From: Michael Orlitzky Date: Thu, 5 Aug 2021 21:53:24 +0000 (-0400) Subject: amavis-logwatch.1.html: delete auto-generated file. X-Git-Tag: 1.51.04~9 X-Git-Url: https://gitweb.michael.orlitzky.com/?a=commitdiff_plain;h=0dbe302189e86403ae728b463c055bf7973c4eec;p=amavis-logwatch.git amavis-logwatch.1.html: delete auto-generated file. The HTML docs are built from the man page, if you want them. --- diff --git a/amavis-logwatch.1.html b/amavis-logwatch.1.html deleted file mode 100644 index 24a0af2..0000000 --- a/amavis-logwatch.1.html +++ /dev/null @@ -1,888 +0,0 @@ - - - - Man page: amavis-logwatch(1) - 
-AMAVIS-LOGWATCH(1)          General Commands Manual         AMAVIS-LOGWATCH(1)
-
-
-
-NAME
-       amavis-logwatch - An Amavisd-new log parser and analysis utility
-
-SYNOPSIS
-       amavis-logwatch [options] [logfile ...]
-
-DESCRIPTION
-       The  amavis-logwatch(1)  utility is an Amavisd-new log parser that pro-
-       duces summaries, details, and statistics  regarding  the  operation  of
-       Amavisd-new (henceforth, simply called Amavis).
-
-       This utility can be used as a standalone program, or as a Logwatch fil-
-       ter module to produce Amavisd-new summary  and  detailed  reports  from
-       within Logwatch.
-
-       Amavis-logwatch  is  able  to produce a wide range of reports with data
-       grouped and sorted as much as possible to reduce  noise  and  highlight
-       patterns.   Brief  summary  reports provide a quick overview of general
-       Amavis operations and message delivery, calling out warnings  that  may
-       require  attention.   Detailed reports provide easy to scan, hierarchi-
-       cally-arranged and organized information, with as much or little detail
-       as desired.
-
-       Much  of  the  interesting data is available when Amavis' $log_level is
-       set to at least 2.  See Amavis Log Level below.
-
-       Amavis-logwatch outputs two principal sections: a Summary section and a
-       Detailed section.  For readability and quick scanning, all event or hit
-       counts appear in the left column, followed by brief description of  the
-       event  type, and finally additional statistics or count representations
-       may appear in the rightmost column.
-
-       The following segment from a sample Summary report illustrates:
-
-           ****** Summary ********************************************
-
-                  9   Miscellaneous warnings
-
-              20313   Total messages scanned ----------------  100.00%
-           1008.534M  Total bytes scanned                1,057,524,252
-           ========   ================================================
-
-               1190   Blocked -------------------------------    5.86%
-                 18     Malware blocked                          0.09%
-                  4     Banned name blocked                      0.02%
-                416     Spam blocked                             2.05%
-                752     Spam discarded (no quarantine)           3.70%
-
-              19123   Passed --------------------------------   94.14%
-                 47     Bad header passed                        0.23%
-              19076     Clean passed                            93.91%
-           ========   ================================================
-
-                 18   Malware -------------------------------    0.09%
-                 18     Malware blocked                          0.09%
-
-                  4   Banned --------------------------------    0.02%
-                  4     Banned file blocked                      0.02%
-
-               1168   Spam ----------------------------------    5.75%
-                416     Spam blocked                             2.05%
-                752     Spam discarded (no quarantine)           3.70%
-
-              19123   Ham -----------------------------------   94.14%
-                 47     Bad header passed                        0.23%
-              19076     Clean passed                            93.91%
-           ========   ================================================
-
-               1982   SpamAssassin bypassed
-                 32   Released from quarantine
-                  2   DSN notification (debug supplemental)
-                  2   Bounce unverifiable
-               2369   Whitelisted
-                  2   Blacklisted
-                 12   MIME error
-                 58   Bad header (debug supplemental)
-                 40   Extra code modules loaded at runtime
-
-       The report indicates there were 9 general warnings, and Amavis  scanned
-       a  total  of  20313  messages  for  a  total  of  1008.53  megabytes or
-       1,057,524,252 bytes.  The next  summary  groups  shows  the  Blocked  /
-       Passed overview, with 1190 Blocked messages (broken down as 18 messages
-       blocked as malware, 4 messages with banned names,  416  spam  messages,
-       and  752  discarded  messages),  and 19123 Passed messages (47 messages
-       with bad headers and 19076 clean messages).
