module Tests.Cube
where
-import Test.QuickCheck
+import Prelude hiding (LT)
+import Cardinal
import Comparisons
-import Cube
-import FunctionValues (FunctionValues)
-import Tests.FunctionValues ()
-import Tetrahedron (b0, b1, b2, b3, c,
- Tetrahedron(Tetrahedron),
+import Cube hiding (i, j, k)
+import FunctionValues
+import Misc (all_equal, disjoint)
+import Tetrahedron (b0, b1, b2, b3, c, fv,
v0, v1, v2, v3, volume)
-instance Arbitrary Cube where
- arbitrary = do
- (Positive h') <- arbitrary :: Gen (Positive Double)
- i' <- choose (coordmin, coordmax)
- j' <- choose (coordmin, coordmax)
- k' <- choose (coordmin, coordmax)
- fv' <- arbitrary :: Gen FunctionValues
- return (Cube h' i' j' k' fv')
- where
- coordmin = -268435456 -- -(2^29 / 2)
- coordmax = 268435456 -- +(2^29 / 2)
-
-- Quickcheck tests.
--- | Since the grid size is necessarily positive, all tetrahedrons
+prop_opposite_octant_tetrahedra_disjoint1 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint1 c =
+ disjoint (front_left_top_tetrahedra c) (front_right_down_tetrahedra c)
+
+prop_opposite_octant_tetrahedra_disjoint2 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint2 c =
+ disjoint (back_left_top_tetrahedra c) (back_right_down_tetrahedra c)
+
+prop_opposite_octant_tetrahedra_disjoint3 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint3 c =
+ disjoint (front_left_top_tetrahedra c) (back_right_top_tetrahedra c)
+
+prop_opposite_octant_tetrahedra_disjoint4 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint4 c =
+ disjoint (front_left_down_tetrahedra c) (back_right_down_tetrahedra c)
+
+prop_opposite_octant_tetrahedra_disjoint5 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint5 c =
+ disjoint (front_left_top_tetrahedra c) (back_left_down_tetrahedra c)
+
+prop_opposite_octant_tetrahedra_disjoint6 :: Cube -> Bool
+prop_opposite_octant_tetrahedra_disjoint6 c =
+ disjoint (front_right_top_tetrahedra c) (back_right_down_tetrahedra c)
+
+
+-- | Since the grid size is necessarily positive, all tetrahedra
-- (which comprise cubes of positive volume) must have positive volume
-- as well.
prop_all_volumes_positive :: Cube -> Bool
-prop_all_volumes_positive c =
+prop_all_volumes_positive cube =
null nonpositive_volumes
where
- ts = tetrahedrons c
+ ts = tetrahedra cube
volumes = map volume ts
nonpositive_volumes = filter (<= 0) volumes
-- | In fact, since all of the tetrahedra are identical, we should
-- already know their volumes. There's 24 tetrahedra to a cube, so
-- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron0_volumes_exact :: Cube -> Bool
-prop_tetrahedron0_volumes_exact c =
- volume (tetrahedron0 c) ~= (1/24)*(delta^(3::Int))
+prop_all_volumes_exact :: Cube -> Bool
+prop_all_volumes_exact cube =
+ and [volume t ~~= (1/24)*(delta^(3::Int)) | t <- tetrahedra cube]
where
- delta = h c
+ delta = h cube
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron1_volumes_exact :: Cube -> Bool
-prop_tetrahedron1_volumes_exact c =
- volume (tetrahedron1 c) ~= (1/24)*(delta^(3::Int))
+-- | All tetrahedron should have their v0 located at the center of the cube.
+prop_v0_all_equal :: Cube -> Bool
+prop_v0_all_equal cube = (v0 t0) == (v0 t1)
where
- delta = h c
+ t0 = head (tetrahedra cube) -- Doesn't matter which two we choose.
+ t1 = head $ tail (tetrahedra cube)
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron2_volumes_exact :: Cube -> Bool
-prop_tetrahedron2_volumes_exact c =
- volume (tetrahedron2 c) ~= (1/24)*(delta^(3::Int))
- where
- delta = h c
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron3_volumes_exact :: Cube -> Bool
-prop_tetrahedron3_volumes_exact c =
- volume (tetrahedron3 c) ~= (1/24)*(delta^(3::Int))
- where
- delta = h c
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Note that the
+-- third and fourth indices of c-t1 have been switched. This is
+-- because we store the triangles oriented such that their volume is
+-- positive. If T and T-tilde share \<v0,v1,v2\> and v3,v3-tilde point
+-- in opposite directions, one of them has to have negative volume!
