GNUmakefile

   1 #
   2 # Example makefile using mjotex and a BibTeX references database.
   3 #
   4
   5 # The latex compiler.
   6 LATEX = pdflatex -file-line-error -halt-on-error
   7
   8 # The name of this document.
   9 #
  10 # For example, to use the name of our parent directory:
  11 #
  12 # PN = $(notdir $(realpath .))
  13 #
  14 PN = examples
  15
  16 # A space-separated list of bib files. These must all belong to paths
  17 # contained in your $BIBINPUTS environment variable.
  18 #
  19 # Leave commented if you don't use a bibliography database.
  20 #
  21 BIBS = local-references.bib
  22
  23 # A space-separated list of the mjotex files that you use. The path to
  24 # mjotex must be contain in your $TEXINPUTS environment variable.
  25 #
  26 # MJOTEX  = mjotex.sty
  27 #
  28 MJOTEX  = mjo-algebra.tex mjo-algorithm.tex mjo-arrow.tex mjo-calculus.tex
  29 MJOTEX += mjo-common.tex mjo-complex.tex mjo-cone.tex mjo-convex.tex
  30 MJOTEX += mjo-eja.tex mjo-font.tex mjo-linear_algebra.tex mjo-listing.tex
  31 MJOTEX += mjo-misc.tex mjo-proof_by_cases.tex mjo-theorem.tex
  32 MJOTEX += mjo-theorem-star.tex mjo-topology.tex mjo.bst
  33
  34 # Compile a list of raw source code listings (*.listing) and their
  35 # associated output files (*.py) that will be tested by check-sage.
  36 SAGE_LISTING_SRCS = $(wildcard sage_listings/*.listing)
  37 SAGE_LISTING_DSTS = $(patsubst %.listing,%.py,$(SAGE_LISTING_SRCS))
  38
  39 # A space-separated list of indices (just their names). Usually you'll
  40 # have just one, and it will be named the same thing as your document,
  41 # because that's what the makeidx package does.
  42 #
  43 # Leave commented if you don't use an index.
  44 #
  45 INDICES = $(PN)
  46
  47 # Use kpsewhich (from the kpathsea suite) to find the absolute paths
  48 # of the bibtex/mjotex files listed in in $(BIBS)/$(MJOTEX). The SRCS
  49 # variable should contain all (Bib)TeX source files for the document.
  50 SRCS = $(PN).tex
  51 ifdef BIBS
  52 BIBPATHS = $(shell kpsewhich $(BIBS))
  53 SRCS += $(BIBPATHS)
  54 endif
  55 ifdef MJOTEX
  56 MJOTEXPATHS = $(shell kpsewhich $(MJOTEX))
  57 SRCS += $(MJOTEXPATHS)
  58 endif
  59 ifdef SAGE_LISTING_DSTS
  60 SRCS += $(SAGE_LISTING_DSTS)
  61 endif
  62
  63 ifdef INDICES
  64 INDEX_SRCS = $(addsuffix .idx,$(INDICES))
  65 INDEX_DSTS = $(addsuffix .ind,$(INDICES))
  66 endif
  67
  68 # The first target is the default, so put the PDF document first.
  69 #
  70 # This voodoo is all designed to find a "fixed point" of calling
  71 # $(LATEX). When you build a LaTeX document, it requires an unknown
  72 # number of compilation passes. How do you know when to stop? Easy,
  73 # stop when the output file stops changing! But how to encode that
  74 # in a makefile?
  75 #
  76 # At the start of this target, we call $(LATEX) to compile $(PN).tex.
  77 # If you ignore the "sed" for now, then the next step is to check for
  78 # the existence of a "previous" file. If there isn't one, this is the
  79 # first time that we've tried to build the PDF. In that case, take the
  80 # PDF that we've just built and make *that* the previous file. Then
  81 # start all over. If there is a previous file, then this is the second
  82 # (or more) time that we've tried to build the PDF. We diff the PDF
  83 # file that we've just built against the previous file; if they're the
  84 # same, then we've succeeded and stop. Otherwise, we make the new PDF
  85 # the previous file, and start all over. The end result is that we
  86 # will loop until the newly-created PDF and the previous file are
  87 # identical.
  88 #
  89 # But what about the "sed" call? By default, pdflatex will compile the
  90 # creation date, modification date, and a unique ID into the output
  91 # PDF. That means that two otherwise-identical documents, created
  92 # seconds apart, will look different. We only need to know when the
  93 # *contents* of the document are the same -- we don't care about the
  94 # metadata -- so sed is used to remove those three nondeterministic
  95 # pieces of information.
  96 #
  97 # The creation and modification dates should become optional in pdftex
  98 # v1.40.17 thanks to Debian's SOURCE_DATE_EPOCH initiative. When that
  99 # version of pdflatex makes it into TeX Live 2016, we can replace
 100 # those two sed scripts with something smarter.
 101 #
 102 $(PN).pdf: $(SRCS) $(PN).bbl $(INDEX_DSTS)
 103         $(LATEX) $(PN).tex
 104
 105         sed --in-place \
 106             -e '/^\/ID \[<.*>\]/d' \
 107             -e "s/^\/\(ModDate\) (.*)/\/\1 (D:19700101000000Z00'00')/" \
 108             -e "s/^\/\(CreationDate\) (.*)/\/\\1 (D:19700101000000Z00'00')/" \
 109             $@
 110
 111         if [ ! -f $@.previous ]; then \
 112                 mv $@ $@.previous; \
 113                 $(MAKE) $@; \
 114         fi;
 115
 116         if cmp -s $@ $@.previous; then \
 117                 rm $@.previous; \
 118         else \
 119                 mv $@ $@.previous; \
 120                 $(MAKE) $@; \
 121         fi;
 122
 123
 124 $(PN).aux: $(SRCS)
 125         $(LATEX) $(PN).tex
 126
 127
 128 ifdef INDICES
 129 # We need to be able to build the index source files without involving
 130 # the main $(PN).pdf rule, in order to avoid a chicken-and-egg problem.