-
-       The next (optional) summary grouping shows message disposition by  con-
-       tents  category.  There were 18 malware messages and 4 banned file mes-
-       sages (all blocked), 1168 Spam messages,  of  which  416  were  blocked
-       (quarantined)  and  752  discarded.  Finally, there were 19123 messages
-       consdidered to be Ham (i.e. not spam), 47 of which contained bad  head-
-       ers.
-
-       Additional count summaries for a variety of events are also listed.
-
-       There are dozens of sub-sections available in the Detailed report, each
-       of whose output can be controlled in various  ways.   Each  sub-section
-       attempts to group and present the most meaningful data at superior lev-
-       els, while pushing less useful or noisy data towards  inferior  levels.
-       The  goal is to provide as much benefit as possible from smart grouping
-       of data, to allow faster report scanning, pattern  identification,  and
-       problem  solving.   Data is always sorted in descending order by count,
-       and then numerically by IP address or alphabetically as appropriate.
-
-       The following Spam blocked segment from a sample Detailed report illus-
-       trates the basic hierarchical level structure of amavis-logwatch:
-
-           ****** Detailed *******************************************
-
-              19346   Spam blocked -----------------------------------
-                756      from@example.com
-                 12         10.0.0.2
-                 12            <>
-                 12         192.168.2.2
-                 12            <>
-                  5         192.168.2.1
-                ...
-
-
-       The  amavis-logwatch  utility reads from STDIN or from the named Amavis
-       logfile.  Multiple logfile arguments may be specified,  each  processed
-       in  order.   The user running amavis-logwatch must have read permission
-       on each named log file.
-
-   Options
-       The options listed  below  affect  the  operation  of  amavis-logwatch.
-       Options specified later on the command line override earlier ones.  Any
-       option may be abbreviated to an unambiguous length.
-
-
-       --[no]autolearn
-       --show_autolearn boolean
-              Enables (disables) output of the autolearn report.  This  report
-              is only available if the default Amavis $log_templ has been mod-
-              ified to provide autolearn results in log entries.  This can  be
-              done  by  uncommenting  two  lines  in the Amavis program itself
-              (where the default log templates reside), or by correctly adding
-              the  $log_templ  variable to the amavisd.conf file.  See Amavis'
-              README.customize and search near the end of the Amavisd  program
-              for "autolearn".
-
-       --[no]by_ccat_summary
-       --show_by_ccat_summary boolean
-              Enables  (disables) the by contents category summary in the Sum-
-              mary section.  Default: enabled.
-
-       -f config_file
-       --config_file config_file
-              Use an alternate configuration file config_file instead  of  the
-              default.  This option may be used more than once.  Multiple con-
-              figuration files will be processed in the order presented on the
-              command line.  See CONFIGURATION FILE below.
-
-       --debug keywords
-              Output  debug  information  during  the operation of amavis-log-
-              watch.  The parameter keywords is one or  more  comma  or  space
-              separated  keywords.   To obtain the list of valid keywords, use
-              --debug xxx where xxx is any invalid keyword.
-
-       --detail level
-              Sets the maximum detail  level  for  amavis-logwatch  to  level.
-              This  option  is  global,  overriding  any other output limiters
-              described below.
-
-              The  amavis-logwatch  utility  produces  a  Summary  section,  a
-              Detailed  section,  and  additional report sections.  With level
-              less than 5, amavis-logwatch will produce only the Summary  sec-
-              tion.  At level 5 and above, the Detailed section, and any addi-
-              tional report sections are candidates for output.   Each  incre-
-              mental  increase  in level generates one additional hierarchical
-              sub-level of output in the Detailed section of the  report.   At
-              level  10, all levels are output.  Lines that exceed the maximum
-              report width (specified  with  max_report_width)  will  be  cut.
-              Setting  level to 11 will prevent lines in the report from being
-              cut (see also --line_style).
