]> gitweb.michael.orlitzky.com - spline3.git/log
spline3.git
13 years agoFix (I think) the cube offset issue.
Michael Orlitzky [Fri, 2 Sep 2011 16:41:17 +0000 (12:41 -0400)]
Fix (I think) the cube offset issue.

13 years agoFinish the precomputed_volume optimization.
Michael Orlitzky [Fri, 2 Sep 2011 15:03:12 +0000 (11:03 -0400)]
Finish the precomputed_volume optimization.

13 years agoFix a few test warnings.
Michael Orlitzky [Fri, 2 Sep 2011 14:48:40 +0000 (10:48 -0400)]
Fix a few test warnings.

13 years agoBegin writing the precomputed_volume feature again.
Michael Orlitzky [Fri, 2 Sep 2011 14:47:06 +0000 (10:47 -0400)]
Begin writing the precomputed_volume feature again.

13 years agoRevert "Attempt to use precomputed volumes everywhere, tests fail en masse."
Michael Orlitzky [Fri, 2 Sep 2011 14:35:06 +0000 (10:35 -0400)]
Revert "Attempt to use precomputed volumes everywhere, tests fail en masse."

This reverts commit ffc644b4eaf951619bfe59a2050f455814263cb2.

13 years agoAttempt to use precomputed volumes everywhere, tests fail en masse.
Michael Orlitzky [Fri, 2 Sep 2011 13:34:42 +0000 (09:34 -0400)]
Attempt to use precomputed volumes everywhere, tests fail en masse.

13 years agoAdd a new test group, slow_tests, that is run after all of the others.
Michael Orlitzky [Fri, 2 Sep 2011 13:16:16 +0000 (09:16 -0400)]
Add a new test group, slow_tests, that is run after all of the others.

13 years agoMake test_trilinear9x9x9_reproduced slow again.
Michael Orlitzky [Fri, 2 Sep 2011 13:15:12 +0000 (09:15 -0400)]
Make test_trilinear9x9x9_reproduced slow again.
Add a new failing test: prop_cube_indices_never_go_out_of_bounds.

13 years agoAdd another guard on calculate_containing_cube_coordinate.
Michael Orlitzky [Fri, 2 Sep 2011 13:13:55 +0000 (09:13 -0400)]
Add another guard on calculate_containing_cube_coordinate.

13 years agoLimit the size of arbitrary Values3D, and prevent empty dimensions.
Michael Orlitzky [Fri, 2 Sep 2011 13:09:23 +0000 (09:09 -0400)]
Limit the size of arbitrary Values3D, and prevent empty dimensions.

13 years agoFix the broken Arbitrary instance of Values3D.
Michael Orlitzky [Fri, 2 Sep 2011 03:17:15 +0000 (23:17 -0400)]
Fix the broken Arbitrary instance of Values3D.

13 years agoSpeed up the Tetrahedron contains_point function by dropping the useless factor of...
Michael Orlitzky [Fri, 2 Sep 2011 02:13:04 +0000 (22:13 -0400)]
Speed up the Tetrahedron contains_point function by dropping the useless factor of its volume.

13 years agoUse an IArray for the cubes and cube_at functions.
Michael Orlitzky [Fri, 2 Sep 2011 00:23:57 +0000 (20:23 -0400)]
Use an IArray for the cubes and cube_at functions.

13 years agoAdd the data folder with a .gitignore.
Michael Orlitzky [Thu, 1 Sep 2011 17:20:09 +0000 (13:20 -0400)]
Add the data folder with a .gitignore.

13 years agoAdd tests for some functions used in the new 'find_containing_tetrahedron'.
Michael Orlitzky [Thu, 1 Sep 2011 17:02:23 +0000 (13:02 -0400)]
Add tests for some functions used in the new 'find_containing_tetrahedron'.