+prop_c0120_identity1 :: Cube -> Bool
+prop_c0120_identity1 cube =
+ c t0 0 1 2 0 ~= (c t0 0 0 2 1 + c t3 0 0 1 2) / 2
+ where
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron4_volumes_exact :: Cube -> Bool
-prop_tetrahedron4_volumes_exact c =
- volume (tetrahedron4 c) ~= (1/24)*(delta^(3::Int))
- where
- delta = h c
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron5_volumes_exact :: Cube -> Bool
-prop_tetrahedron5_volumes_exact c =
- volume (tetrahedron5 c) ~= (1/24)*(delta^(3::Int))
- where
- delta = h c
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- 'prop_c0120_identity1' with tetrahedrons 1 and 2.
+prop_c0120_identity2 :: Cube -> Bool
+prop_c0120_identity2 cube =
+ c t1 0 1 2 0 ~= (c t1 0 0 2 1 + c t0 0 0 1 2) / 2
+ where
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- 'prop_c0120_identity1' with tetrahedrons 1 and 2.
+prop_c0120_identity3 :: Cube -> Bool
+prop_c0120_identity3 cube =
+ c t2 0 1 2 0 ~= (c t2 0 0 2 1 + c t1 0 0 1 2) / 2
+ where
+ t1 = tetrahedron cube 1
+ t2 = tetrahedron cube 2
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- 'prop_c0120_identity1' with tetrahedrons 2 and 3.
+prop_c0120_identity4 :: Cube -> Bool
+prop_c0120_identity4 cube =
+ c t3 0 1 2 0 ~= (c t3 0 0 2 1 + c t2 0 0 1 2) / 2
+ where
+ t2 = tetrahedron cube 2
+ t3 = tetrahedron cube 3
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron6_volumes_exact :: Cube -> Bool
-prop_tetrahedron6_volumes_exact c =
- volume (tetrahedron6 c) ~= (1/24)*(delta^(3::Int))
- where
- delta = h c
--- | In fact, since all of the tetrahedra are identical, we should
--- already know their volumes. There's 24 tetrahedra to a cube, so
--- we'd expect the volume of each one to be (1/24)*h^3.
-prop_tetrahedron7_volumes_exact :: Cube -> Bool
-prop_tetrahedron7_volumes_exact c =
- volume (tetrahedron7 c) ~= (1/24)*(delta^(3::Int))
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- 'prop_c0120_identity1' with tetrahedrons 4 and 5.
+prop_c0120_identity5 :: Cube -> Bool
+prop_c0120_identity5 cube =
+ c t5 0 1 2 0 ~= (c t5 0 0 2 1 + c t4 0 0 1 2) / 2
where
- delta = h c
+ t4 = tetrahedron cube 4
+ t5 = tetrahedron cube 5
+
+-- -- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- -- 'prop_c0120_identity1' with tetrahedrons 5 and 6.
+prop_c0120_identity6 :: Cube -> Bool
+prop_c0120_identity6 cube =
+ c t6 0 1 2 0 ~= (c t6 0 0 2 1 + c t5 0 0 1 2) / 2
+ where
+ t5 = tetrahedron cube 5
+ t6 = tetrahedron cube 6
--- | All tetrahedron should have their v0 located at the center of the cube.
-prop_v0_all_equal :: Cube -> Bool
-prop_v0_all_equal c = (v0 t0) == (v0 t1)
- where
- t0 = head (tetrahedrons c) -- Doesn't matter which two we choose.