-
-       --[no]first_recip_only
-       --show_first_recip_only boolean
-              Specifies whether or not to sort by, and show,  only  the  first
-              recipient when a scanned messages contains multiple recipients.
-
-       --help Print  usage  information  and a brief description about command
-              line options.
-
-       --ipaddr_width width
-              Specifies that IP addresses in address/hostname pairs should  be
-              printed  with a field width of width characters.  Increasing the
-              default may be useful for systems using long IPv6 addresses.
-
-       -l limiter=levelspec
-       --limit limiter=levelspec
-              Sets the level limiter limiter with the specification levelspec.
-
-       --line_style style
-              Specifies how to handle long report  lines.   Three  styles  are
-              available: full, truncate, and wrap.  Setting style to full will
-              prevent cutting lines to max_report_width; this is  what  occurs
-              when  detail  is  11  or  higher.   When  style is truncate (the
-              default),  long   lines   will   be   truncated   according   to
-              max_report_width.   Setting style to wrap will wrap lines longer
-              than max_report_width such that left column hit counts  are  not
-              obscured.   This  option  takes  precedence  over the line style
-              implied by the detail level.  The  options  --full,  --truncate,
-              and --wrap are synonyms.
-
-
-       --nodetail
-              Disables  the Detailed section of the report, and all supplemen-
-              tal reports.  This option provides  a  convenient  mechanism  to
-              quickly  disable  all  sections under the Detailed report, where
-              subsequent command line options may re-enable one or  more  sec-
-              tions to create specific reports.
-
-       --sarules `S,H'
-       --sarules default
-              Enables  the SpamAssassin Rules Hit report.  The comma-separated
-              S and H arguments are top N values for the Spam and Ham reports,
-              respectively, and can be any integer greater than or equal to 0,
-              or the keyword all.   The  keyword  default  uses  the  built-in
-              default values.
-
-       --nosarules
-              Disables the SpamAssassin Rules Hit report.
-
-       --sa_timings nrows
-              Enables the SpamAssassin Timings percentiles report.  The report
-              can be limited to the top N rows with the nrows argument.   This
-              report requires Amavis 2.6+ and SpamAssassin 3.3+.
-
-       --sa_timings_percentiles `P1 [P2 ...]'
-              Specifies  the  percentiles  shown  in  the SpamAssassin Timings
-              report.  The arguments P1 ... are integers from 0 to 100  inclu-
-              sive.  Their order will be preserved in the report.
-
-       --nosa_timings
-              Disables the SpamAssassin Timings report.
-
-       --version
-              Print amavis-logwatch version information.
-
-       --score_frequencies `B1 [B2 ...]'
-       --score_frequencies default
-              Enables  the  Spam Score Frequency report.  The arguments B1 ...
-              are frequency distribution buckets, and can be any real numbers.
-              Their  order  will  be  preserved  in  the  report.  The keyword
-              default uses the built-in default values.
-
-       --noscore_frequencies
-              Disables the Spam Score Frequency report.
-
-       --score_percentiles `P1 [P2 ...]'
-       --score_percentiles default
-              Enables the Spam Score Percentiles report.  The arguments P1 ...
-              specify  the  percentiles  shown in the report, and are integers
-              from 0 to 100 inclusive.  The keyword default uses the  built-in
-              default values.
-
-       --noscore_percentiles
-              Disables the Spam Score Percentiles report.
-
-
-       --[no]sect_vars
-       --show_sect_vars boolean
-              Enables  (disables)  supplementing  each  Detailed section title
-              with the name of that section's level limiter.   The  name  dis-
-              played  is  the command line option (or configuration file vari-
-              able) used to limit that section's output.  With the large  num-
-              ber  of level limiters available in amavis-logwatch, this a con-
-              venient mechanism for determining exactly  which  level  limiter
-              affects a section.
-
-       --[no]startinfo
-       --show_startinfo boolean
-              Enables (disables) the Amavis startup report showing most recent
-              Amavis startup details.
-
-       --[no]summary
-
-       --show_summary
-              Enables (disables) displaying of the the Summary section of  the
-              report.   The variable Amavis_Show_Summary in used in a configu-
-              ration file.