13 years agoReplace the 'find_containing_tetrahedra' function with a more-efficient 'find_contain...
Michael Orlitzky [Thu, 1 Sep 2011 17:01:45 +0000 (13:01 -0400)]
Replace the 'find_containing_tetrahedra' function with a more-efficient 'find_containing_tetrahedron'.

13 years agoAdd the 'disjoint' function.
Michael Orlitzky [Thu, 1 Sep 2011 16:58:37 +0000 (12:58 -0400)]
Add the 'disjoint' function.

13 years agoEven more Tetrahedron de-dupe.
Michael Orlitzky [Wed, 31 Aug 2011 18:14:26 +0000 (14:14 -0400)]
Even more Tetrahedron de-dupe.

13 years agoRemove some completed TODO entries.
Michael Orlitzky [Wed, 31 Aug 2011 18:03:58 +0000 (14:03 -0400)]
Remove some completed TODO entries.

13 years agoSpeed up the trilinear9x9x9 test.
Michael Orlitzky [Wed, 31 Aug 2011 18:02:12 +0000 (14:02 -0400)]
Speed up the trilinear9x9x9 test.

13 years agoDe-dupe some more Tetrahedron tests.
Michael Orlitzky [Wed, 31 Aug 2011 17:59:32 +0000 (13:59 -0400)]
De-dupe some more Tetrahedron tests.

13 years agoAdd -fno-spec-constr-count to the GHC command line.
Michael Orlitzky [Wed, 31 Aug 2011 13:28:46 +0000 (09:28 -0400)]
Add -fno-spec-constr-count to the GHC command line.

13 years agoCombine some Tetrahedron tests.
Michael Orlitzky [Tue, 30 Aug 2011 20:47:28 +0000 (16:47 -0400)]
Combine some Tetrahedron tests.
Whitespace cleanup.

13 years agoReduce more duplication in the Grid tests.
Michael Orlitzky [Tue, 30 Aug 2011 18:30:35 +0000 (14:30 -0400)]
Reduce more duplication in the Grid tests.

13 years agoFix two minor hLint warnings.
Michael Orlitzky [Tue, 30 Aug 2011 18:17:26 +0000 (14:17 -0400)]
Fix two minor hLint warnings.

13 years agoCombine a bunch of Grid tests into a Test.Framework testGroup so that we can take...
Michael Orlitzky [Tue, 30 Aug 2011 17:29:44 +0000 (13:29 -0400)]
Combine a bunch of Grid tests into a Test.Framework testGroup so that we can take advantage of local variable reuse.

13 years agoFix some more hLint warnings.
Michael Orlitzky [Tue, 30 Aug 2011 11:34:37 +0000 (07:34 -0400)]
Fix some more hLint warnings.

13 years agoClean up some hLint warnings.
Michael Orlitzky [Mon, 29 Aug 2011 23:14:55 +0000 (19:14 -0400)]
Clean up some hLint warnings.

13 years agoAdd the current Main module, which works alrightish.
Michael Orlitzky [Mon, 29 Aug 2011 23:09:28 +0000 (19:09 -0400)]
Add the current Main module, which works alrightish.

13 years agoModify the Grid module to use ScaleFactors.
Michael Orlitzky [Mon, 29 Aug 2011 23:06:38 +0000 (19:06 -0400)]
Modify the Grid module to use ScaleFactors.

13 years agoModify the Values module to use ScaleFactors instead of Ints.
Michael Orlitzky [Mon, 29 Aug 2011 23:02:31 +0000 (19:02 -0400)]
Modify the Values module to use ScaleFactors instead of Ints.

13 years agoIncrease theta by an order of magnitude, fixing one particularly bad case.
Michael Orlitzky [Mon, 29 Aug 2011 23:01:54 +0000 (19:01 -0400)]
Increase theta by an order of magnitude, fixing one particularly bad case.

13 years agoAdd the ScaleFactor module and type, allowing us to scale (x,y,z) independently.
Michael Orlitzky [Mon, 29 Aug 2011 23:01:21 +0000 (19:01 -0400)]
Add the ScaleFactor module and type, allowing us to scale (x,y,z) independently.