 131 # This is similar to the $(PN).aux rule above, except that an index is
 132 # optional and there might be more than one of them.
 133 $(INDEX_SRCS): $(PN).tex
 134         $(LATEX) $(PN).tex
 135 endif
 136
 137 ifdef INDICES
 138 # Create real indices from source files by running "makeindex" on
 139 # them. We depend on SRCS here because we *do* want to rebuild the
 140 # index if the source document changes, but we use an order-only
 141 # dependency (see the bbl rule below) on the idx files to prevent us
 142 # from going into a rebuild loop when the idx files are regenerated.
 143 %.ind: $(SRCS) | %.idx
 144         makeindex $|
 145 endif
 146
 147 # The pipe below indicates an "order-only dependency" on the aux file.
 148 # Without it, every compilation of $(PN).tex would produce a new
 149 # $(PN).aux, and thus $(PN).bbl would be rebuilt. This in turn causes
 150 # $(PN).pdf to appear out-of-date, which leads to a recompilation of
 151 # $(PN).tex... and so on. The order-only dependency means we won't
 152 # rebuild $(PN).bbl if $(PN).aux changes.
 153 #
 154 # As a side effect, we now need to depend on $(SRCS) here, since we
 155 # won't pick it up transitively from $(PN).aux.
 156 #
 157 # If the $BIBS variable is undefined, we presume that there are no
 158 # references and create an empty bbl file. Otherwise, we risk trying
 159 # to run biblatex on an aux file containing no citations. If you do
 160 # define $BIBS but don't cite anything, you'll run into a similar
 161 # problem. Don't do that.
 162 #
 163 $(PN).bbl: $(SRCS) | $(PN).aux
 164 ifdef BIBS
 165         bibtex $(PN).aux
 166 else
 167         echo -n '' > $@
 168 endif
 169
 170 # If the output PDF exists but the log file does not, then an attempt
 171 # to "build the log file" (i.e. build the PDF) would do nothing. Thus
 172 # whenever the log file does not exist, we do a fresh build.
 173 $(PN).log: $(SRCS)
 174         $(MAKE) clean
 175         $(MAKE)
 176
 177 # How do we convert a raw listing into something testable by sage? We
 178 # append/prepend triple quotes to make the whole thing into a doctest,
 179 # and then we replace any blank lines by "<BLANKLINE>".
 180 sage_listings/%.py: sage_listings/%.listing
 181         echo '"""' > $@ && cat $< >> $@ && echo '"""' >> $@ && sed -i 's/^[[:space:]]*$$/<BLANKLINE>/' $@
 182
 183 # Ensure that there are no overfull or underfull boxes in the output
 184 # document by parsing the log for said warnings.
 185 .PHONY: check-boxes
 186 check-boxes: $(PN).log
 187         @! grep -i 'overfull\|underfull' $<
 188
 189 # Run chktex to find silly mistakes. There is some exit code weirdness
 190 # (Savannah bug 53129), so we just look for empty output.
 191 .PHONY: check-chktex
 192 CHKTEX = chktex --localrc .chktexrc --quiet --inputfiles=0
 193 check-chktex:
 194         @[ -z "$(shell $(CHKTEX) mjotex.sty)" ]
 195
 196 # Ensure that there are no undefined references in the document by
 197 # parsing the log file for said warnings.
 198 .PHONY: check-undefined
 199 check-undefined: $(PN).log
 200         @! grep -i 'undefined' $<
 201
 202 # Use sage to doctest any \sagelisting{}s in SAGE_LISTING_DSTS.
 203 # The actuall command is ifdef'd so that we can comment out
 204 # the definition of SAGE_LISTING_DSTS without breaking the
 205 # default definition of the "check" target.
 206 .PHONY: check-sage
 207 check-sage: $(SAGE_LISTING_DSTS)
 208 ifdef SAGE_LISTING_DSTS
 209         sage -t --timeout=0 --memlimit=0 $^
 210 endif
 211
 212 # Run a suite of checks.
 213 .PHONY: check
 214 check: check-boxes check-chktex check-undefined check-sage
 215
 216 # Clean up leftover junk. This only looks overcomplicated because
 217 # the *.{foo,bar} syntax supported by Bash is not POSIX, and Make
 218 # will execute these commands using /bin/sh (which should be POSIX).
 219 JUNK_EXTENSIONS  = aux bbl bcf blg glo ilg ist listing lof log nav out pdf
 220 JUNK_EXTENSIONS += snm spl toc xml
 221 .PHONY: clean
 222 clean:
 223         for ext in $(JUNK_EXTENSIONS); do rm -f *.$$ext; done;
 224         rm -rf dist/
 225         rm -f $(SAGE_LISTING_DSTS) $(INDEX_SRCS) $(INDEX_DSTS)
 226
 227 # If this document will be published, the publisher isn't going to
 228 # have your BibTeX database or your mjotex files. So, you need to
 229 # package them up along with the code for your document. This target
 230 # will create a "dist" directory and copy the necessary stuff there.
 231 #
 232 .PHONY: dist
 233 dist: $(PN).bbl
 234         mkdir -p dist
 235         cp $(SRCS) $(PN).bbl $(BIBPATHS) $(MJOTEXPATHS) dist/