2 ###########################################################################
3 # $Id: amavis.conf,v 1.10 2007/05/16 04:57:16 mrc Exp $
4 ###########################################################################
6 # You can put comments anywhere you want to. They are effective for the
9 # this is in the format of <name> = <value>. Whitespace at the beginning
10 # and end of the lines is removed. Whitespace before and after the = sign
11 # is removed. Everything is case *insensitive*.
14 # No = False = Off = 0
18 # Which logfile group...
21 # Specifies the global maximum detail level
25 # Only give lines pertaining to the amavis service...
27 # The variables OnlyService and amavis_Syslog_Name are regular
28 # expression patterns, and should both be set to match the
29 # amavis service name used in your syslog entries.
30 #*OnlyService = (usr/sbin/amavisd|dccproc)
31 *OnlyService = (amavis|dccproc)
34 # Set this to the service name used in amavis syslog entries
36 # Note: if you use parenthesis in your regular expression, be sure it
37 # is cloistering and not capturing: use (?:pattern) instead of (pattern).
38 # $amavis_Syslog_Name = "/usr/sbin/amavisd"
39 $amavis_Syslog_Name = "(?:amavis|dccproc)"
42 # Set the variable below to specify the maximum report width.
45 $amavis_Max_Report_Width = 100
47 # Specifies how to handle line lengths greater than Max_Report_Width.
48 # Options are Truncate (default), Wrap, or Full.
51 $amavis_Line_Style = Truncate
53 # Show names of detail section variables/command line options in
54 # detail report titles. For command line, use --[no]sect_vars,
55 # without an argument.
57 $amavis_Show_Sect_Vars = No
59 # In reports, for tallying purposes, use (and show) only the first
60 # recipient when a message contains multple recipients.
62 $amavis_Show_First_Recip_Only = No
64 # Include a by-contents category grouping in the summary report.
66 $amavis_Show_By_Ccat_Summary = Yes
68 # Amavis Timings Report
70 # Specifies the percentiles of collected data to show in the timing report.
71 # Valid values are from 0 to 100, inclusive.
73 $amavis_Timings_Percentiles = "0 5 25 50 75 95 100"
76 # Show top N percent of the amavis scan timings report
80 # Amavis SpamAssassin Timings Report
82 # Specifies the percentiles of collected data to show in the
83 # SpamAssassin timing report (requires amavis 2.6+, SA 3.3+).
84 # Valid values are from 0 to 100, inclusive.
86 $amavis_SA_Timings_Percentiles = "0 5 25 50 75 95 100"
89 # Show top N rows of the SpamAssassin timings report
90 # Requires: amavis 2.6+, SpamAssassin 3.3+
92 $amavis_SA_Timings = 100
94 # Spam Score Percentiles Report
96 # Specifies the percentiles shown in the spam scores frequency report.
97 # Valid values range from 0 to 100, inclusive. The keyword "default"
98 # can be used instead to reset the values to their built-in default.
100 $amavis_Score_Percentiles = "0 50 90 95 98 100"
102 # Spam Score Frequency Report
104 # Specifies the buckets shown in the spam scores frequency report.
105 # Valid values are real numbers. The keyword "default"
106 # can be used instead to reset the values to their built-in default.
108 $amavis_Score_Frequencies = "-10 -5 0 5 10 20 30"
110 # SpamAssassin Spam / Ham Rules Hit Report
112 # Specifies the number of top S spam and top H ham hits to show in the
113 # SpamAssassin Spam and Ham rules hit report. The value is a list
114 # separated by whitespace or a comma. The order is "spam,ham". The
115 # keyword "all" means unlimited limit, and 0 specifies none. For
116 # example, the value "all,10" would show all Spam rules hit, but only
117 # the top 10 ham rules, whereas "0,all" would prevent the Spam hit
118 # report, and show all the hit Ham rules.
120 $amavis_SARules = "20 20"
124 # Shows the autolearn report when autolearn entries are present in
125 # amavis log entries. To make these available, the default
126 # $log_templ variable needs to be modified. This can be done by
127 # uncommenting two lines in the amavis program itself (where the
128 # default log templates reside), by correctly adding the $log_templ
129 # variable to the amavisd.conf file. See amavis' README.customize
130 # and the end of the amavisd program, searching for "autolearn".