13 years agoTranspose all of the example lists.
Michael Orlitzky [Sun, 28 Aug 2011 22:55:02 +0000 (18:55 -0400)]
Transpose all of the example lists.

13 years agoAdd the Misc.transpose_xz function.
Michael Orlitzky [Sun, 28 Aug 2011 22:49:43 +0000 (18:49 -0400)]
Add the Misc.transpose_xz function.

13 years agoUn-transpose the x,z coordinates in the Values.idx function.
Michael Orlitzky [Sun, 28 Aug 2011 22:48:43 +0000 (18:48 -0400)]
Un-transpose the x,z coordinates in the Values.idx function.

13 years agoFix the tetrahedron collision detection.
Michael Orlitzky [Sun, 28 Aug 2011 21:45:07 +0000 (17:45 -0400)]
Fix the tetrahedron collision detection.
Update the test for the collision detection (it was wrong).

13 years agoAdd the theta tolerance and nearly_equals, nearly_ge comparisons.
Michael Orlitzky [Sun, 28 Aug 2011 01:13:03 +0000 (21:13 -0400)]
Add the theta tolerance and nearly_equals, nearly_ge comparisons.

13 years agoMove the tetrahedra collision sensitivity test before the tests that take a long...
Michael Orlitzky [Sun, 28 Aug 2011 01:12:30 +0000 (21:12 -0400)]
Move the tetrahedra collision sensitivity test before the tests that take a long time.

13 years agoAdd another 1x20x1 example vector.
Michael Orlitzky [Sun, 28 Aug 2011 01:12:00 +0000 (21:12 -0400)]
Add another 1x20x1 example vector.

13 years agoMake cube_at either return a cube or error instead of returning a (Maybe Cube).
Michael Orlitzky [Sun, 28 Aug 2011 00:04:20 +0000 (20:04 -0400)]
Make cube_at either return a cube or error instead of returning a (Maybe Cube).

13 years agoAdd a test: test_tetrahedra_collision_sensitivity.
Michael Orlitzky [Sat, 27 Aug 2011 23:49:51 +0000 (19:49 -0400)]
Add a test: test_tetrahedra_collision_sensitivity.

13 years agoAdd the Values module to Everything.
Michael Orlitzky [Sat, 27 Aug 2011 23:08:20 +0000 (19:08 -0400)]
Add the Values module to Everything.

13 years agoCorrect an error in the value_at function.
Michael Orlitzky [Fri, 26 Aug 2011 14:30:38 +0000 (10:30 -0400)]
Correct an error in the value_at function.
Add some doctests for the value_at function.

13 years agoChoose a nearby value instead of zero when asked for a nonexistent function value.
Michael Orlitzky [Fri, 26 Aug 2011 07:40:19 +0000 (03:40 -0400)]
Choose a nearby value instead of zero when asked for a nonexistent function value.

13 years agoReplace TypeSynonymInstances with FlexibleInstances (makes GHC 7.2.1 happy) everywhere.
Michael Orlitzky [Wed, 24 Aug 2011 20:21:27 +0000 (16:21 -0400)]
Replace TypeSynonymInstances with FlexibleInstances (makes GHC 7.2.1 happy) everywhere.

13 years agoRemove an unused Misc import.
Michael Orlitzky [Wed, 24 Aug 2011 17:06:46 +0000 (13:06 -0400)]
Remove an unused Misc import.
Switch the 'x' and 'z' axes of cube_at.
Fix calculate_containing_cube_coordinate so that it actually works.

13 years agoInline the two inner functions of the zoom traversal.
Michael Orlitzky [Wed, 24 Aug 2011 17:05:46 +0000 (13:05 -0400)]
Inline the two inner functions of the zoom traversal.