-
-       --syslog_name namepat
-              Specifies the syslog service name that amavis-logwatch  uses  to
-              match  syslog  lines.  Only log lines whose service name matches
-              the perl regular expression namepat will be used by  amavis-log-
-              watch;  all  non-matching  lines  are silently ignored.  This is
-              useful when a pre-installed Amavis package  uses  a  name  other
-              than the default (amavis).
-
-              Note: if you use parenthesis in your regular expression, be sure
-              they are cloistering and not capturing: use  (?:pattern) instead
-              of (pattern).
-
-       --timings percent
-              Enables  the Amavis Scan Timings percentiles report.  The report
-              can be top N-percent limited with the percent argument.
-
-       --timings_percentiles `P1 [P2 ...]'
-              Specifies the percentiles shown in the Scan Timings report.  The
-              arguments  P1  ...  are integers from 0 to 100 inclusive.  Their
-              order will be preserved in the report.
-
-       --notimings
-              Disables the Amavis Scan Timings report.
-
-       --version
-              Print amavis-logwatch version information.
-
-
-   Level Limiters
-       The output of every section in the Detailed report is controlled  by  a
-       level  limiter.   The name of the level limiter variable will be output
-       when the sect_vars option is set.  Level limiters are  set  either  via
-       command  line in standalone mode with --limit limiter=levelspec option,
-       or via configuration  file  variable  $amavis_limiter=levelspec.   Each
-       limiter  requires  a  levelspec  argument,  which is described below in
-       LEVEL CONTROL.
-
-       The list of level limiters is shown below.
-
-
-       Amavis major contents category (ccatmajor) sections, listed in order of
-       priority: VIRUS, BANNED, UNCHECKED, SPAM, SPAMMY, BADH, OVERSIZED, MTA,
-       CLEAN.
-
-       MalwareBlocked
-       MalwarePassed
-              Blocked or passed  messages  that  contain  malware  (ccatmajor:
-              VIRUS).
-
-       BannedNameBlocked
-       BannedNamePassed
-              Blocked  or  passed  messages  that contain banned names in MIME
-              parts (ccatmajor: BANNED).
-
-       UncheckedBlocked
-       UncheckedPassed
-              Blocked or passed messages that were  not  checked  by  a  virus
-              scanner or SpamAssassin (Amavis ccatmajor: UNCHECKED).
-
-       SpamBlocked
-       SpamPassed
-              Blocked  or  passed  messages  that  were  considered  spam that
-              reached kill level (Amavis ccatmajor: SPAM)
-
-       SpammyBlocked
-       SpammyPassed
-              Blocked or passed messages that were considered  spam,  but  did
-              not reach kill level (Amavis ccatmajor: SPAMMY)
-
-       BadHeaderBlocked
-       BadHeaderPassed
-              Blocked  or passed messages that contain bad mail headers (ccat-
-              major: BAD-HEADER).
-
-       OversizedBlocked
-       OversizedPassed
-              Blocked  or  passed  messages  that  were  considered  oversized
-              (Amavis ccatmajor: OVERSIZED).
-
-       MtaBlocked
-       MtaPassed
-              Blocked  or  passed  messages due to failure to re-inject to MTA
-              (Amavis ccatmajor:  MTA-BLOCKED).   Occurrences  of  this  event
-              indicates a configuration problem.  [ note: I don't believe mta-
-              passed occurs, but exists for completeness.]
-
-       OtherBlocked
-       OtherPassed
-              Blocked or passed messages that are not any of other major  con-
-              tents categories (Amavis ccatmajor: OTHER).
-
-
-       TempFailBlocked
-       TempfailPassed
-              Blocked  or passed messages that had a temporary failure (Amavis
-              ccatmajor: TEMPFAIL)
-
-       CleanBlocked
-       CleanPassed
-              Messages blocked or passed which were considered  clean  (Amavis
-              ccatmajor: CLEAN; i.e. non-spam, non-viral).
-
-       Other sections, arranged alphabetically:
-
-       AvConnectFailure
-              Problems connecting to Anti-Virus scanner(s).
-
-       AvTimeout
-              Timeouts awaiting responses from Anti-Virus scanner(s).
-
-       ArchiveExtract
-              Archive extraction problems.
-
-       BadHeaderSupp
-              Supplemental debug information regarding messages containing bad
-              mail headers.