- t1 = head $ tail (tetrahedrons c)
-
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron0_volumes_positive :: Cube -> Bool
-prop_tetrahedron0_volumes_positive c =
- volume (tetrahedron0 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron1_volumes_positive :: Cube -> Bool
-prop_tetrahedron1_volumes_positive c =
- volume (tetrahedron1 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron2_volumes_positive :: Cube -> Bool
-prop_tetrahedron2_volumes_positive c =
- volume (tetrahedron2 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron3_volumes_positive :: Cube -> Bool
-prop_tetrahedron3_volumes_positive c =
- volume (tetrahedron3 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron4_volumes_positive :: Cube -> Bool
-prop_tetrahedron4_volumes_positive c =
- volume (tetrahedron4 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron5_volumes_positive :: Cube -> Bool
-prop_tetrahedron5_volumes_positive c =
- volume (tetrahedron5 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron6_volumes_positive :: Cube -> Bool
-prop_tetrahedron6_volumes_positive c =
- volume (tetrahedron6 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron7_volumes_positive :: Cube -> Bool
-prop_tetrahedron7_volumes_positive c =
- volume (tetrahedron7 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron8_volumes_positive :: Cube -> Bool
-prop_tetrahedron8_volumes_positive c =
- volume (tetrahedron8 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron9_volumes_positive :: Cube -> Bool
-prop_tetrahedron9_volumes_positive c =
- volume (tetrahedron9 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron10_volumes_positive :: Cube -> Bool
-prop_tetrahedron10_volumes_positive c =
- volume (tetrahedron10 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron11_volumes_positive :: Cube -> Bool
-prop_tetrahedron11_volumes_positive c =
- volume (tetrahedron11 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron12_volumes_positive :: Cube -> Bool
-prop_tetrahedron12_volumes_positive c =
- volume (tetrahedron12 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron13_volumes_positive :: Cube -> Bool
-prop_tetrahedron13_volumes_positive c =
- volume (tetrahedron13 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron14_volumes_positive :: Cube -> Bool
-prop_tetrahedron14_volumes_positive c =
- volume (tetrahedron14 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron15_volumes_positive :: Cube -> Bool
-prop_tetrahedron15_volumes_positive c =
- volume (tetrahedron15 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron16_volumes_positive :: Cube -> Bool
-prop_tetrahedron16_volumes_positive c =
- volume (tetrahedron16 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron17_volumes_positive :: Cube -> Bool
-prop_tetrahedron17_volumes_positive c =
- volume (tetrahedron17 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron18_volumes_positive :: Cube -> Bool
-prop_tetrahedron18_volumes_positive c =
- volume (tetrahedron18 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron19_volumes_positive :: Cube -> Bool
-prop_tetrahedron19_volumes_positive c =
- volume (tetrahedron19 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron20_volumes_positive :: Cube -> Bool
-prop_tetrahedron20_volumes_positive c =
- volume (tetrahedron20 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron21_volumes_positive :: Cube -> Bool
-prop_tetrahedron21_volumes_positive c =
- volume (tetrahedron21 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron22_volumes_positive :: Cube -> Bool
-prop_tetrahedron22_volumes_positive c =
- volume (tetrahedron22 c) > 0
-
--- | This pretty much repeats the prop_all_volumes_positive property,
--- but will let me know which tetrahedrons's vertices are disoriented.
-prop_tetrahedron23_volumes_positive :: Cube -> Bool
-prop_tetrahedron23_volumes_positive c =
- volume (tetrahedron23 c) > 0
-
-
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
-prop_c0120_identity1 :: Cube -> Bool
-prop_c0120_identity1 cube =
- c t0 0 1 2 0 ~= (c t0 0 0 2 1 + c t3 0 0 1 2) / 2
+
+-- -- | Given in Sorokina and Zeilfelder, p. 79, (2.6). Repeats
+-- -- 'prop_c0120_identity1' with tetrahedrons 6 and 7.
+prop_c0120_identity7 :: Cube -> Bool
+prop_c0120_identity7 cube =
+ c t7 0 1 2 0 ~= (c t7 0 0 2 1 + c t6 0 0 1 2) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t6 = tetrahedron cube 6
+ t7 = tetrahedron cube 7
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). See
+-- 'prop_c0120_identity1'.
prop_c0210_identity1 :: Cube -> Bool
prop_c0210_identity1 cube =
c t0 0 2 1 0 ~= (c t0 0 1 1 1 + c t3 0 1 1 1) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). See
+-- 'prop_c0120_identity1'.
prop_c0300_identity1 :: Cube -> Bool
prop_c0300_identity1 cube =
c t0 0 3 0 0 ~= (c t0 0 2 0 1 + c t3 0 2 1 0) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). See
+-- 'prop_c0120_identity1'.
prop_c1110_identity :: Cube -> Bool
prop_c1110_identity cube =
c t0 1 1 1 0 ~= (c t0 1 0 1 1 + c t3 1 0 1 1) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). See
+-- 'prop_c0120_identity1'.
prop_c1200_identity1 :: Cube -> Bool
prop_c1200_identity1 cube =
c t0 1 2 0 0 ~= (c t0 1 1 0 1 + c t3 1 1 1 0) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t3 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v2> and v3,v3-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.6). See
+-- 'prop_c0120_identity1'.