131 $amavis_Show_Autolearn = Yes
133 # If available, show most recent amavis startup details
135 $amavis_Show_StartInfo = Yes
137 # Show the summary section. For command line, use --[no]summary,
138 # without an argument.
139 $amavis_Show_Summary = Yes
143 # The variables below control the maximum output level for a given
144 # category. A level of 1 indicates only one level of detailed output
145 # in the Detailed report section. The Summary section is only avail-
146 # able at logwatch --Detail level >= 5. Increasing the Detail level
147 # by one adds one level of additional detail in the Summary section.
149 # For example, Detail 5 would output one additional level of detail,
150 # Detail 6 two levels, etc. all the way up to 10. Finally, Detail
151 # 11 yields uncropped lines of output.
153 # You can control the maximum number of level 1 lines by appending
154 # a period and a number. The value 2.10 would indicate 2 levels
155 # of detail, but only 10 level 1 lines. For example, setting
156 # $amavis_SpamBlocked = 1.20 yields a top 20 list of blocked spam.
158 # A more useful form of limiting uses triplets in the form l:n:t.
159 # This triplet specifies level l, top n, and minimum threshold t.
160 # Each of the values are integers, with l being the level limiter
161 # as described above, n being a top n limiter for the level l, and
162 # t being the threshold limiter for level l. When both n and t
163 # are specified, n has priority, allowing top n lists (regardless
164 # of threshold value). If the value of l is omitted, the speci-
165 # fied values for n and/or t are used for all levels available in
166 # the sub-section. This permits a simple form of wildcarding (eg.
167 # place minimum threshold limits on all levels). However, spe-
168 # cific limiters always override wildcard limiters. The first
169 # form of level limiter may be included in levelspec to restrict
170 # output, regardless of how many triplets are present.
172 $amavis_CleanPassed = 0
173 $amavis_CleanBlocked = 10
174 $amavis_SpamPassed = 10
175 $amavis_SpamBlocked = 10
176 $amavis_SpammyPassed = 10
177 $amavis_SpammyBlocked = 10
178 $amavis_MalwarePassed = 10
179 $amavis_MalwareBlocked = 10
180 $amavis_BannedNamePassed = 10
181 $amavis_BannedNameBlocked = 10
182 $amavis_BadHeaderPassed = 10
183 $amavis_BadHeaderBlocked = 10
184 $amavis_MTABlocked = 10
185 $amavis_OversizedBlocked = 10
186 $amavis_OtherBlocked = 10
188 $amavis_AVConnectFailure = 10
189 $amavis_AVTimeout = 10
190 $amavis_ArchiveExtract = 10
191 $amavis_BadHeaderSupp = 10
193 $amavis_Blacklisted = 10
194 $amavis_BounceKilled = 10
195 $amavis_BounceRescued = 10
196 $amavis_BounceUnverifiable = 10
197 $amavis_ContentType = 10
198 $amavis_DccError = 10
199 $amavis_DefangError = 10
200 $amavis_Defanged = 10
201 $amavis_DsnNotification = 10
202 $amavis_DsnSuppressed = 10
203 $amavis_ExtraModules = 10
204 $amavis_FakeSender = 10
205 $amavis_LocalDeliverySkipped = 10
206 $amavis_MalwareByScanner = 10
207 $amavis_MalwareToSpam = 10
208 $amavis_MimeError = 10
210 $amavis_Released = 10
212 $amavis_SmtpResponse = 10
213 $amavis_TmpPreserved = 10
214 $amavis_VirusScanSkipped = 1
216 $amavis_WarningAddressModified = 2
217 $amavis_WarningNoQuarantineID = 1
218 $amavis_WarningSecurity = 10
219 $amavis_WarningSmtpShutdown = 10
220 $amavis_WarningSQL = 10
221 $amavis_Whitelisted = 10
224 # vi: shiftwidth=3 tabstop=3 et