-
-       Bayes  Messages frequencies by Bayesian probability buckets.
-
-       BadAddress
-              Invalid mail address syntax.
-
-       Blacklisted
-              Messages that were  (soft-)blacklisted.   See  also  Whitelisted
-              below.
-
-       BounceKilled
-       BounceRescued
-       BounceUnverifiable
-              Disposition of incoming bounce messages (DSNs).
-
-       ContentType
-              MIME attachment breakdown by type/subtype.
-
-       DccError
-              Errors encountered with or returned by DCC.
-
-       DefangError
-              Errors encountered during defang process.
-
-       Defanged
-              Messages defanged (rendered harmless).
-
-       DsnNotification
-              Errors  encountered during attempt to send delivery status noti-
-              fication.
-
-       DsnSuppressed
-              Delivery status notification (DSN) intentionally suppressed.
-
-       ExtraModules
-              Additional code modules Amavis loaded during runtime.
-
-       FakeSender
-              Forged sender addresses, as determimed by Amavis.
-
-       Fatal  Fatal events.  These are presented at the top of the report,  as
-              they may require attention.
-
-       LocalDeliverySkipped
-              Failures delivering to a local address.
-
-       MalwareByScanner
-              Breakdown of malware by scanner(s) that detected the malware.
-
-       MimeError
-              Errors encountered during MIME extraction.
-
-       Panic  Panic  events.  These are presented at the top of the report, as
-              they may require attention.
-
-       p0f    Passive fingerprint (p0f) hits, grouped by  mail  contents  type
-              (virus,  unchecked, banned, spam, ham), next by operating system
-              genre, and finally by IP address.   Note:  Windows  systems  are
-              refined by Windows OS version, whereas versions of other operat-
-              ing systems are grouped generically.
-
-       Released
-              Messages that were released from Amavis quarantine.
-
-       SADiags
-              Diagnostics as reported from SpamAssassin.
-
-       SmtpResponse
-              SMTP responses received  during  dialog  with  MTA.   These  log
-              entries are primarly debug.
-
-       TmpPreserved
-              Temporary  directories  preserved  by Amavis when some component
-              encounters a problem or failure.  Directories listed  and  their
-              corresponding log entries should be evaluated for problems.
-
-       VirusScanSkipped
-              Messages that could not be scanned by a virus scanner.
-
-       Warning
-              Warning  events  not  categorized  in  specific  warnings below.
-              These are presented at the  top  of  the  report,  as  they  may
-              require attention.
-
-       WarningAddressModified
-              Incomplete email addresses modified by Amavis for safety.
-
-       WarningNoQuarantineId
-              Attempts  to  release a quarantined message that did not contain
-              an X-Quarantine-ID header.
-
-       WarningSecurity levelspec
-              Insecure configuration or utility used by Amavis.
-
-       WarningSmtpShutdown
-              Failures during SMTP conversation with MTA.
-
-       WarningSql
-              Failures to communicate with, or error replies  from,  SQL  ser-
-              vice.
-
-       Whitelisted
-              Messages  that  were  (soft-)whitelisted.   See also Blacklisted
-              above.
-
-
-LEVEL CONTROL
-       The Detailed section of the report consists of  a  number  of  sub-sec-
-       tions,  each  of  which  is controlled both globally and independently.
-       Two settings influence the output provided in the  Detailed  report:  a
-       global detail level (specified with --detail) which has final (big ham-
-       mer) output-limiting control over the Detailed section, and sub-section
-       specific  detail  settings (small hammer), which allow further limiting
-       of the output for a sub-section.  Each sub-section may be limited to  a
-       specific  depth  level, and each sub-level may be limited with top N or
-       threshold limits.  The levelspec argument to each of the level limiters
-       listed above is used to accomplish this.