13 years agoRemove the x_coord, y_coord, and z_coord functions from Point.
Michael Orlitzky [Wed, 24 Aug 2011 16:40:43 +0000 (12:40 -0400)]
Remove the x_coord, y_coord, and z_coord functions from Point.

13 years agoChange "find_containing_cubes" to "find_containing_cube" and speed it up considerably.
Michael Orlitzky [Wed, 24 Aug 2011 14:53:28 +0000 (10:53 -0400)]
Change "find_containing_cubes" to "find_containing_cube" and speed it up considerably.

13 years agoUndo the previous FunctionValues test fix.
Michael Orlitzky [Wed, 24 Aug 2011 14:12:52 +0000 (10:12 -0400)]
Undo the previous FunctionValues test fix.
Update the Values.idx function to silently switch the 'x' and 'z' dimensions.

13 years agoRename example names to 'examples_list' and 'examples' instead of 'examples' and...
Michael Orlitzky [Wed, 24 Aug 2011 14:11:54 +0000 (10:11 -0400)]
Rename example names to 'examples_list' and 'examples' instead of 'examples' and 'examples_repa' respectively. This prevents having to update all of the test code.

13 years agoStart converting the tests to Repa.
Michael Orlitzky [Tue, 23 Aug 2011 21:41:04 +0000 (17:41 -0400)]
Start converting the tests to Repa.

13 years agoThrow an error when comparing two RealFunctions for equality.
Michael Orlitzky [Tue, 23 Aug 2011 20:28:56 +0000 (16:28 -0400)]
Throw an error when comparing two RealFunctions for equality.
Print RealFunctions within angled brackets, i.e. "<RealFunction>".

13 years agoConvert the zoom function to use Values3D.
Michael Orlitzky [Tue, 23 Aug 2011 20:24:32 +0000 (16:24 -0400)]
Convert the zoom function to use Values3D.

13 years agoWrite the output file in main.
Michael Orlitzky [Tue, 23 Aug 2011 20:23:58 +0000 (16:23 -0400)]
Write the output file in main.

13 years agoBegin updating everything to use Repa arrays (Values3D).
Michael Orlitzky [Tue, 23 Aug 2011 18:40:35 +0000 (14:40 -0400)]
Begin updating everything to use Repa arrays (Values3D).

13 years agoAdd "-threaded" to GHC_OPTIONS.
Michael Orlitzky [Tue, 23 Aug 2011 18:38:41 +0000 (14:38 -0400)]
Add "-threaded" to GHC_OPTIONS.

13 years agoAdd the Values module, wrapping the Repa stuff.
Michael Orlitzky [Tue, 23 Aug 2011 16:54:19 +0000 (12:54 -0400)]
Add the Values module, wrapping the Repa stuff.

13 years agoBegin playing with Repa.
Michael Orlitzky [Tue, 23 Aug 2011 03:07:00 +0000 (23:07 -0400)]
Begin playing with Repa.

13 years agoAdd "-rtsopts" to my GHC_OPTIONS.
Michael Orlitzky [Tue, 23 Aug 2011 03:05:34 +0000 (23:05 -0400)]
Add "-rtsopts" to my GHC_OPTIONS.

13 years agoRemove two unused variables.
Michael Orlitzky [Mon, 22 Aug 2011 23:56:48 +0000 (19:56 -0400)]
Remove two unused variables.

13 years agoAdd the trilinear_zoom_2 example.
Michael Orlitzky [Mon, 22 Aug 2011 19:49:11 +0000 (15:49 -0400)]
Add the trilinear_zoom_2 example.
Fix a comment.

13 years agoFix the "clean" target in the makefile to remove *.hi and *.o files from /tmp.
Michael Orlitzky [Mon, 22 Aug 2011 19:38:24 +0000 (15:38 -0400)]
Fix the "clean" target in the makefile to remove *.hi and *.o files from /tmp.

13 years agoAdd the "zoom" function.
Michael Orlitzky [Mon, 22 Aug 2011 19:33:28 +0000 (15:33 -0400)]
Add the "zoom" function.