prop_c2100_identity1 :: Cube -> Bool
prop_c2100_identity1 cube =
c t0 2 1 0 0 ~= (c t0 2 0 0 1 + c t3 2 0 1 0) / 2
where
- t0 = tetrahedron0 cube
- t3 = tetrahedron3 cube
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). Note that the
+-- third and fourth indices of c-t3 have been switched. This is
+-- because we store the triangles oriented such that their volume is
+-- positive. If T and T-tilde share \<v0,v1,v2\> and v3,v3-tilde
+-- point in opposite directions, one of them has to have negative
+-- volume!
prop_c0102_identity1 :: Cube -> Bool
prop_c0102_identity1 cube =
c t0 0 1 0 2 ~= (c t0 0 0 1 2 + c t1 0 0 2 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). See
+-- 'prop_c0102_identity1'.
prop_c0201_identity1 :: Cube -> Bool
prop_c0201_identity1 cube =
c t0 0 2 0 1 ~= (c t0 0 1 1 1 + c t1 0 1 1 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). See
+-- 'prop_c0102_identity1'.
prop_c0300_identity2 :: Cube -> Bool
prop_c0300_identity2 cube =
c t0 0 3 0 0 ~= (c t0 0 2 1 0 + c t1 0 2 0 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). See
+-- 'prop_c0102_identity1'.
prop_c1101_identity :: Cube -> Bool
prop_c1101_identity cube =
c t0 1 1 0 1 ~= (c t0 1 0 1 1 + c t1 1 0 1 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). See
+-- 'prop_c0102_identity1'.
prop_c1200_identity2 :: Cube -> Bool
prop_c1200_identity2 cube =
c t0 1 2 0 0 ~= (c t0 1 1 1 0 + c t1 1 1 0 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
--- | Given in Sorokina and Zeilfelder, p. 79. Note that the third and
--- fourth indices of c-t1 have been switched. This is because we
--- store the triangles oriented such that their volume is
--- positive. If T and T-tilde share <v0,v1,v3> and v2,v2-tilde point
--- in opposite directions, one of them has to have negative volume!
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.7). See
+-- 'prop_c0102_identity1'.
prop_c2100_identity2 :: Cube -> Bool
prop_c2100_identity2 cube =
c t0 2 1 0 0 ~= (c t0 2 0 1 0 + c t1 2 0 0 1) / 2
where
- t0 = tetrahedron0 cube
- t1 = tetrahedron1 cube
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). The third and
+-- fourth indices of c-t6 have been switched. This is because we
+-- store the triangles oriented such that their volume is
+-- positive. If T and T-tilde share \<v0,v1,v2\> and v3,v3-tilde
+-- point in opposite directions, one of them has to have negative
+-- volume!
+prop_c3000_identity :: Cube -> Bool
+prop_c3000_identity cube =
+ c t0 3 0 0 0 ~= c t0 2 1 0 0 + c t6 2 1 0 0
+ - ((c t0 2 0 1 0 + c t0 2 0 0 1)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). See
+-- 'prop_c3000_identity'.
+prop_c2010_identity :: Cube -> Bool
+prop_c2010_identity cube =
+ c t0 2 0 1 0 ~= c t0 1 1 1 0 + c t6 1 1 0 1
+ - ((c t0 1 0 2 0 + c t0 1 0 1 1)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). See
+-- 'prop_c3000_identity'.
+prop_c2001_identity :: Cube -> Bool
+prop_c2001_identity cube =
+ c t0 2 0 0 1 ~= c t0 1 1 0 1 + c t6 1 1 1 0
+ - ((c t0 1 0 0 2 + c t0 1 0 1 1)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). See
+-- 'prop_c3000_identity'.
+prop_c1020_identity :: Cube -> Bool
+prop_c1020_identity cube =
+ c t0 1 0 2 0 ~= c t0 0 1 2 0 + c t6 0 1 0 2
+ - ((c t0 0 0 3 0 + c t0 0 0 2 1)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). See
+-- 'prop_c3000_identity'.
+prop_c1002_identity :: Cube -> Bool
+prop_c1002_identity cube =
+ c t0 1 0 0 2 ~= c t0 0 1 0 2 + c t6 0 1 2 0
+ - ((c t0 0 0 0 3 + c t0 0 0 1 2)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+
+-- | Given in Sorokina and Zeilfelder, p. 79, (2.8). See
+-- 'prop_c3000_identity'.