-
-       It  is probably best to continue explanation of sub-level limiting with
-       the following well-known outline-style hierarchy, and some basic  exam-
-       ples:
-
-           level 0
-              level 1
-                 level 2
-                    level 3
-                       level 4
-                       level 4
-                 level 2
-                    level 3
-                       level 4
-                       level 4
-                       level 4
-                    level 3
-                       level 4
-                    level 3
-              level 1
-                 level 2
-                    level 3
-                       level 4
-
-       The  simplest  form  of  output  limiting suppresses all output below a
-       specified level.  For example, a levelspec set to "2" shows  only  data
-       in  levels  0  through 2.  Think of this as collapsing each sub-level 2
-       item, thus hiding all inferior levels (3, 4, ...), to yield:
-
-           level 0
-              level 1
-                 level 2
-                 level 2
-              level 1
-                 level 2
-
-       Sometimes the volume of output in a section is too  great,  and  it  is
-       useful  to  suppress  any data that does not exceed a certain threshold
-       value.  Consider a dictionary spam attack, which produces very  lengthy
-       lists  of  hit-once recipient email or IP addresses.  Each sub-level in
-       the hierarchy can be threshold-limited by setting the levelspec  appro-
-       priately.  Setting levelspec to the value "2::5" will suppress any data
-       at level 2 that does not exceed a hit count of 5.
-
-       Perhaps producing a top N list, such as top 10 senders, is desired.   A
-       levelspec of "3:10:" limits level 3 data to only the top 10 hits.
-
-       With  those simple examples out of the way, a levelspec is defined as a
-       whitespace- or comma-separated list of one or more of the following:
-
-       l      Specifies the maximum level to be output for  this  sub-section,
-              with a range from 0 to 10.  if l is 0, no levels will be output,
-              effectively disabling the sub-section (level 0 data  is  already
-              provided  in  the  Summary  report, so level 1 is considered the
-              first useful level in the Detailed report).  Higher values  will
-              produce output up to and including the specified level.
-
-       l.n    Same  as  above,  with the addition that n limits this section's
-              level 1 output to the top n items.  The value for n can  be  any
-              integer greater than 1.  (This form of limiting has less utility
-              than the syntax shown below. It is provided for  backwards  com-
-              patibility; users are encouraged to use the syntax below).
-
-       l:n:t  This  triplet specifies level l, top n, and minimum threshold t.
-              Each of the values are integers, with l being the level  limiter
-              as described above, n being a top n limiter for the level l, and
-              t being the threshold limiter for level l.  When both  n  and  t
-              are  specified, n has priority, allowing top n lists (regardless
-              of threshold value).  If the value of l is omitted,  the  speci-
-              fied  values for n and/or t are used for all levels available in
-              the sub-section.  This permits a simple form of wildcarding (eg.
-              place  minimum  threshold  limits on all levels).  However, spe-
-              cific limiters always override  wildcard  limiters.   The  first
-              form  of  level limiter may be included in levelspec to restrict
-              output, regardless of how many triplets are present.
-
-       All three forms of limiters are effective only  when  amavis-logwatch's
-       detail  level  is  5  or greater (the Detailed section is not activated
-       until detail is at least 5).
-
-       See the EXAMPLES section for usage scenarios.
-
-CONFIGURATION FILE
-       Amavis-logwatch can read configuration settings  from  a  configuration
-       file.   Essentially,  any command line option can be placed into a con-
-       figuration file, and these settings are read upon startup.
-
-       Because amavis-logwatch can run either standalone or  within  Logwatch,
-       to  minimize  confusion, amavis-logwatch inherits Logwatch's configura-
-       tion file syntax requirements and conventions.  These are:
-
-       o   White space lines are ignored.
-
-       o   Lines beginning with # are ignored
-
-       o   Settings are of the form:
-
-                   option = value
-
-
-       o   Spaces or tabs on either side of the = character are ignored.
-
-       o   Any value protected in double quotes will be case-preserved.
-
-       o   All other content is reduced  to  lowercase  (non-preserving,  case
-           insensitive).
-
-       o   All  amavis-logwatch  configuration  settings must be prefixed with
-           "$amavis_" or amavis-logwatch will ignore them.
-
-       o   When  running  under  Logwatch,  any  values  not   prefixed   with
-           "$amavis_"  are consumed by Logwatch; it only passes to amavis-log-
-           watch (via environment variable) settings it considers valid.
-
-       o   The values True and Yes are converted to 1, and False  and  No  are
-           converted to 0.
-
-       o   Order  of  settings  is  not  preserved within a configuration file
-           (since settings are passed by Logwatch via  environment  variables,
-           which have no defined order).