13 years agoRename "trilinearx2" to "trilinear9x9x9".
Michael Orlitzky [Mon, 22 Aug 2011 19:06:38 +0000 (15:06 -0400)]
Rename "trilinearx2" to "trilinear9x9x9".

13 years agoRemove the individual tetrahedron positive volume tests.
Michael Orlitzky [Mon, 22 Aug 2011 18:07:29 +0000 (14:07 -0400)]
Remove the individual tetrahedron positive volume tests.

13 years agoReplace individual tetrahedron volume tests with combined ones.
Michael Orlitzky [Mon, 22 Aug 2011 18:02:49 +0000 (14:02 -0400)]
Replace individual tetrahedron volume tests with combined ones.

13 years agoRename "tetrahedrons" to "tetrahedra".
Michael Orlitzky [Mon, 22 Aug 2011 17:57:56 +0000 (13:57 -0400)]
Rename "tetrahedrons" to "tetrahedra".

13 years agoGroup all of the "trilinear reproduced" tests together.
Michael Orlitzky [Mon, 22 Aug 2011 17:54:44 +0000 (13:54 -0400)]
Group all of the "trilinear reproduced" tests together.

13 years agoAdd the trilinearx2 reproduction test.
Michael Orlitzky [Wed, 17 Aug 2011 22:30:01 +0000 (18:30 -0400)]
Add the trilinearx2 reproduction test.

13 years agoAdd the trilinearx2 example.
Michael Orlitzky [Wed, 17 Aug 2011 22:29:16 +0000 (18:29 -0400)]
Add the trilinearx2 example.

13 years agoFix all orphan instances.
Michael Orlitzky [Thu, 4 Aug 2011 17:01:03 +0000 (13:01 -0400)]
Fix all orphan instances.

13 years agoFix some property tests now that all of the tetrahedra are defined properly.
Michael Orlitzky [Thu, 4 Aug 2011 16:46:00 +0000 (12:46 -0400)]
Fix some property tests now that all of the tetrahedra are defined properly.
Re-enable some tests that were failing but now pass.

13 years agoFix 'rotate' argument order in some tests.
Michael Orlitzky [Thu, 4 Aug 2011 16:45:30 +0000 (12:45 -0400)]
Fix 'rotate' argument order in some tests.

13 years agoSwitch all of the tetrahedronX functions to use the new 'rotate' argument order.
Michael Orlitzky [Thu, 4 Aug 2011 16:44:01 +0000 (12:44 -0400)]
Switch all of the tetrahedronX functions to use the new 'rotate' argument order.
Use (rotate $ rotate $ ...) notation instead of composing rotations.
Fix all tetrahedron functions so that the trilinear reproduction tests pass.

13 years agoSwitch the order of the arguments to the 'rotate' function.
Michael Orlitzky [Thu, 4 Aug 2011 16:43:27 +0000 (12:43 -0400)]
Switch the order of the arguments to the 'rotate' function.

13 years agoAdd some new warnings for GHC7.
Michael Orlitzky [Wed, 27 Jul 2011 19:20:19 +0000 (15:20 -0400)]
Add some new warnings for GHC7.

13 years agoRemove a useless import.
Michael Orlitzky [Fri, 15 Jul 2011 15:49:05 +0000 (11:49 -0400)]
Remove a useless import.
Output *.hi and *.o files to /tmp.
A tiny bit of makefile cleanup.

13 years agoFix the ccwz rotations.
Michael Orlitzky [Sun, 10 Jul 2011 20:41:16 +0000 (16:41 -0400)]
Fix the ccwz rotations.

13 years agoAdd 23 more tests for trilinear reproduction, testing the remaining tetrahedra.
Michael Orlitzky [Sun, 10 Jul 2011 17:22:09 +0000 (13:22 -0400)]
Add 23 more tests for trilinear reproduction, testing the remaining tetrahedra.