+prop_c1011_identity :: Cube -> Bool
+prop_c1011_identity cube =
+ c t0 1 0 1 1 ~= c t0 0 1 1 1 + c t6 0 1 1 1 -
+ ((c t0 0 0 1 2 + c t0 0 0 2 1)/ 2)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
-- | Given in Sorokina and Zeilfelder, p. 78.
--- prop_cijk1_identity :: Cube -> Bool
--- prop_cijk1_identity cube =
--- and [ c t0 i j k 1 ~=
--- (c t1 (i+1) j k 0) * ((b0 t0) (v3 t1)) +
--- (c t1 i (j+1) k 0) * ((b1 t0) (v3 t1)) +
--- (c t1 i j (k+1) 0) * ((b2 t0) (v3 t1)) +
--- (c t1 i j k 1) * ((b3 t0) (v3 t1)) | i <- [0..2],
--- j <- [0..2],
--- k <- [0..2],
--- i + j + k == 2]
--- where
--- t0 = tetrahedron0 cube
--- t1 = tetrahedron1 cube
+prop_cijk1_identity :: Cube -> Bool
+prop_cijk1_identity cube =
+ and [ c t0 i j k 1 ~=
+ (c t1 (i+1) j k 0) * ((b0 t0) (v3 t1)) +
+ (c t1 i (j+1) k 0) * ((b1 t0) (v3 t1)) +
+ (c t1 i j (k+1) 0) * ((b2 t0) (v3 t1)) +
+ (c t1 i j k 1) * ((b3 t0) (v3 t1)) | i <- [0..2],
+ j <- [0..2],
+ k <- [0..2],
+ i + j + k == 2]
+ where
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
+
+
+-- | The function values at the interior should be the same for all
+-- tetrahedra.
+prop_interior_values_all_identical :: Cube -> Bool
+prop_interior_values_all_identical cube =
+ all_equal [ eval (Tetrahedron.fv tet) I | tet <- tetrahedra cube ]
+
+
+-- | We know what (c t6 2 1 0 0) should be from Sorokina and Zeilfelder, p. 87.
+-- This test checks the rotation works as expected.
+prop_c_tilde_2100_rotation_correct :: Cube -> Bool
+prop_c_tilde_2100_rotation_correct cube =
+ expr1 == expr2
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+ -- What gets computed for c2100 of t6.
+ expr1 = eval (Tetrahedron.fv t6) $
+ (3/8)*I +
+ (1/12)*(T + R + L + D) +
+ (1/64)*(FT + FR + FL + FD) +
+ (7/48)*F +
+ (1/48)*B +
+ (1/96)*(RT + LD + LT + RD) +
+ (1/192)*(BT + BR + BL + BD)
+
+ -- What should be computed for c2100 of t6.
+ expr2 = eval (Tetrahedron.fv t0) $
+ (3/8)*I +
+ (1/12)*(F + R + L + B) +
+ (1/64)*(FT + RT + LT + BT) +
+ (7/48)*T +
+ (1/48)*D +
+ (1/96)*(FR + FL + BR + BL) +
+ (1/192)*(FD + RD + LD + BD)
+
+
+-- | We know what (c t6 2 1 0 0) should be from Sorokina and
+-- Zeilfelder, p. 87. This test checks the actual value based on
+-- the FunctionValues of the cube.
+--
+-- If 'prop_c_tilde_2100_rotation_correct' passes, then this test is
+-- even meaningful!
+prop_c_tilde_2100_correct :: Cube -> Bool
+prop_c_tilde_2100_correct cube =
+ c t6 2 1 0 0 == expected
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+ fvs = Tetrahedron.fv t0
+ expected = eval fvs $
+ (3/8)*I +
+ (1/12)*(F + R + L + B) +
+ (1/64)*(FT + RT + LT + BT) +
+ (7/48)*T +
+ (1/48)*D +
+ (1/96)*(FR + FL + BR + BL) +
+ (1/192)*(FD + RD + LD + BD)
+
+
+-- Tests to check that the correct edges are incidental.
