Opts{'p0f'}              = 'all all';
4019          $Opts{'timings'}          = 100;
4020          $Opts{'sa_timings'}       = 100;
4021          $Opts{'sarules'}          = 'all all';
4022       }
4023    }
4024 }
4025
4026 # Return a usage string,  built from:
4027 #  arg1 +
4028 #  $usage_str +
4029 #  a string built from each usable entry in the @Sections table.
4030 #
4031 sub usage($) {
4032    my $ret = "";
4033    $ret = "@_\n"  if ($_[0]);
4034    $ret .= $usage_str;
4035    my ($name, $desc);
4036    foreach my $sect (get_usable_sectvars(@Sections, 0)) {
4037       $name = lc $sect->{NAME};
4038       $desc = $sect->{TITLE};
4039       $ret .= sprintf "   --%-38s%s\n", "$name" . ' LEVEL', "$desc";
4040    }
4041    $ret .= "\n";
4042    return $ret;
4043 }
4044
4045 sub strip_trace($) {
4046    # at (eval 37) line 306, <GEN6> line 4.
4047    # at /usr/sbin/amavisd-maia line 2895, <GEN4> line 22.
4048    #$_[0] =~ s/ at \(.+\) line \d+(?:, \<GEN\d+\> line \d+)?\.$//;
4049    #$_[0] =~ s/ at (\S+) line \d+(?:, \<GEN\d+\> line \d+)?\.$/: $1/;
4050    while ($_[0] =~ s/ at (?:\(eval \d+\)|\S+) line \d+(?:, \<GEN\d+\> line \d+)?\.//) {
4051       ;
4052    }
4053    #print "strip_trace: \"$_[0]\"\n";
4054    return $_[0];
4055 }
4056
4057 # Getopt helper, sets an option in Opts hash to one of three
4058 # values: its default, the specified value, or 0 if the option
4059 # was the "no" prefixed variant.
4060 #
4061 sub triway_opts ($ $) {
4062    my ($opt,$val) = @_;
4063
4064    print "triway_opts: OPT: $opt, VAL: $val\n"    if $Opts{'debug'} & D_ARGS;
4065    die "Option \"--${opt}\" requires an argument" if ($val =~ /^--/);
4066
4067    if ($opt =~ s/^no//i) {
4068       $Opts{$opt} = 0;
4069    } elsif ('default' =~ /^${val}$/i) {
4070       $Opts{$opt} = $Defaults{$opt};
4071    }
4072    else {
4073       $Opts{$opt} = $val;
4074    }
4075 }
4076
4077 exit(0);
4078
4079 # vi: shiftwidth=3 tabstop=3 syntax=perl et