13 years agoRe-export the modules in Everything.hs.
Michael Orlitzky [Sun, 10 Jul 2011 16:49:02 +0000 (12:49 -0400)]
Re-export the modules in Everything.hs.

13 years agoAdded a find_containing_tetrahedra function to the Cube module.
Michael Orlitzky [Sun, 10 Jul 2011 15:36:44 +0000 (11:36 -0400)]
Added a find_containing_tetrahedra function to the Cube module.

13 years agoAdd a find_containing_cubes function to the Grid module.
Michael Orlitzky [Sun, 10 Jul 2011 15:27:27 +0000 (11:27 -0400)]
Add a find_containing_cubes function to the Grid module.

13 years agoFix some hlint warnings.
Michael Orlitzky [Sat, 9 Jul 2011 03:33:12 +0000 (23:33 -0400)]
Fix some hlint warnings.

13 years agoAdd another TODO item.
Michael Orlitzky [Sat, 9 Jul 2011 03:11:06 +0000 (23:11 -0400)]
Add another TODO item.

13 years agoHide i, j, and k from two Cube imports.
Michael Orlitzky [Sat, 9 Jul 2011 03:01:47 +0000 (23:01 -0400)]
Hide i, j, and k from two Cube imports.

13 years agoRe-enable the non-doc tests.
Michael Orlitzky [Sat, 9 Jul 2011 00:26:34 +0000 (20:26 -0400)]
Re-enable the non-doc tests.
Add a doctest for the flatten function.

13 years agoAdd doctests to the test suite.
Michael Orlitzky [Sat, 9 Jul 2011 00:17:47 +0000 (20:17 -0400)]
Add doctests to the test suite.

13 years agoAdd two examples (doctests) for the factorial function.
Michael Orlitzky [Sat, 9 Jul 2011 00:16:41 +0000 (20:16 -0400)]
Add two examples (doctests) for the factorial function.

13 years agoAdd two new dependencies.
Michael Orlitzky [Sat, 9 Jul 2011 00:16:19 +0000 (20:16 -0400)]
Add two new dependencies.

13 years agoFix some hlint warnings.
Michael Orlitzky [Fri, 8 Jul 2011 21:26:38 +0000 (17:26 -0400)]
Fix some hlint warnings.

13 years agoFinish moving the tests to test-framework.
Michael Orlitzky [Fri, 8 Jul 2011 20:18:31 +0000 (16:18 -0400)]
Finish moving the tests to test-framework.

13 years agoFinish migrating the QuickCheck tests to test-framework.
Michael Orlitzky [Fri, 8 Jul 2011 12:05:24 +0000 (08:05 -0400)]
Finish migrating the QuickCheck tests to test-framework.

13 years agoUncomment the (2.5) cijk1 identity and make a TODO item for it.
Michael Orlitzky [Fri, 8 Jul 2011 12:05:01 +0000 (08:05 -0400)]
Uncomment the (2.5) cijk1 identity and make a TODO item for it.

13 years agoBegin migration to test-framework.
Michael Orlitzky [Thu, 7 Jul 2011 22:59:31 +0000 (18:59 -0400)]
Begin migration to test-framework.

13 years agoAdd three new dependencies to the README.
Michael Orlitzky [Thu, 7 Jul 2011 22:58:51 +0000 (18:58 -0400)]
Add three new dependencies to the README.

13 years agoAdd a new TODO item.
Michael Orlitzky [Thu, 7 Jul 2011 22:58:35 +0000 (18:58 -0400)]
Add a new TODO item.

13 years agoUpdate the TODO.
Michael Orlitzky [Mon, 4 Jul 2011 20:56:26 +0000 (16:56 -0400)]
Update the TODO.

13 years agoAdd tests to ensure that the zero function and a trilinear function are reproduced...
Michael Orlitzky [Mon, 4 Jul 2011 17:52:37 +0000 (13:52 -0400)]
Add tests to ensure that the zero function and a trilinear function are reproduced correctly.