+prop_t0_shares_edge_with_t1 :: Cube -> Bool
+prop_t0_shares_edge_with_t1 cube =
+ (v1 t0) == (v1 t1) && (v3 t0) == (v2 t1)
+ where
+ t0 = tetrahedron cube 0
+ t1 = tetrahedron cube 1
+
+prop_t0_shares_edge_with_t3 :: Cube -> Bool
+prop_t0_shares_edge_with_t3 cube =
+ (v1 t0) == (v1 t3) && (v2 t0) == (v3 t3)
+ where
+ t0 = tetrahedron cube 0
+ t3 = tetrahedron cube 3
+
+prop_t0_shares_edge_with_t6 :: Cube -> Bool
+prop_t0_shares_edge_with_t6 cube =
+ (v2 t0) == (v3 t6) && (v3 t0) == (v2 t6)
+ where
+ t0 = tetrahedron cube 0
+ t6 = tetrahedron cube 6
+
+prop_t1_shares_edge_with_t2 :: Cube -> Bool
+prop_t1_shares_edge_with_t2 cube =
+ (v1 t1) == (v1 t2) && (v3 t1) == (v2 t2)
+ where
+ t1 = tetrahedron cube 1
+ t2 = tetrahedron cube 2
+
+prop_t1_shares_edge_with_t19 :: Cube -> Bool
+prop_t1_shares_edge_with_t19 cube =
+ (v2 t1) == (v3 t19) && (v3 t1) == (v2 t19)
+ where
+ t1 = tetrahedron cube 1
+ t19 = tetrahedron cube 19
+
+prop_t2_shares_edge_with_t3 :: Cube -> Bool
+prop_t2_shares_edge_with_t3 cube =
+ (v1 t1) == (v1 t2) && (v3 t1) == (v2 t2)
+ where
+ t1 = tetrahedron cube 1
+ t2 = tetrahedron cube 2
+
+prop_t2_shares_edge_with_t12 :: Cube -> Bool
+prop_t2_shares_edge_with_t12 cube =
+ (v2 t2) == (v3 t12) && (v3 t2) == (v2 t12)
+ where
+ t2 = tetrahedron cube 2
+ t12 = tetrahedron cube 12
+
+prop_t3_shares_edge_with_t21 :: Cube -> Bool
+prop_t3_shares_edge_with_t21 cube =
+ (v2 t3) == (v3 t21) && (v3 t3) == (v2 t21)
+ where
+ t3 = tetrahedron cube 3
+ t21 = tetrahedron cube 21
+
+prop_t4_shares_edge_with_t5 :: Cube -> Bool
+prop_t4_shares_edge_with_t5 cube =
+ (v1 t4) == (v1 t5) && (v3 t4) == (v2 t5)
+ where
+ t4 = tetrahedron cube 4
+ t5 = tetrahedron cube 5
+
+prop_t4_shares_edge_with_t7 :: Cube -> Bool
+prop_t4_shares_edge_with_t7 cube =
+ (v1 t4) == (v1 t7) && (v2 t4) == (v3 t7)
+ where
+ t4 = tetrahedron cube 4
+ t7 = tetrahedron cube 7
+
+prop_t4_shares_edge_with_t10 :: Cube -> Bool
+prop_t4_shares_edge_with_t10 cube =
+ (v2 t4) == (v3 t10) && (v3 t4) == (v2 t10)
+ where
+ t4 = tetrahedron cube 4
+ t10 = tetrahedron cube 10
+
+prop_t5_shares_edge_with_t6 :: Cube -> Bool
+prop_t5_shares_edge_with_t6 cube =
+ (v1 t5) == (v1 t6) && (v3 t5) == (v2 t6)
+ where
+ t5 = tetrahedron cube 5
+ t6 = tetrahedron cube 6
+
+prop_t5_shares_edge_with_t16 :: Cube -> Bool
+prop_t5_shares_edge_with_t16 cube =
+ (v2 t5) == (v3 t16) && (v3 t5) == (v2 t16)
+ where
+ t5 = tetrahedron cube 5
+ t16 = tetrahedron cube 16
+
+prop_t6_shares_edge_with_t7 :: Cube -> Bool
+prop_t6_shares_edge_with_t7 cube =
+ (v1 t6) == (v1 t7) && (v3 t6) == (v2 t7)
+ where
+ t6 = tetrahedron cube 6
+ t7 = tetrahedron cube 7
+
+prop_t7_shares_edge_with_t20 :: Cube -> Bool
+prop_t7_shares_edge_with_t20 cube =
+ (v2 t7) == (v3 t20) && (v2 t7) == (v3 t20)
+ where
+ t7 = tetrahedron cube 7
+ t20 = tetrahedron cube 20
projects / spline3.git / blobdiff