-
-       To  include  a  command line option in a configuration file, prefix the
-       command line option name with the word "$amavis_".  The following  con-
-       figuration file setting and command line option are equivalent:
-
-               $amavis_Line_Style = Truncate
-
-               --line_style Truncate
-
-       Level limiters are also prefixed with $amavis_, but on the command line
-       are specified with the --limit option:
-
-               $amavis_SpamBlocked = 2
-
-               --limit SpamBlocked=2
-
-
-
-       The order of command line options  and  configuration  file  processing
-       occurs  as  follows:  1)  The  default configuration file is read if it
-       exists and no --config_file was specified on a command line.   2)  Con-
-       figuration  files are read and processed in the order found on the com-
-       mand line.  3) Command line options override any  options  already  set
-       either via command line or from any configuration file.
-
-       Command  line options are interpreted when they are seen on the command
-       line, and later options will override previously set options.
-
-
-
-EXIT STATUS
-       The amavis-logwatch utility exits with a status code of  0,  unless  an
-       error occurred, in which case a non-zero exit status is returned.
-
-EXAMPLES
-   Running Standalone
-       Note:  amavis-logwatch reads its log data from one or more named Amavis
-       log files, or from STDIN.  For brevity, where  required,  the  examples
-       below   use  the  word  file  as  the  command  line  argument  meaning
-       /path/to/amavis.log.  Obviously you will need to substitute  file  with
-       the appropriate path.
-
-       To run amavis-logwatch in standalone mode, simply run:
-
-           amavis-logwatch file
-
-       A complete list of options and basic usage is available via:
-
-           amavis-logwatch --help
-
-       To print a summary only report of Amavis log data:
-
-           amavis-logwatch --detail 1 file
-
-       To produce a summary report and a one-level detail report for May 25th:
-
-           grep 'May 25' file | amavis-logwatch --detail 5
-
-       To produce only a top 10 list of Sent email domains, the summary report
-       and detailed reports are first disabled. Since  commands  line  options
-       are  read  and enabled left-to-right, the Sent section is re-enabled to
-       level 1 with a level 1 top 10 limiter:
-
-           amavis-logwatch --nosummary --nodetail \
-              --limit spamblocked '1 1:10:' file
-
-       The following command and its sample output shows a more complex  level
-       limiter  example.   The command gives the top 4 spam blocked recipients
-       (level 1), and under with each recipient the top 2 sending  IPs  (level
-       2)  and finally below that, only envelope from addresses (level 3) with
-       hit counts greater than 6.  Ellipses indicate top N  or  threshold-lim-
-       ited data:
-
-           amavis-logwatch --nosummary --nodetail \
-                   --limit spamblocked '1:4: 2:2: 3::6' file
-
-           19346   Spam blocked -----------------------------------
-             756      joe@example.com
-              12         10.0.0.1
-              12            <>
-              12         10.99.99.99
-              12            <>
-                     ...
-             640      fred@example.com
-               8         10.0.0.1
-               8            <>
-               8         192.168.3.19
-               8            <>
-                     ...
-             595      peter@sample.net
-               8         10.0.0.1
-               8            <>
-               7         192.168.3.3
-               7            <>
-                     ...
-             547      paul@example.us
-               8         192.168.3.19
-               8            <>
-               7         10.0.0.1
-               7            <>
-                      ...
-                   ...
-
-   Running within Logwatch
-       Note:  Logwatch  versions  prior to 7.3.6, unless configured otherwise,
-       required the --print option to  print  to  STDOUT  instead  of  sending
-       reports  via  email.  Since version 7.3.6, STDOUT is the default output
-       destination, and the --print option has been replaced by --output  std-
-       out.  Check your configuration to determine where report output will be
-       directed, and add the appropriate option to the commands below.
-
-       To print a summary report for today's Amavis log data:
-
-           logwatch --service amavis --range today --detail 1
-
-       To print a report for today's Amavis log data, with one level
-       of detail in the Detailed section:
-
-           logwatch --service amavis --range today --detail 5
-
-       To print a report for yesterday, with  two  levels  of  detail  in  the
-       Detailed section:
-
-           logwatch --service amavis --range yesterday --detail 6
-
-       To  print  a report from Dec 12th through Dec 14th, with four levels of
-       detail in the Detailed section:
-
-           logwatch --service amavis --range \
-                   'between 12/12 and 12/14' --detail 8
-
-       To print a report for today, with all levels of detail:
-
-           logwatch --service amavis --range today --detail 10
-
-       Same as above, but leaves long lines uncropped:
-
-           logwatch --service amavis --range today --detail 11
-
-   Amavis Log Level
-       Amavis provides additional log information when the variable $log_level
-       is  increased  above  the default 0 value.  This information is used by
-       the amavis-logwatch utility to provide additional reports,  not  avail-
-       able  with  the  default $log_level=0 value.  A $log_level of 2 is sug-
-       gested.
-
-       If you prefer not to increase the noise level  in  your  main  mail  or
-       Amavis logs, you can configure syslog to log Amavis' output to multiple
-       log files, where basic log entries are routed to your main mail  log(s)
-       and more detailed entries routed to an Amavis-specific log file used to
-       feed the amavis-logwatch utility.
-
-       A convenient way to accomplish this is to change the Amavis  configura-
-       tion variables in amavisd.conf as shown below:
-
-           amavisd.conf:
-               $log_level = 2;
-               $syslog_facility = 'local5';
-               $syslog_priority = 'debug';
-
-
-       This  increases  $log_level  to  2, and sends Amavis' log entries to an
-       alternate syslog facility (eg. local5, user), which can then be  routed
-       to one or more log files, including your main mail log file:
-
-           syslog.conf:
-               #mail.info                         -/var/log/maillog
-               mail.info;local5.notice            -/var/log/maillog
-
-               local5.info                        -/var/log/amavisd-info.log
-
-
-       Amavis'  typical  $log_level  0  messages will be directed to both your
-       maillog and to the amavisd-info.log file, but  higher  $log_level  mes-
-       sages will only be routed to the amavisd-info.log file.  For additional
-       information on Amavis' logging, search the file  RELEASE_NOTES  in  the
-       Amavis distribution for:
-
-           "syslog priorities are now dynamically derived"
-
-
-ENVIRONMENT
-       The  amavis-logwatch  program  uses  the  following (automatically set)
-       environment variables when running under Logwatch:
-
-       LOGWATCH_DETAIL_LEVEL
-              This is the detail level specified  with  the  Logwatch  command
-              line argument --detail or the Detail setting in the ...conf/ser-
-              vices/amavis.conf configuration file.
-
-       LOGWATCH_DEBUG
-              This is the debug level specified with the Logwatch command line
-              argument --debug.
-
-       amavis_xxx
-              The  Logwatch program passes all settings amavis_xxx in the con-
-              figuration file ...conf/services/amavis.conf to the amavis  fil-
-              ter  (which  is  actually named .../scripts/services/amavis) via
-              environment variable.
-
-FILES
-   Standalone mode
-       /usr/local/bin/amavis-logwatch
-              The amavis-logwatch program
-
-       /usr/local/etc/amavis-logwatch.conf
-              The amavis-logwatch configuration file in standalone mode
-
-   Logwatch mode
-       /etc/logwatch/scripts/services/amavis
-              The Logwatch amavis filter
-
-       /etc/logwatch/conf/services/amavis.conf
-              The Logwatch amavis filter configuration file
-
-SEE ALSO
-       logwatch(8), system log analyzer and reporter
-
-README FILES
-       README, an overview of amavis-logwatch
-       Changes, the version change list history
-       Bugs, a list of the current bugs or other inadequacies
-       Makefile, the rudimentary installer
-       LICENSE, the usage and redistribution licensing terms
-
-LICENSE
-       Covered under the included MIT/X-Consortium License:
-       http://www.opensource.org/licenses/mit-license.php
-
-
-AUTHOR(S)
-       Mike Cappella
-
-       The original amavis Logwatch filter was written by Jim O'Halloran, and
-       has had many contributors over the years.  They are entirely not
-       responsible for any errors, problems or failures since the current
-       author's hands have touched the source code.
-
-
-
-                                                            AMAVIS-LOGWATCH(1)
-